Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[pandora-kernel.git] / arch / blackfin / mach-common / cpufreq.c
index 7775828..4391d03 100644 (file)
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 #include <linux/fs.h>
+#include <linux/delay.h>
 #include <asm/blackfin.h>
 #include <asm/time.h>
 #include <asm/dpmc.h>
 
+#define CPUFREQ_CPU 0
+
 /* this is the table of CCLK frequencies, in Hz */
 /* .index is the entry in the auxillary dpm_state_table[] */
 static struct cpufreq_frequency_table bfin_freq_table[] = {
@@ -41,64 +44,124 @@ static struct bfin_dpm_state {
        unsigned int tscale; /* change the divider on the core timer interrupt */
 } dpm_state_table[3];
 
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
 /*
  normalized to maximum frequncy offset for CYCLES,
  used in time-ts cycles clock source, but could be used
  somewhere also.
* normalized to maximum frequncy offset for CYCLES,
* used in time-ts cycles clock source, but could be used
* somewhere also.
  */
 unsigned long long __bfin_cycles_off;
 unsigned int __bfin_cycles_mod;
+#endif
 
 /**************************************************************************/
+static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk)
+{
 
-static unsigned int bfin_getfreq_khz(unsigned int cpu)
+       unsigned long csel, min_cclk;
+       int index;
+
+       /* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */
+#if ANOMALY_05000273 || ANOMALY_05000274 || \
+       (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
+       min_cclk = sclk * 2;
+#else
+       min_cclk = sclk;
+#endif
+       csel = ((bfin_read_PLL_DIV() & CSEL) >> 4);
+
+       for (index = 0;  (cclk >> index) >= min_cclk && csel <= 3; index++, csel++) {
+               bfin_freq_table[index].frequency = cclk >> index;
+               dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */
+               dpm_state_table[index].tscale =  (TIME_SCALE / (1 << csel)) - 1;
+
+               pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n",
+                                                bfin_freq_table[index].frequency,
+                                                dpm_state_table[index].csel,
+                                                dpm_state_table[index].tscale);
+       }
+       return;
+}
+
+static void bfin_adjust_core_timer(void *info)
 {
-       /* The driver only support single cpu */
-       if (cpu != 0)
-               return -1;
+       unsigned int tscale;
+       unsigned int index = *(unsigned int *)info;
 
-       return get_cclk() / 1000;
+       /* we have to adjust the core timer, because it is using cclk */
+       tscale = dpm_state_table[index].tscale;
+       bfin_write_TSCALE(tscale);
+       return;
 }
 
+static unsigned int bfin_getfreq_khz(unsigned int cpu)
+{
+       /* Both CoreA/B have the same core clock */
+       return get_cclk() / 1000;
+}
 
-static int bfin_target(struct cpufreq_policy *policy,
+static int bfin_target(struct cpufreq_policy *poli,
                        unsigned int target_freq, unsigned int relation)
 {
-       unsigned int index, plldiv, tscale;
+       unsigned int index, plldiv, cpu;
        unsigned long flags, cclk_hz;
        struct cpufreq_freqs freqs;
+       static unsigned long lpj_ref;
+       static unsigned int  lpj_ref_freq;
+
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
        cycles_t cycles;
+#endif
 
-       if (cpufreq_frequency_table_target(policy, bfin_freq_table,
-                target_freq, relation, &index))
-               return -EINVAL;
-
-       cclk_hz = bfin_freq_table[index].frequency;
-
-       freqs.old = bfin_getfreq_khz(0);
-       freqs.new = cclk_hz;
-       freqs.cpu = 0;
-
-       pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n",
-                cclk_hz, target_freq, freqs.old);
-
-       cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-       local_irq_save_hw(flags);
-               plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel;
-               tscale = dpm_state_table[index].tscale;
-               bfin_write_PLL_DIV(plldiv);
-               /* we have to adjust the core timer, because it is using cclk */
-               bfin_write_TSCALE(tscale);
-               cycles = get_cycles();
-               SSYNC();
-       cycles += 10; /* ~10 cycles we lose after get_cycles() */
-       __bfin_cycles_off += (cycles << __bfin_cycles_mod) - (cycles << index);
-       __bfin_cycles_mod = index;
-       local_irq_restore_hw(flags);
-       /* TODO: just test case for cycles clock source, remove later */
-       pr_debug("cpufreq: done\n");
-       cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+       for_each_online_cpu(cpu) {
+               struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+
+               if (!policy)
+                       continue;
+
+               if (cpufreq_frequency_table_target(policy, bfin_freq_table,
+                                target_freq, relation, &index))
+                       return -EINVAL;
+
+               cclk_hz = bfin_freq_table[index].frequency;
+
+               freqs.old = bfin_getfreq_khz(0);
+               freqs.new = cclk_hz;
+               freqs.cpu = cpu;
+
+               pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n",
+                        cclk_hz, target_freq, freqs.old);
+
+               cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+               if (cpu == CPUFREQ_CPU) {
+                       local_irq_save_hw(flags);
+                       plldiv = (bfin_read_PLL_DIV() & SSEL) |
+                                               dpm_state_table[index].csel;
+                       bfin_write_PLL_DIV(plldiv);
+                       on_each_cpu(bfin_adjust_core_timer, &index, 1);
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
+                       cycles = get_cycles();
+                       SSYNC();
+                       cycles += 10; /* ~10 cycles we lose after get_cycles() */
+                       __bfin_cycles_off +=
+                           (cycles << __bfin_cycles_mod) - (cycles << index);
+                       __bfin_cycles_mod = index;
+#endif
+                       if (!lpj_ref_freq) {
+                               lpj_ref = loops_per_jiffy;
+                               lpj_ref_freq = freqs.old;
+                       }
+                       if (freqs.new != freqs.old) {
+                               loops_per_jiffy = cpufreq_scale(lpj_ref,
+                                               lpj_ref_freq, freqs.new);
+                       }
+                       local_irq_restore_hw(flags);
+               }
+               /* TODO: just test case for cycles clock source, remove later */
+               cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+       }
 
+       pr_debug("cpufreq: done\n");
        return 0;
 }
 
@@ -110,37 +173,16 @@ static int bfin_verify_speed(struct cpufreq_policy *policy)
 static int __init __bfin_cpu_init(struct cpufreq_policy *policy)
 {
 
-       unsigned long cclk, sclk, csel, min_cclk;
-       int index;
-
-       if (policy->cpu != 0)
-               return -EINVAL;
+       unsigned long cclk, sclk;
 
        cclk = get_cclk() / 1000;
        sclk = get_sclk() / 1000;
 
-#if ANOMALY_05000273 || ANOMALY_05000274 || \
-       (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
-       min_cclk = sclk * 2;
-#else
-       min_cclk = sclk;
-#endif
-       csel = ((bfin_read_PLL_DIV() & CSEL) >> 4);
-
-       for (index = 0;  (cclk >> index) >= min_cclk && csel <= 3; index++, csel++) {
-               bfin_freq_table[index].frequency = cclk >> index;
-               dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */
-               dpm_state_table[index].tscale =  (TIME_SCALE / (1 << csel)) - 1;
-
-               pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n",
-                                                bfin_freq_table[index].frequency,
-                                                dpm_state_table[index].csel,
-                                                dpm_state_table[index].tscale);
-       }
+       if (policy->cpu == CPUFREQ_CPU)
+               bfin_init_tables(cclk, sclk);
 
        policy->cpuinfo.transition_latency = 50000; /* 50us assumed */
 
-       /*Now ,only support one cpu */
        policy->cur = cclk;
        cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu);
        return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table);