Pull cpuidle into release branch

[pandora-kernel.git] / arch / blackfin / mach-bf561 / boards / cm_bf561.c

diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 5b2b544..97aeb43 100644 (file)
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -34,13 +34,15 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/usb_isp1362.h>
+#include <linux/pata_platform.h>
 #include <linux/irq.h>
+#include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
  */
-char *bfin_board_name = "Bluetechnix CM BF561";
+const char bfin_board_name[] = "Bluetechnix CM BF561";
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
@@ -112,7 +114,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                /* the modalias must be the same as spi device driver name */
                .modalias = "m25p80", /* Name of spi_driver for this device */
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 1, /* Framework bus number */
+               .bus_num = 0, /* Framework bus number */
                .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
                .platform_data = &bfin_spi_flash_data,
                .controller_data = &spi_flash_chip_info,
@@ -124,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        {
                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 1, /* Framework bus number */
+               .bus_num = 0, /* Framework bus number */
                .chip_select = 1, /* Framework chip select. */
                .platform_data = NULL, /* No spi_driver specific config */
                .controller_data = &spi_adc_chip_info,
@@ -135,7 +137,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        {
                .modalias = "ad1836-spi",
                .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 1,
+               .bus_num = 0,
                .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
                .controller_data = &ad1836_spi_chip_info,
        },
@@ -144,7 +146,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        {
                .modalias = "ad9960-spi",
                .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 1,
+               .bus_num = 0,
                .chip_select = 1,
                .controller_data = &ad9960_spi_chip_info,
        },
@@ -153,7 +155,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        {
                .modalias = "spi_mmc",
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 1,
+               .bus_num = 0,
                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
                .platform_data = NULL,
                .controller_data = &spi_mmc_chip_info,
@@ -162,17 +164,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+       [0] = {
+               .start = SPI0_REGBASE,
+               .end   = SPI0_REGBASE + 0xFF,
+               .flags = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start = CH_SPI,
+               .end   = CH_SPI,
+               .flags = IORESOURCE_IRQ,
+       }
+};
+
 /* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
 };
 
-static struct platform_device spi_bfin_master_device = {
-       .name = "bfin-spi-master",
-       .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+       .name = "bfin-spi",
+       .id = 0, /* Bus number */
+       .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+       .resource = bfin_spi0_resource,
        .dev = {
-               .platform_data = &spi_bfin_master_info, /* Passed to driver */
+               .platform_data = &bfin_spi0_info, /* Passed to driver */
        },
 };
 #endif  /* spi master and devices */
@@ -256,6 +274,43 @@ static struct platform_device bfin_uart_device = {
 };
 #endif
 
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT       119
+
+static struct pata_platform_info bfin_pata_platform_data = {
+       .ioport_shift = 2,
+       .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+       {
+               .start = 0x2400C000,
+               .end = 0x2400C001F,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = 0x2400D018,
+               .end = 0x2400D01B,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = PATA_INT,
+               .end = PATA_INT,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device bfin_pata_device = {
+       .name = "pata_platform",
+       .id = -1,
+       .num_resources = ARRAY_SIZE(bfin_pata_resources),
+       .resource = bfin_pata_resources,
+       .dev = {
+               .platform_data = &bfin_pata_platform_data,
+       }
+};
+#endif
+
 static struct platform_device *cm_bf561_devices[] __initdata = {
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
@@ -271,9 +326,12 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-       &spi_bfin_master_device,
+       &bfin_spi0_device,
 #endif
 
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+       &bfin_pata_device,
+#endif
 };
 
 static int __init cm_bf561_init(void)
@@ -283,6 +341,10 @@ static int __init cm_bf561_init(void)
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+       irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
        return 0;
 }