* 05/01/30 Suresh Siddha <suresh.b.siddha@intel.com>
* Setup cpu_sibling_map and cpu_core_map
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/acpi.h>
#endif
#ifdef CONFIG_HOTPLUG_CPU
+#ifdef CONFIG_PERMIT_BSP_REMOVE
+#define bsp_remove_ok 1
+#else
+#define bsp_remove_ok 0
+#endif
+
/*
* Store all idle threads, this can be reused instead of creating
* a new thread. Also avoids complicated thread destroy functionality
/*
* ITC synchronization related stuff:
*/
-#define MASTER 0
+#define MASTER (0)
#define SLAVE (SMP_CACHE_BYTES/8)
#define NUM_ROUNDS 64 /* magic value */
extern void start_ap (void);
extern unsigned long ia64_iobase;
-task_t *task_for_booting_cpu;
+struct task_struct *task_for_booting_cpu;
/*
* State for each CPU
unsigned char smp_int_redirect; /* are INT and IPI redirectable by the chipset? */
+#ifdef CONFIG_FORCE_CPEI_RETARGET
+#define CPEI_OVERRIDE_DEFAULT (1)
+#else
+#define CPEI_OVERRIDE_DEFAULT (0)
+#endif
+
+unsigned int force_cpei_retarget = CPEI_OVERRIDE_DEFAULT;
+
+static int __init
+cmdl_force_cpei(char *str)
+{
+ int value=0;
+
+ get_option (&str, &value);
+ force_cpei_retarget = value;
+
+ return 1;
+}
+
+__setup("force_cpei=", cmdl_force_cpei);
+
static int __init
nointroute (char *str)
{
__setup("nointroute", nointroute);
+static void fix_b0_for_bsp(void)
+{
+#ifdef CONFIG_HOTPLUG_CPU
+ int cpuid;
+ static int fix_bsp_b0 = 1;
+
+ cpuid = smp_processor_id();
+
+ /*
+ * Cache the b0 value on the first AP that comes up
+ */
+ if (!(fix_bsp_b0 && cpuid))
+ return;
+
+ sal_boot_rendez_state[0].br[0] = sal_boot_rendez_state[cpuid].br[0];
+ printk ("Fixed BSP b0 value from CPU %d\n", cpuid);
+
+ fix_bsp_b0 = 0;
+#endif
+}
+
void
sync_master (void *arg)
{
static void __devinit
smp_callin (void)
{
- int cpuid, phys_id;
+ int cpuid, phys_id, itc_master;
extern void ia64_init_itm(void);
+ extern volatile int time_keeper_id;
#ifdef CONFIG_PERFMON
extern void pfm_init_percpu(void);
cpuid = smp_processor_id();
phys_id = hard_smp_processor_id();
+ itc_master = time_keeper_id;
if (cpu_online(cpuid)) {
printk(KERN_ERR "huh, phys CPU#0x%x, CPU#0x%x already present??\n",
BUG();
}
+ fix_b0_for_bsp();
+
lock_ipi_calllock();
cpu_set(cpuid, cpu_online_map);
unlock_ipi_calllock();
* calls spin_unlock_bh(), which calls spin_unlock_bh(), which calls
* local_bh_enable(), which bugs out if irqs are not enabled...
*/
- Dprintk("Going to syncup ITC with BP.\n");
- ia64_sync_itc(0);
+ Dprintk("Going to syncup ITC with ITC Master.\n");
+ ia64_sync_itc(itc_master);
}
/*
per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
}
-/*
- * mt_info[] is a temporary store for all info returned by
- * PAL_LOGICAL_TO_PHYSICAL, to be copied into cpuinfo_ia64 when the
- * specific cpu comes.
- */
-static struct {
- __u32 socket_id;
- __u16 core_id;
- __u16 thread_id;
- __u16 proc_fixed_addr;
- __u8 valid;
-} mt_info[NR_CPUS] __devinitdata;
-
#ifdef CONFIG_HOTPLUG_CPU
-static inline void
-remove_from_mtinfo(int cpu)
-{
- int i;
-
- for_each_cpu(i)
- if (mt_info[i].valid && mt_info[i].socket_id ==
- cpu_data(cpu)->socket_id)
- mt_info[i].valid = 0;
-}
-
static inline void
clear_cpu_sibling_map(int cpu)
{
/* remove it from all sibling map's */
clear_cpu_sibling_map(cpu);
+}
+
+extern void fixup_irqs(void);
- /* if this cpu is the last in the core group, remove all its info
- * from mt_info structure
+int migrate_platform_irqs(unsigned int cpu)
+{
+ int new_cpei_cpu;
+ irq_desc_t *desc = NULL;
+ cpumask_t mask;
+ int retval = 0;
+
+ /*
+ * dont permit CPEI target to removed.
