#define PINT2 0x40000000 /* Pin Interrupt 2 */
#define PINT3 0x80000000 /* Pin Interrupt 3 */
-/* Bit masks for DMAx_CONFIG, MDMA_Sx_CONFIG, MDMA_Dx_CONFIG */
-
-#define DMAEN 0x1 /* DMA Channel Enable */
-#define WNR 0x2 /* DMA Direction */
-#define WDSIZE_8 0x0 /* Transfer Word Size = 8 */
-#define WDSIZE_16 0x4 /* Transfer Word Size = 16 */
-#define WDSIZE_32 0x8 /* Transfer Word Size = 32 */
-#define DMA2D 0x10 /* DMA Mode */
-#define RESTART 0x20 /* Work Unit Transitions */
-#define DI_SEL 0x40 /* Data Interrupt Timing Select */
-#define DI_EN 0x80 /* Data Interrupt Enable */
-
-#define NDSIZE 0xf00 /* Flex Descriptor Size */
-#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
-#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
-#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
-#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
-#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
-#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
-#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
-#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
-#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
-#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
-
-#define DMAFLOW 0xf000 /* Next Operation */
-#define DMAFLOW_STOP 0x0000 /* Stop Mode */
-#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
-#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
-#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
-
-/* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
-
-#define DMA_DONE 0x1 /* DMA Completion Interrupt Status */
-#define DMA_ERR 0x2 /* DMA Error Interrupt Status */
-#define DFETCH 0x4 /* DMA Descriptor Fetch */
-#define DMA_RUN 0x8 /* DMA Channel Running */
-
/* Bit masks for DMAx_PERIPHERAL_MAP, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
#define CTYPE 0x40 /* DMA Channel Type */
#define DEB3_MERROR 0x40 /* DEB3 Error (2nd) */
#define CORE_MERROR 0x80 /* Core Error (2nd) */
-/* Bit masks for EBIU_ERRADD */
-
-#define ERROR_ADDRESS 0xffffffff /* Error Address */
-
/* Bit masks for EBIU_RSTCTL */
#define DDRSRESET 0x1 /* DDR soft reset */
#define SRACK 0x10 /* Self-refresh acknowledge */
#define MDDRENABLE 0x20 /* Mobile DDR enable */
-/* Bit masks for EBIU_DDRBRC0 */
-
-#define BRC0 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC1 */
-
-#define BRC1 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC2 */
-
-#define BRC2 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC3 */
-
-#define BRC3 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC4 */
-
-#define BRC4 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC5 */
-
-#define BRC5 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC6 */
-
-#define BRC6 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC7 */
-
-#define BRC7 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC0 */
-
-#define BWC0 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC1 */
-
-#define BWC1 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC2 */
-
-#define BWC2 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC3 */
-
-#define BWC3 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC4 */
-
-#define BWC4 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC5 */
-
-#define BWC5 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC6 */
-
-#define BWC6 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC7 */
-
-#define BWC7 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRACCT */
-
-#define ACCT 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRTACT */
-
-#define TECT 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRARCT */
-
-#define ARCT 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRGC0 */
-
-#define GC0 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRGC1 */
-
-#define GC1 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRGC2 */
-
-#define GC2 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRGC3 */
-
-#define GC3 0xffffffff /* Count */
-
/* Bit masks for EBIU_DDRMCEN */
#define B0WCENABLE 0x1 /* Bank 0 write count enable */
#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */
#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */
-/* Bit masks for WDOG_CTL */
-
-#define WDEV 0x6 /* Watchdog Event */
-#define WDEN 0xff0 /* Watchdog Enable */
-#define WDRO 0x8000 /* Watchdog Rolled Over */
-
/* Bit masks for CNT_CONFIG */
#define CNTE 0x1 /* Counter Enable */
#define DPRESCALE 0xf /* Load Counter Register */
-/* Bit masks for RTC_STAT */
-
-#define SECONDS 0x3f /* Seconds */
-#define MINUTES 0xfc0 /* Minutes */
-#define HOURS 0x1f000 /* Hours */
-#define DAY_COUNTER 0xfffe0000 /* Day Counter */
-
-/* Bit masks for RTC_ICTL */
-
-#define STOPWATCH_INTERRUPT_ENABLE 0x1 /* Stopwatch Interrupt Enable */
-#define ALARM_INTERRUPT_ENABLE 0x2 /* Alarm Interrupt Enable */
-#define SECONDS_INTERRUPT_ENABLE 0x4 /* Seconds Interrupt Enable */
-#define MINUTES_INTERRUPT_ENABLE 0x8 /* Minutes Interrupt Enable */
-#define HOURS_INTERRUPT_ENABLE 0x10 /* Hours Interrupt Enable */
-#define TWENTY_FOUR_HOURS_INTERRUPT_ENABLE 0x20 /* 24 Hours Interrupt Enable */
-#define DAY_ALARM_INTERRUPT_ENABLE 0x40 /* Day Alarm Interrupt Enable */
-#define WRITE_COMPLETE_INTERRUPT_ENABLE 0x8000 /* Write Complete Interrupt Enable */
-
-/* Bit masks for RTC_ISTAT */
-
-#define STOPWATCH_EVENT_FLAG 0x1 /* Stopwatch Event Flag */
