#include <linux/console.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <asm/atarihw.h>
#include <asm/atariints.h>
-extern char m68k_debug_device[];
-
-/* Flag that Modem1 port is already initialized and used */
-int atari_MFP_init_done;
-/* Flag that Modem1 port is already initialized and used */
-int atari_SCC_init_done;
/* Can be set somewhere, if a SCC master reset has already be done and should
* not be repeated; used by kgdb */
int atari_SCC_reset_done;
+EXPORT_SYMBOL(atari_SCC_reset_done);
static struct console atari_console_driver = {
- .name = "debug",
- .flags = CON_PRINTBUFFER,
- .index = -1,
+ .name = "debug",
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
};
-static inline void ata_mfp_out (char c)
+static inline void ata_mfp_out(char c)
{
- while (!(mfp.trn_stat & 0x80)) /* wait for tx buf empty */
- barrier ();
- mfp.usart_dta = c;
+ while (!(mfp.trn_stat & 0x80)) /* wait for tx buf empty */
+ barrier();
+ mfp.usart_dta = c;
}
-void atari_mfp_console_write (struct console *co, const char *str,
- unsigned int count)
+static void atari_mfp_console_write(struct console *co, const char *str,
+ unsigned int count)
{
- while (count--) {
- if (*str == '\n')
- ata_mfp_out( '\r' );
- ata_mfp_out( *str++ );
- }
+ while (count--) {
+ if (*str == '\n')
+ ata_mfp_out('\r');
+ ata_mfp_out(*str++);
+ }
}
-static inline void ata_scc_out (char c)
+static inline void ata_scc_out(char c)
{
- do {
+ do {
+ MFPDELAY();
+ } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
MFPDELAY();
- } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
- MFPDELAY();
- scc.cha_b_data = c;
+ scc.cha_b_data = c;
}
-void atari_scc_console_write (struct console *co, const char *str,
- unsigned int count)
+static void atari_scc_console_write(struct console *co, const char *str,
+ unsigned int count)
{
- while (count--) {
- if (*str == '\n')
- ata_scc_out( '\r' );
- ata_scc_out( *str++ );
- }
+ while (count--) {
+ if (*str == '\n')
+ ata_scc_out('\r');
+ ata_scc_out(*str++);
+ }
}
-static inline void ata_midi_out (char c)
+static inline void ata_midi_out(char c)
{
- while (!(acia.mid_ctrl & ACIA_TDRE)) /* wait for tx buf empty */
- barrier ();
- acia.mid_data = c;
+ while (!(acia.mid_ctrl & ACIA_TDRE)) /* wait for tx buf empty */
+ barrier();
+ acia.mid_data = c;
}
-void atari_midi_console_write (struct console *co, const char *str,
- unsigned int count)
+static void atari_midi_console_write(struct console *co, const char *str,
+ unsigned int count)
{
- while (count--) {
- if (*str == '\n')
- ata_midi_out( '\r' );
- ata_midi_out( *str++ );
- }
+ while (count--) {
+ if (*str == '\n')
+ ata_midi_out('\r');
+ ata_midi_out(*str++);
+ }
}
-static int ata_par_out (char c)
+static int ata_par_out(char c)
{
- unsigned char tmp;
- /* This a some-seconds timeout in case no printer is connected */
- unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
-
- while( (mfp.par_dt_reg & 1) && --i ) /* wait for BUSY == L */
- ;
- if (!i) return( 0 );
-
- sound_ym.rd_data_reg_sel = 15; /* select port B */
- sound_ym.wd_data = c; /* put char onto port */
- sound_ym.rd_data_reg_sel = 14; /* select port A */
- tmp = sound_ym.rd_data_reg_sel;
- sound_ym.wd_data = tmp & ~0x20; /* set strobe L */
- MFPDELAY(); /* wait a bit */
- sound_ym.wd_data = tmp | 0x20; /* set strobe H */
- return( 1 );
+ unsigned char tmp;
+ /* This a some-seconds timeout in case no printer is connected */
+ unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
+
+ while ((mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
