* (APM) BIOS Interface Specification, Revision 1.2, February 1996.
*
* [This document is available from Microsoft at:
- * http://www.microsoft.com/hwdev/busbios/amp_12.htm]
+ * http://www.microsoft.com/whdc/archive/amp_12.mspx]
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/poll.h>
#include <linux/smp_lock.h>
#include <linux/dmi.h>
#include <linux/suspend.h>
+#include <linux/kthread.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/desc.h>
#include <asm/i8253.h>
+#include <asm/paravirt.h>
#include "io_ports.h"
#else
static int realmode_power_off;
#endif
-static int exit_kapmd __read_mostly;
-static int kapmd_running __read_mostly;
#ifdef CONFIG_APM_ALLOW_INTS
static int allow_ints = 1;
#else
static const char driver_version[] = "1.16ac"; /* no spaces */
+static struct task_struct *kapmd_task;
+
/*
* APM event names taken from the APM 1.2 specification. These are
* the message codes that the BIOS uses to tell us about events
* Also, we KNOW that for the non error case of apm_bios_call, there
* is no useful data returned in the low order 8 bits of eax.
*/
-#define APM_DO_CLI \
- if (apm_info.allow_ints) \
- local_irq_enable(); \
- else \
+
+static inline unsigned long __apm_irq_save(void)
+{
+ unsigned long flags;
+ local_save_flags(flags);
+ if (apm_info.allow_ints) {
+ if (irqs_disabled_flags(flags))
+ local_irq_enable();
+ } else
local_irq_disable();
+ return flags;
+}
+
+#define apm_irq_save(flags) \
+ do { flags = __apm_irq_save(); } while (0)
+
+static inline void apm_irq_restore(unsigned long flags)
+{
+ if (irqs_disabled_flags(flags))
+ local_irq_disable();
+ else if (irqs_disabled())
+ local_irq_enable();
+}
+
#ifdef APM_ZERO_SEGS
# define APM_DECL_SEGS \
unsigned int saved_fs; unsigned int saved_gs;
save_desc_40 = gdt[0x40 / 8];
gdt[0x40 / 8] = bad_bios_desc;
- local_save_flags(flags);
- APM_DO_CLI;
+ apm_irq_save(flags);
APM_DO_SAVE_SEGS;
apm_bios_call_asm(func, ebx_in, ecx_in, eax, ebx, ecx, edx, esi);
APM_DO_RESTORE_SEGS;
- local_irq_restore(flags);
+ apm_irq_restore(flags);
gdt[0x40 / 8] = save_desc_40;
put_cpu();
apm_restore_cpus(cpus);
save_desc_40 = gdt[0x40 / 8];
gdt[0x40 / 8] = bad_bios_desc;
- local_save_flags(flags);
- APM_DO_CLI;
+ apm_irq_save(flags);
APM_DO_SAVE_SEGS;
error = apm_bios_call_simple_asm(func, ebx_in, ecx_in, eax);
APM_DO_RESTORE_SEGS;
- local_irq_restore(flags);
+ apm_irq_restore(flags);
gdt[0x40 / 8] = save_desc_40;
put_cpu();
apm_restore_cpus(cpus);
static void set_time(void)
{
+ struct timespec ts;
if (got_clock_diff) { /* Must know time zone in order to set clock */
- xtime.tv_sec = get_cmos_time() + clock_cmos_diff;
- xtime.tv_nsec = 0;
+ ts.tv_sec = get_cmos_time() + clock_cmos_diff;
+ ts.tv_nsec = 0;
+ do_settimeofday(&ts);
}
}
restore_processor_state();
local_irq_disable();
- write_seqlock(&xtime_lock);
- spin_lock(&i8253_lock);
- reinit_timer();
set_time();
-
- spin_unlock(&i8253_lock);
- write_sequnlock(&xtime_lock);
+ reinit_timer();
if (err == APM_NO_ERROR)
err = APM_SUCCESS;
ignore_bounce = 1;
if ((event != APM_NORMAL_RESUME)
|| (ignore_normal_resume == 0)) {
- write_seqlock_irq(&xtime_lock);
set_time();
- write_sequnlock_irq(&xtime_lock);
device_resume();
pm_send_all(PM_RESUME, (void *)0);
queue_event(event, NULL);
break;
case APM_UPDATE_TIME:
- write_seqlock_irq(&xtime_lock);
set_time();
- write_sequnlock_irq(&xtime_lock);
break;
case APM_CRITICAL_SUSPEND:
set_current_state(TASK_INTERRUPTIBLE);
for (;;) {
schedule_timeout(APM_CHECK_TIMEOUT);
- if (exit_kapmd)
+ if (kthread_should_stop())
break;
/*
* Ok, check all events, check for idle (and mark us sleeping
char * power_stat;
char * bat_stat;
- kapmd_running = 1;
-
- daemonize("kapmd");
-
- current->flags |= PF_NOFREEZE;
-
#ifdef CONFIG_SMP
/* 2002/08/01 - WT
* This is to avoid random crashes at boot time during initialization
console_blank_hook = NULL;
#endif
}
- kapmd_running = 0;
return 0;
}
{
struct proc_dir_entry *apm_proc;
struct desc_struct *gdt;
- int ret;
+ int err;
dmi_check_system(apm_dmi_table);
- if (apm_info.bios.version == 0) {
+ if (apm_info.bios.version == 0 || paravirt_enabled()) {
printk(KERN_INFO "apm: BIOS not found.\n");
return -ENODEV;
}
if (apm_proc)
apm_proc->owner = THIS_MODULE;
- ret = kernel_thread(apm, NULL, CLONE_KERNEL | SIGCHLD);
- if (ret < 0) {
- printk(KERN_ERR "apm: disabled - Unable to start kernel thread.\n");
- return -ENOMEM;
+ kapmd_task = kthread_create(apm, NULL, "kapmd");
+ if (IS_ERR(kapmd_task)) {
+ printk(KERN_ERR "apm: disabled - Unable to start kernel "
+ "thread.\n");
+ err = PTR_ERR(kapmd_task);
+ kapmd_task = NULL;
+ remove_proc_entry("apm", NULL);
+ return err;
}
+ kapmd_task->flags |= PF_NOFREEZE;
+ wake_up_process(kapmd_task);
if (num_online_cpus() > 1 && !smp ) {
printk(KERN_NOTICE
return 0;
}
- misc_register(&apm_device);
+ /*
+ * Note we don't actually care if the misc_device cannot be registered.
+ * this driver can do its job without it, even if userspace can't
+ * control it. just log the error
+ */
+ if (misc_register(&apm_device))
+ printk(KERN_WARNING "apm: Could not register misc device.\n");
if (HZ != 100)
idle_period = (idle_period * HZ) / 100;
remove_proc_entry("apm", NULL);
if (power_off)
pm_power_off = NULL;
- exit_kapmd = 1;
- while (kapmd_running)
- schedule();
+ if (kapmd_task) {
+ kthread_stop(kapmd_task);
+ kapmd_task = NULL;
+ }
#ifdef CONFIG_PM_LEGACY
pm_active = 0;
#endif
git.openpandora.org / pandora-kernel.git / blobdiff