Blackfin: move on-chip UART resources to boards files

[pandora-kernel.git] / arch / blackfin / mach-bf537 / boards / tcm_bf537.c

diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 57163b6..d77ca5b 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -327,25 +327,93 @@ static struct platform_device cm_flash_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
        {
-               .start = 0xFFC00400,
-               .end = 0xFFC004FF,
+               .start = UART0_THR,
+               .end = UART0_GCTL+2,
                .flags = IORESOURCE_MEM,
-       }, {
-               .start = 0xFFC02000,
-               .end = 0xFFC020FF,
+       },
+       {
+               .start = IRQ_UART0_RX,
+               .end = IRQ_UART0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_UART0_ERROR,
+               .end = IRQ_UART0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = CH_UART0_TX,
+               .end = CH_UART0_TX,
+               .flags = IORESOURCE_DMA,
+       },
+       {
+               .start = CH_UART0_RX,
+               .end = CH_UART0_RX,
+               .flags = IORESOURCE_DMA,
+       },
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+       P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+       .name = "bfin-uart",
+       .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_uart0_resources),
+       .resource = bfin_uart0_resources,
+       .dev = {
+               .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+       {
+               .start = UART1_THR,
+               .end = UART1_GCTL+2,
                .flags = IORESOURCE_MEM,
        },
+       {
+               .start = IRQ_UART1_RX,
+               .end = IRQ_UART1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_UART1_ERROR,
+               .end = IRQ_UART1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = CH_UART1_TX,
+               .end = CH_UART1_TX,
+               .flags = IORESOURCE_DMA,
+       },
+       {
+               .start = CH_UART1_RX,
+               .end = CH_UART1_RX,
+               .flags = IORESOURCE_DMA,
+       },
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart1_peripherals[] = {
+       P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
        .name = "bfin-uart",
        .id = 1,
-       .num_resources = ARRAY_SIZE(bfin_uart_resources),
-       .resource = bfin_uart_resources,
+       .num_resources = ARRAY_SIZE(bfin_uart1_resources),
+       .resource = bfin_uart1_resources,
+       .dev = {
+               .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+       },
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -524,7 +592,12 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-       &bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+       &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+       &bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)