+ ;
+ if (!i)
+ return 0;
+
+ sound_ym.rd_data_reg_sel = 15; /* select port B */
+ sound_ym.wd_data = c; /* put char onto port */
+ sound_ym.rd_data_reg_sel = 14; /* select port A */
+ tmp = sound_ym.rd_data_reg_sel;
+ sound_ym.wd_data = tmp & ~0x20; /* set strobe L */
+ MFPDELAY(); /* wait a bit */
+ sound_ym.wd_data = tmp | 0x20; /* set strobe H */
+ return 1;
}
-static void atari_par_console_write (struct console *co, const char *str,
- unsigned int count)
+static void atari_par_console_write(struct console *co, const char *str,
+ unsigned int count)
{
- static int printer_present = 1;
-
- if (!printer_present)
- return;
+ static int printer_present = 1;
- while (count--) {
- if (*str == '\n')
- if (!ata_par_out( '\r' )) {
- printer_present = 0;
+ if (!printer_present)
return;
- }
- if (!ata_par_out( *str++ )) {
- printer_present = 0;
- return;
+
+ while (count--) {
+ if (*str == '\n') {
+ if (!ata_par_out('\r')) {
+ printer_present = 0;
+ return;
+ }
+ }
+ if (!ata_par_out(*str++)) {
+ printer_present = 0;
+ return;
+ }
}
- }
}
-#ifdef CONFIG_SERIAL_CONSOLE
+#if 0
int atari_mfp_console_wait_key(struct console *co)
{
- while( !(mfp.rcv_stat & 0x80) ) /* wait for rx buf filled */
- barrier();
- return( mfp.usart_dta );
+ while (!(mfp.rcv_stat & 0x80)) /* wait for rx buf filled */
+ barrier();
+ return mfp.usart_dta;
}
int atari_scc_console_wait_key(struct console *co)
{
- do {
+ do {
+ MFPDELAY();
+ } while (!(scc.cha_b_ctrl & 0x01)); /* wait for rx buf filled */
MFPDELAY();
- } while( !(scc.cha_b_ctrl & 0x01) ); /* wait for rx buf filled */
- MFPDELAY();
- return( scc.cha_b_data );
+ return scc.cha_b_data;
}
int atari_midi_console_wait_key(struct console *co)
{
- while( !(acia.mid_ctrl & ACIA_RDRF) ) /* wait for rx buf filled */
- barrier();
- return( acia.mid_data );
+ while (!(acia.mid_ctrl & ACIA_RDRF)) /* wait for rx buf filled */
+ barrier();
+ return acia.mid_data;
}
#endif
-/* The following two functions do a quick'n'dirty initialization of the MFP or
+/*
+ * The following two functions do a quick'n'dirty initialization of the MFP or
* SCC serial ports. They're used by the debugging interface, kgdb, and the
- * serial console code. */
-#ifndef CONFIG_SERIAL_CONSOLE
-static void __init atari_init_mfp_port( int cflag )
-#else
-void atari_init_mfp_port( int cflag )
-#endif
+ * serial console code.
+ */
+static void __init atari_init_mfp_port(int cflag)
{
- /* timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
- * bps, resp., and work only correct if there's a RSVE or RSSPEED */
- static int baud_table[9] = { 16, 11, 8, 4, 2, 1, 175, 143, 128 };
- int baud = cflag & CBAUD;
- int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x04 : 0x06) : 0;
- int csize = ((cflag & CSIZE) == CS7) ? 0x20 : 0x00;
-
- if (cflag & CBAUDEX)
- baud += B38400;
- if (baud < B1200 || baud > B38400+2)
- baud = B9600; /* use default 9600bps for non-implemented rates */
- baud -= B1200; /* baud_table[] starts at 1200bps */
-
- mfp.trn_stat &= ~0x01; /* disable TX */
- mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
- mfp.tim_ct_cd &= 0x70; /* stop timer D */
- mfp.tim_dt_d = baud_table[baud];
- mfp.tim_ct_cd |= 0x01; /* start timer D, 1:4 */
- mfp.trn_stat |= 0x01; /* enable TX */
-
- atari_MFP_init_done = 1;
+ /*
+ * timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
+ * bps, resp., and work only correct if there's a RSVE or RSSPEED
+ */
+ static int baud_table[9] = { 16, 11, 8, 4, 2, 1, 175, 143, 128 };
+ int baud = cflag & CBAUD;