*/
- if (last)
- remove_from_mtinfo(cpu);
+ if (cpe_vector > 0 && is_cpu_cpei_target(cpu)) {
+ printk ("CPU (%d) is CPEI Target\n", cpu);
+ if (can_cpei_retarget()) {
+ /*
+ * Now re-target the CPEI to a different processor
+ */
+ new_cpei_cpu = any_online_cpu(cpu_online_map);
+ mask = cpumask_of_cpu(new_cpei_cpu);
+ set_cpei_target_cpu(new_cpei_cpu);
+ desc = irq_desc + ia64_cpe_irq;
+ /*
+ * Switch for now, immediatly, we need to do fake intr
+ * as other interrupts, but need to study CPEI behaviour with
+ * polling before making changes.
+ */
+ if (desc) {
+ desc->chip->disable(ia64_cpe_irq);
+ desc->chip->set_affinity(ia64_cpe_irq, mask);
+ desc->chip->enable(ia64_cpe_irq);
+ printk ("Re-targetting CPEI to cpu %d\n", new_cpei_cpu);
+ }
+ }
+ if (!desc) {
+ printk ("Unable to retarget CPEI, offline cpu [%d] failed\n", cpu);
+ retval = -EBUSY;
+ }
+ }
+ return retval;
}
-extern void fixup_irqs(void);
/* must be called with cpucontrol mutex held */
int __cpu_disable(void)
{
/*
* dont permit boot processor for now
*/
- if (cpu == 0)
- return -EBUSY;
+ if (cpu == 0 && !bsp_remove_ok) {
+ printk ("Your platform does not support removal of BSP\n");
+ return (-EBUSY);
+ }
+
+ cpu_clear(cpu, cpu_online_map);
+
+ if (migrate_platform_irqs(cpu)) {
+ cpu_set(cpu, cpu_online_map);
+ return (-EBUSY);
+ }
remove_siblinginfo(cpu);
cpu_clear(cpu, cpu_online_map);
ia64_sal_strerror(sal_ret));
}
-static inline int __devinit
-check_for_mtinfo_index(void)
-{
- int i;
-
- for_each_cpu(i)
- if (!mt_info[i].valid)
- return i;
-
- return -1;
-}
-
-/*
- * Search the mt_info to find out if this socket's cid/tid information is
- * cached or not. If the socket exists, fill in the core_id and thread_id
- * in cpuinfo
- */
-static int __devinit
-check_for_new_socket(__u16 logical_address, struct cpuinfo_ia64 *c)
-{
- int i;
- __u32 sid = c->socket_id;
-
- for_each_cpu(i) {
- if (mt_info[i].valid && mt_info[i].proc_fixed_addr == logical_address
- && mt_info[i].socket_id == sid) {
- c->core_id = mt_info[i].core_id;
- c->thread_id = mt_info[i].thread_id;
- return 1; /* not a new socket */
- }
- }
- return 0;
-}
-
/*
* identify_siblings(cpu) gets called from identify_cpu. This populates the
* information related to logical execution units in per_cpu_data structure.
{
s64 status;
u16 pltid;
- u64 proc_fixed_addr;
- int count, i;
pal_logical_to_physical_t info;
if (smp_num_cpucores == 1 && smp_num_siblings == 1)
return;
- if ((status = ia64_pal_logical_to_phys(0, &info)) != PAL_STATUS_SUCCESS) {
+ if ((status = ia64_pal_logical_to_phys(-1, &info)) != PAL_STATUS_SUCCESS) {
printk(KERN_ERR "ia64_pal_logical_to_phys failed with %ld\n",
status);
return;
printk(KERN_ERR "ia64_sal_pltid failed with %ld\n", status);
return;
}
- if ((status = ia64_pal_fixed_addr(&proc_fixed_addr)) != PAL_STATUS_SUCCESS) {
- printk(KERN_ERR "ia64_pal_fixed_addr failed with %ld\n", status);
- return;
- }
c->socket_id = (pltid << 8) | info.overview_ppid;
c->cores_per_socket = info.overview_cpp;
c->threads_per_core = info.overview_tpc;
- count = c->num_log = info.overview_num_log;
-
- /* If the thread and core id information is already cached, then
- * we will simply update cpu_info and return. Otherwise, we will
- * do the PAL calls and cache core and thread id's of all the siblings.
- */
- if (check_for_new_socket(proc_fixed_addr, c))
- return;
-
- for (i = 0; i < count; i++) {
- int index;
-
- if (i && (status = ia64_pal_logical_to_phys(i, &info))
- != PAL_STATUS_SUCCESS) {
- printk(KERN_ERR "ia64_pal_logical_to_phys failed"
- " with %ld\n", status);
- return;
- }
- if (info.log2_la == proc_fixed_addr) {
- c->core_id = info.log1_cid;
- c->thread_id = info.log1_tid;
- }
+ c->num_log = info.overview_num_log;
- index = check_for_mtinfo_index();
- /* We will not do the mt_info caching optimization in this case.
- */
- if (index < 0)
- continue;
-
- mt_info[index].valid = 1;
- mt_info[index].socket_id = c->socket_id;
- mt_info[index].core_id = info.log1_cid;
- mt_info[index].thread_id = info.log1_tid;
- mt_info[index].proc_fixed_addr = info.log2_la;
- }
+ c->core_id = info.log1_cid;
+ c->thread_id = info.log1_tid;
}
git.openpandora.org / pandora-kernel.git / blobdiff