* 61 - 0 since this is not an MSI transaction
* 60:54 - reserved, MBZ
*/
-static uint64_t
+static u64
tioce_dma_d64(unsigned long ct_addr)
{
- uint64_t bus_addr;
+ u64 bus_addr;
bus_addr = ct_addr | (1UL << 63);
* length, and if enough resources exist, fill in the ATE's and construct a
* tioce_dmamap struct to track the mapping.
*/
-static uint64_t
+static u64
tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
- uint64_t ct_addr, int len)
+ u64 ct_addr, int len)
{
int i;
int j;
int entries;
int nates;
int pagesize;
- uint64_t *ate_shadow;
- uint64_t *ate_reg;
- uint64_t addr;
+ u64 *ate_shadow;
+ u64 *ate_reg;
+ u64 addr;
struct tioce *ce_mmr;
- uint64_t bus_base;
+ u64 bus_base;
struct tioce_dmamap *map;
ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base;
if (i > last)
return 0;
- map = kcalloc(1, sizeof(struct tioce_dmamap), GFP_ATOMIC);
+ map = kzalloc(sizeof(struct tioce_dmamap), GFP_ATOMIC);
if (!map)
return 0;
addr = ct_addr;
for (j = 0; j < nates; j++) {
- uint64_t ate;
+ u64 ate;
ate = ATE_MAKE(addr, pagesize);
ate_shadow[i + j] = ate;
*
* Map @paddr into 32-bit bus space of the CE associated with @pcidev_info.
*/
-static uint64_t
-tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr)
+static u64
+tioce_dma_d32(struct pci_dev *pdev, u64 ct_addr)
{
int dma_ok;
int port;
struct tioce *ce_mmr;
struct tioce_kernel *ce_kern;
- uint64_t ct_upper;
- uint64_t ct_lower;
+ u64 ct_upper;
+ u64 ct_lower;
dma_addr_t bus_addr;
ct_upper = ct_addr & ~0x3fffffffUL;
pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
if (ce_kern->ce_port[port].dirmap_refcnt == 0) {
- uint64_t tmp;
+ u64 tmp;
ce_kern->ce_port[port].dirmap_shadow = ct_upper;
writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]);
* Given a TIOCE bus address, set the appropriate bit to indicate barrier
* attributes.
*/
-static uint64_t
-tioce_dma_barrier(uint64_t bus_addr, int on)
+static u64
+tioce_dma_barrier(u64 bus_addr, int on)
{
- uint64_t barrier_bit;
+ u64 barrier_bit;
/* barrier not supported in M40/M40S mode */
if (TIOCE_M40_ADDR(bus_addr) || TIOCE_M40S_ADDR(bus_addr))
list_for_each_entry(map, &ce_kern->ce_dmamap_list,
ce_dmamap_list) {
- uint64_t last;
+ u64 last;
last = map->pci_start + map->nbytes - 1;
if (bus_addr >= map->pci_start && bus_addr <= last)
* This is the main wrapper for mapping host physical pages to CE PCI space.
* The mapping mode used is based on the device's dma_mask.
*/
-static uint64_t
-tioce_do_dma_map(struct pci_dev *pdev, uint64_t paddr, size_t byte_count,
+static u64
+tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count,
int barrier)
{
unsigned long flags;
- uint64_t ct_addr;
- uint64_t mapaddr = 0;
+ u64 ct_addr;
+ u64 mapaddr = 0;
struct tioce_kernel *ce_kern;
struct tioce_dmamap *map;
int port;
- uint64_t dma_mask;
+ u64 dma_mask;
dma_mask = (barrier) ? pdev->dev.coherent_dma_mask : pdev->dma_mask;
* address bits than this device can support.
*/
list_for_each_entry(map, &ce_kern->ce_dmamap_list, ce_dmamap_list) {
- uint64_t last;
+ u64 last;
last = map->ct_start + map->nbytes - 1;
if (ct_addr >= map->ct_start &&
* Simply call tioce_do_dma_map() to create a map with the barrier bit clear
* in the address.
*/
-static uint64_t
-tioce_dma(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
+static u64
+tioce_dma(struct pci_dev *pdev, u64 paddr, size_t byte_count)
{
return tioce_do_dma_map(pdev, paddr, byte_count, 0);
}
*
* Simply call tioce_do_dma_map() to create a map with the barrier bit set
* in the address.
- */ static uint64_t
-tioce_dma_consistent(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
+ */ static u64
+tioce_dma_consistent(struct pci_dev *pdev, u64 paddr, size_t byte_count)
{
return tioce_do_dma_map(pdev, paddr, byte_count, 1);
}
tioce_kern_init(struct tioce_common *tioce_common)
{
int i;
- uint32_t tmp;
+ u32 tmp;
struct tioce *tioce_mmr;
struct tioce_kernel *tioce_kern;
- tioce_kern = kcalloc(1, sizeof(struct tioce_kernel), GFP_KERNEL);
+ tioce_kern = kzalloc(sizeof(struct tioce_kernel), GFP_KERNEL);
if (!tioce_kern) {
return NULL;
}
tioce_kern->ce_common = tioce_common;
spin_lock_init(&tioce_kern->ce_lock);
INIT_LIST_HEAD(&tioce_kern->ce_dmamap_list);
- tioce_common->ce_kernel_private = (uint64_t) tioce_kern;
+ tioce_common->ce_kernel_private = (u64) tioce_kern;
/*
* Determine the secondary bus number of the port2 logical PPB.
raw_pci_ops->read(tioce_common->ce_pcibus.bs_persist_segment,
tioce_common->ce_pcibus.bs_persist_busnum,
PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1, &tmp);
- tioce_kern->ce_port1_secondary = (uint8_t) tmp;
+ tioce_kern->ce_port1_secondary = (u8) tmp;
/*
* Set PMU pagesize to the largest size available, and zero out
struct pcidev_info *pcidev_info;
struct tioce_common *ce_common;
struct tioce *ce_mmr;
- uint64_t force_int_val;
+ u64 force_int_val;
if (!sn_irq_info->irq_bridge)
return;
struct tioce_common *ce_common;
struct tioce *ce_mmr;
int bit;
- uint64_t vector;
+ u64 vector;
pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
if (!pcidev_info)
bit = sn_irq_info->irq_int_bit;
__sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
- vector = (uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
+ vector = (u64)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
vector |= sn_irq_info->irq_xtalkaddr;
writeq(vector, &ce_mmr->ce_adm_int_dest[bit]);
__sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
* Allocate kernel bus soft and copy from prom.
*/
- tioce_common = kcalloc(1, sizeof(struct tioce_common), GFP_KERNEL);
+ tioce_common = kzalloc(sizeof(struct tioce_common), GFP_KERNEL);
if (!tioce_common)
return NULL;
git.openpandora.org / pandora-kernel.git / blobdiff