+ int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x04 : 0x06) : 0;
+ int csize = ((cflag & CSIZE) == CS7) ? 0x20 : 0x00;
+
+ if (cflag & CBAUDEX)
+ baud += B38400;
+ if (baud < B1200 || baud > B38400+2)
+ baud = B9600; /* use default 9600bps for non-implemented rates */
+ baud -= B1200; /* baud_table[] starts at 1200bps */
+
+ mfp.trn_stat &= ~0x01; /* disable TX */
+ mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
+ mfp.tim_ct_cd &= 0x70; /* stop timer D */
+ mfp.tim_dt_d = baud_table[baud];
+ mfp.tim_ct_cd |= 0x01; /* start timer D, 1:4 */
+ mfp.trn_stat |= 0x01; /* enable TX */
}
-#define SCC_WRITE(reg,val) \
- do { \
- scc.cha_b_ctrl = (reg); \
- MFPDELAY(); \
- scc.cha_b_ctrl = (val); \
- MFPDELAY(); \
- } while(0)
+#define SCC_WRITE(reg, val) \
+ do { \
+ scc.cha_b_ctrl = (reg); \
+ MFPDELAY(); \
+ scc.cha_b_ctrl = (val); \
+ MFPDELAY(); \
+ } while (0)
/* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a
* delay of ~ 60us. */
-#define LONG_DELAY() \
- do { \
- int i; \
- for( i = 100; i > 0; --i ) \
- MFPDELAY(); \
- } while(0)
-
-#ifndef CONFIG_SERIAL_CONSOLE
-static void __init atari_init_scc_port( int cflag )
-#else
-void atari_init_scc_port( int cflag )
-#endif
+#define LONG_DELAY() \
+ do { \
+ int i; \
+ for (i = 100; i > 0; --i) \
+ MFPDELAY(); \
+ } while (0)
+
+static void __init atari_init_scc_port(int cflag)
{
- extern int atari_SCC_reset_done;
- static int clksrc_table[9] =
- /* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
- { 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
- static int brgsrc_table[9] =
- /* reg 14: 0 = RTxC, 2 = PCLK */
- { 2, 2, 2, 2, 2, 2, 0, 2, 2 };
- static int clkmode_table[9] =
- /* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */
- { 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 };
- static int div_table[9] =
- /* reg12 (BRG low) */
- { 208, 138, 103, 50, 24, 11, 1, 0, 0 };
-
- int baud = cflag & CBAUD;
- int clksrc, clkmode, div, reg3, reg5;
-
- if (cflag & CBAUDEX)
- baud += B38400;
- if (baud < B1200 || baud > B38400+2)
- baud = B9600; /* use default 9600bps for non-implemented rates */
- baud -= B1200; /* tables starts at 1200bps */
-
- clksrc = clksrc_table[baud];
- clkmode = clkmode_table[baud];
- div = div_table[baud];
- if (ATARIHW_PRESENT(TT_MFP) && baud >= 6) {
- /* special treatment for TT, where rates >= 38400 are done via TRxC */
- clksrc = 0x28; /* TRxC */
- clkmode = baud == 6 ? 0xc0 :
- baud == 7 ? 0x80 : /* really 76800bps */
- 0x40; /* really 153600bps */
- div = 0;
- }
-
- reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40;
- reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */;
-
- (void)scc.cha_b_ctrl; /* reset reg pointer */
- SCC_WRITE( 9, 0xc0 ); /* reset */
- LONG_DELAY(); /* extra delay after WR9 access */
- SCC_WRITE( 4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
- 0x04 /* 1 stopbit */ |
- clkmode );
- SCC_WRITE( 3, reg3 );
- SCC_WRITE( 5, reg5 );
- SCC_WRITE( 9, 0 ); /* no interrupts */
- LONG_DELAY(); /* extra delay after WR9 access */
- SCC_WRITE( 10, 0 ); /* NRZ mode */
- SCC_WRITE( 11, clksrc ); /* main clock source */
- SCC_WRITE( 12, div ); /* BRG value */
- SCC_WRITE( 13, 0 ); /* BRG high byte */
- SCC_WRITE( 14, brgsrc_table[baud] );
- SCC_WRITE( 14, brgsrc_table[baud] | (div ? 1 : 0) );
- SCC_WRITE( 3, reg3 | 1 );
- SCC_WRITE( 5, reg5 | 8 );
-
- atari_SCC_reset_done = 1;
- atari_SCC_init_done = 1;
+ extern int atari_SCC_reset_done;
+ static int clksrc_table[9] =
+ /* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