-#define ALARM_EVENT_FLAG 0x2 /* Alarm Event Flag */
-#define SECONDS_EVENT_FLAG 0x4 /* Seconds Event Flag */
-#define MINUTES_EVENT_FLAG 0x8 /* Minutes Event Flag */
-#define HOURS_EVENT_FLAG 0x10 /* Hours Event Flag */
-#define TWENTY_FOUR_HOURS_EVENT_FLAG 0x20 /* 24 Hours Event Flag */
-#define DAY_ALARM_EVENT_FLAG 0x40 /* Day Alarm Event Flag */
-#define WRITE_PENDING__STATUS 0x4000 /* Write Pending Status */
-#define WRITE_COMPLETE 0x8000 /* Write Complete */
-
-/* Bit masks for RTC_SWCNT */
-
-#define STOPWATCH_COUNT 0xffff /* Stopwatch Count */
-
-/* Bit masks for RTC_ALARM */
-
-#define SECONDS 0x3f /* Seconds */
-#define MINUTES 0xfc0 /* Minutes */
-#define HOURS 0x1f000 /* Hours */
-#define DAY 0xfffe0000 /* Day */
-
-/* Bit masks for RTC_PREN */
-
-#define PREN 0x1 /* Prescaler Enable */
-
-/* Bit masks for OTP_CONTROL */
-
-#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */
-#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */
-#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */
-#define FWRTEST 0x2000 /* OTP/Fuse Write Test */
-#define FRDEN 0x4000 /* OTP/Fuse Read Enable */
-#define FWREN 0x8000 /* OTP/Fuse Write Enable */
-
-/* Bit masks for OTP_BEN */
-
-#define FBEN 0xffff /* OTP/Fuse Byte Enable */
-
-/* Bit masks for OTP_STATUS */
-
-#define FCOMP 0x1 /* OTP/Fuse Access Complete */
-#define FERROR 0x2 /* OTP/Fuse Access Error */
-#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */
-#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */
-#define FPGMEN 0x40 /* OTP/Fuse Program Enable */
-
-/* Bit masks for OTP_TIMING */
-
-#define USECDIV 0xff /* Micro Second Divider */
-#define READACC 0x7f00 /* Read Access Time */
-#define CPUMPRL 0x38000 /* Charge Pump Release Time */
-#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */
-#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */
-#define PGMTIME 0xff000000 /* Program Time */
-
/* Bit masks for SECURE_SYSSWT */
#define EMUDABL 0x1 /* Emulation Disable. */
#define AFEXIT 0x10 /* Authentication Firmware Exit */
#define SECSTAT 0xe0 /* Secure Status */
-/* Bit masks for PLL_DIV */
-
-#define CSEL 0x30 /* Core Select */
-#define SSEL 0xf /* System Select */
-#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
-#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
-#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
-#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
-
-/* Bit masks for PLL_CTL */
-
-#define MSEL 0x7e00 /* Multiplier Select */
-#define BYPASS 0x100 /* PLL Bypass Enable */
-#define OUTPUT_DELAY 0x80 /* External Memory Output Delay Enable */
-#define INPUT_DELAY 0x40 /* External Memory Input Delay Enable */
-#define PDWN 0x20 /* Power Down */
-#define STOPCK 0x8 /* Stop Clock */
-#define PLL_OFF 0x2 /* Disable PLL */
-#define DF 0x1 /* Divide Frequency */
-
/* SWRST Masks */
#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
-/* Bit masks for PLL_STAT */
-
-#define PLL_LOCKED 0x20 /* PLL Locked Status */
-#define ACTIVE_PLLDISABLED 0x4 /* Active Mode With PLL Disabled */
-#define FULL_ON 0x2 /* Full-On Mode */
-#define ACTIVE_PLLENABLED 0x1 /* Active Mode With PLL Enabled */
-#define RTCWS 0x400 /* RTC/Reset Wake-Up Status */
-#define CANWS 0x800 /* CAN Wake-Up Status */
-#define USBWS 0x2000 /* USB Wake-Up Status */
-#define KPADWS 0x4000 /* Keypad Wake-Up Status */
-#define ROTWS 0x8000 /* Rotary Wake-Up Status */
-#define GPWS 0x1000 /* General-Purpose Wake-Up Status */
-
-/* Bit masks for VR_CTL */
-
-#define FREQ 0x3 /* Regulator Switching Frequency */
-#define GAIN 0xc /* Voltage Output Level Gain */
-#define VLEV 0xf0 /* Internal Voltage Level */
-#define SCKELOW 0x8000 /* Drive SCKE Low During Reset Enable */
-#define WAKE 0x100 /* RTC/Reset Wake-Up Enable */
-#define CANWE 0x200 /* CAN0/1 Wake-Up Enable */
-#define GPWE 0x400 /* General-Purpose Wake-Up Enable */
-#define USBWE 0x800 /* USB Wake-Up Enable */
-#define KPADWE 0x1000 /* Keypad Wake-Up Enable */
-#define ROTWE 0x2000 /* Rotary Wake-Up Enable */
-
-#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
-#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
-#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
-
-#define GAIN_5 0x0000 /* GAIN = 5*/
-#define GAIN_10 0x0004 /* GAIN = 1*/
-#define GAIN_20 0x0008 /* GAIN = 2*/
-#define GAIN_50 0x000C /* GAIN = 5*/
-
-#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
-#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
-#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
-#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
-#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
-#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
-#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
-#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
-#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
-#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
-
/* Bit masks for NFC_CTL */
#define WR_DLY 0xf /* Write Strobe Delay */
#define UCCT 0x40 /* Universal Counter CAN Trigger */
#define UCE 0x80 /* Universal Counter Enable */
-/* Bit masks for CAN0_UCCNT */
-
-#define UCCNT 0xffff /* Universal Counter Count Value */
-
-/* Bit masks for CAN0_UCRC */
-
-#define UCVAL 0xffff /* Universal Counter Reload/Capture Value */
-
/* Bit masks for CAN0_CEC */
#define RXECNT 0xff /* Receive Error Counter */
git.openpandora.org / pandora-kernel.git / blobdiff