+ { 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
+ static int brgsrc_table[9] =
+ /* reg 14: 0 = RTxC, 2 = PCLK */
+ { 2, 2, 2, 2, 2, 2, 0, 2, 2 };
+ static int clkmode_table[9] =
+ /* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */
+ { 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 };
+ static int div_table[9] =
+ /* reg12 (BRG low) */
+ { 208, 138, 103, 50, 24, 11, 1, 0, 0 };
+
+ int baud = cflag & CBAUD;
+ int clksrc, clkmode, div, reg3, reg5;
+
+ if (cflag & CBAUDEX)
+ baud += B38400;
+ if (baud < B1200 || baud > B38400+2)
+ baud = B9600; /* use default 9600bps for non-implemented rates */
+ baud -= B1200; /* tables starts at 1200bps */
+
+ clksrc = clksrc_table[baud];
+ clkmode = clkmode_table[baud];
+ div = div_table[baud];
+ if (ATARIHW_PRESENT(TT_MFP) && baud >= 6) {
+ /* special treatment for TT, where rates >= 38400 are done via TRxC */
+ clksrc = 0x28; /* TRxC */
+ clkmode = baud == 6 ? 0xc0 :
+ baud == 7 ? 0x80 : /* really 76800bps */
+ 0x40; /* really 153600bps */
+ div = 0;
+ }
+
+ reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40;
+ reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */;
+
+ (void)scc.cha_b_ctrl; /* reset reg pointer */
+ SCC_WRITE(9, 0xc0); /* reset */
+ LONG_DELAY(); /* extra delay after WR9 access */
+ SCC_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03)
+ : 0 | 0x04 /* 1 stopbit */ | clkmode);
+ SCC_WRITE(3, reg3);
+ SCC_WRITE(5, reg5);
+ SCC_WRITE(9, 0); /* no interrupts */
+ LONG_DELAY(); /* extra delay after WR9 access */
+ SCC_WRITE(10, 0); /* NRZ mode */
+ SCC_WRITE(11, clksrc); /* main clock source */
+ SCC_WRITE(12, div); /* BRG value */
+ SCC_WRITE(13, 0); /* BRG high byte */
+ SCC_WRITE(14, brgsrc_table[baud]);
+ SCC_WRITE(14, brgsrc_table[baud] | (div ? 1 : 0));
+ SCC_WRITE(3, reg3 | 1);
+ SCC_WRITE(5, reg5 | 8);
+
+ atari_SCC_reset_done = 1;
}
-#ifndef CONFIG_SERIAL_CONSOLE
-static void __init atari_init_midi_port( int cflag )
-#else
-void atari_init_midi_port( int cflag )
-#endif
+static void __init atari_init_midi_port(int cflag)
{
- int baud = cflag & CBAUD;
- int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
- /* warning 7N1 isn't possible! (instead 7O2 is used...) */
- int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x0c : 0x08) : 0x04;
- int div;
-
- /* 4800 selects 7812.5, 115200 selects 500000, all other (incl. 9600 as
- * default) the standard MIDI speed 31250. */
- if (cflag & CBAUDEX)
- baud += B38400;
- if (baud == B4800)
- div = ACIA_DIV64; /* really 7812.5 bps */
- else if (baud == B38400+2 /* 115200 */)
- div = ACIA_DIV1; /* really 500 kbps (does that work??) */
- else
- div = ACIA_DIV16; /* 31250 bps, standard for MIDI */
-
- /* RTS low, ints disabled */
- acia.mid_ctrl = div | csize | parity |
+ int baud = cflag & CBAUD;
+ int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
+ /* warning 7N1 isn't possible! (instead 7O2 is used...) */
+ int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x0c : 0x08) : 0x04;
+ int div;
+
+ /* 4800 selects 7812.5, 115200 selects 500000, all other (incl. 9600 as
+ * default) the standard MIDI speed 31250. */
+ if (cflag & CBAUDEX)
+ baud += B38400;
+ if (baud == B4800)
+ div = ACIA_DIV64; /* really 7812.5 bps */
+ else if (baud == B38400+2 /* 115200 */)
+ div = ACIA_DIV1; /* really 500 kbps (does that work??) */
+ else
+ div = ACIA_DIV16; /* 31250 bps, standard for MIDI */
+
+ /* RTS low, ints disabled */
+ acia.mid_ctrl = div | csize | parity |
((atari_switches & ATARI_SWITCH_MIDI) ?
ACIA_RHTID : ACIA_RLTID);
}
-void __init atari_debug_init(void)
+static int __init atari_debug_setup(char *arg)
{
- if (!strcmp( m68k_debug_device, "ser" )) {
- /* defaults to ser2 for a Falcon and ser1 otherwise */
- strcpy( m68k_debug_device, MACH_IS_FALCON ? "ser2" : "ser1" );
-
- }
-
- if (!strcmp( m68k_debug_device, "ser1" )) {
- /* ST-MFP Modem1 serial port */
- atari_init_mfp_port( B9600|CS8 );
- atari_console_driver.write = atari_mfp_console_write;
- }
- else if (!strcmp( m68k_debug_device, "ser2" )) {
- /* SCC Modem2 serial port */
- atari_init_scc_port( B9600|CS8 );
- atari_console_driver.write = atari_scc_console_write;
- }
- else if (!strcmp( m68k_debug_device, "midi" )) {
- /* MIDI port */
- atari_init_midi_port( B9600|CS8 );
- atari_console_driver.write = atari_midi_console_write;
- }
- else if (!strcmp( m68k_debug_device, "par" )) {
- /* parallel printer */
- atari_turnoff_irq( IRQ_MFP_BUSY ); /* avoid ints */
- sound_ym.rd_data_reg_sel = 7; /* select mixer control */
- sound_ym.wd_data = 0xff; /* sound off, ports are output */
- sound_ym.rd_data_reg_sel = 15; /* select port B */
- sound_ym.wd_data = 0; /* no char */
- sound_ym.rd_data_reg_sel = 14; /* select port A */
- sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x20; /* strobe H */
- atari_console_driver.write = atari_par_console_write;
- }
- if (atari_console_driver.write)
- register_console(&atari_console_driver);
+ if (!MACH_IS_ATARI)
+ return 0;
+
+ if (!strcmp(arg, "ser"))
+ /* defaults to ser2 for a Falcon and ser1 otherwise */
+ arg = MACH_IS_FALCON ? "ser2" : "ser1";
+
+ if (!strcmp(arg, "ser1")) {
+ /* ST-MFP Modem1 serial port */
+ atari_init_mfp_port(B9600|CS8);
+ atari_console_driver.write = atari_mfp_console_write;
+ } else if (!strcmp(arg, "ser2")) {
+ /* SCC Modem2 serial port */
+ atari_init_scc_port(B9600|CS8);
+ atari_console_driver.write = atari_scc_console_write;
+ } else if (!strcmp(arg, "midi")) {
+ /* MIDI port */
+ atari_init_midi_port(B9600|CS8);
+ atari_console_driver.write = atari_midi_console_write;
+ } else if (!strcmp(arg, "par")) {
+ /* parallel printer */
+ atari_turnoff_irq(IRQ_MFP_BUSY); /* avoid ints */
+ sound_ym.rd_data_reg_sel = 7; /* select mixer control */
+ sound_ym.wd_data = 0xff; /* sound off, ports are output */
+ sound_ym.rd_data_reg_sel = 15; /* select port B */
+ sound_ym.wd_data = 0; /* no char */
+ sound_ym.rd_data_reg_sel = 14; /* select port A */
+ sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x20; /* strobe H */
+ atari_console_driver.write = atari_par_console_write;
+ }
+ if (atari_console_driver.write)
+ register_console(&atari_console_driver);
+
+ return 0;
}
-/*
- * Local variables:
- * c-indent-level: 4
- * tab-width: 8
- * End:
- */
+early_param("debug", atari_debug_setup);
git.openpandora.org / pandora-kernel.git / blobdiff