#include <linux/cramfs_fs.h>
#include <linux/romfs_fs.h>
+#include <asm/cplb.h>
#include <asm/cacheflush.h>
#include <asm/blackfin.h>
#include <asm/cplbinit.h>
#include <asm/fixed_code.h>
+#include <asm/early_printk.h>
u16 _bfin_swrst;
void __init bf53x_cache_init(void)
{
-#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
+#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
generate_cpl_tables();
#endif
-#ifdef CONFIG_BLKFIN_CACHE
+#ifdef CONFIG_BFIN_ICACHE
bfin_icache_init();
printk(KERN_INFO "Instruction Cache Enabled\n");
#endif
-#ifdef CONFIG_BLKFIN_DCACHE
+#ifdef CONFIG_BFIN_DCACHE
bfin_dcache_init();
printk(KERN_INFO "Data Cache Enabled"
-# if defined CONFIG_BLKFIN_WB
+# if defined CONFIG_BFIN_WB
" (write-back)"
-# elif defined CONFIG_BLKFIN_WT
+# elif defined CONFIG_BFIN_WT
" (write-through)"
# endif
"\n");
1;
}
}
+ } else if (!memcmp(to, "earlyprintk=", 12)) {
+ to += 12;
+ setup_early_printk(to);
}
-
}
c = *(to++);
if (!c)
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
+
+#if defined(CONFIG_CMDLINE_BOOL)
+ strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
+ command_line[sizeof(command_line) - 1] = 0;
+#endif
+
+ /* Keep a copy of command line */
+ *cmdline_p = &command_line[0];
+ memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+ boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
+
+ /* setup memory defaults from the user config */
+ physical_mem_end = 0;
+ _ramend = CONFIG_MEM_SIZE * 1024 * 1024;
+
+ parse_cmdline_early(&command_line[0]);
+
cclk = get_cclk();
sclk = get_sclk();
-#if !defined(CONFIG_BFIN_KERNEL_CLOCK) && defined(ANOMALY_05000273)
- if (cclk == sclk)
+#if !defined(CONFIG_BFIN_KERNEL_CLOCK)
+ if (ANOMALY_05000273 && cclk == sclk)
panic("ANOMALY 05000273, SCLK can not be same as CCLK");
#endif
-#if defined(ANOMALY_05000266)
- bfin_read_IMDMA_D0_IRQ_STATUS();
- bfin_read_IMDMA_D1_IRQ_STATUS();
-#endif
-
-#ifdef DEBUG_SERIAL_EARLY_INIT
- bfin_console_init(); /* early console registration */
- /* this give a chance to get printk() working before crash. */
+#ifdef BF561_FAMILY
+ if (ANOMALY_05000266) {
+ bfin_read_IMDMA_D0_IRQ_STATUS();
+ bfin_read_IMDMA_D1_IRQ_STATUS();
+ }
#endif
printk(KERN_INFO "Hardware Trace ");
flash_probe();
#endif
-#if defined(CONFIG_CMDLINE_BOOL)
- strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
- command_line[sizeof(command_line) - 1] = 0;
-#endif
-
- /* Keep a copy of command line */
- *cmdline_p = &command_line[0];
- memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
-
- /* setup memory defaults from the user config */
- physical_mem_end = 0;
- _ramend = CONFIG_MEM_SIZE * 1024 * 1024;
-
- parse_cmdline_early(&command_line[0]);
-
if (physical_mem_end == 0)
physical_mem_end = _ramend;
&& ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
mtd_size =
PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
-# if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+# if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
_ebss = memory_mtd_start; /* define _ebss for compatible */
#endif /* CONFIG_MTD_UCLINUX */
-#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
CPU, bfin_revid());
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
- printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu Mhz System Clock\n",
+ printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
cclk / 1000000, sclk / 1000000);
-#if defined(ANOMALY_05000273)
- if ((cclk >> 1) <= sclk)
+ if (ANOMALY_05000273 && (cclk >> 1) <= sclk)
printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
-#endif
printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
if (l1_length > L1_DATA_A_LENGTH)
panic("L1 data memory overflow\n");
-#ifdef BF561_FAMILY
- _bfin_swrst = bfin_read_SICA_SWRST();
-#else
_bfin_swrst = bfin_read_SWRST();
-#endif
/* Copy atomic sequences to their fixed location, and sanity check that
these locations are the ones that we advertise to userspace. */
BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
!= ATOMIC_XOR32 - FIXED_CODE_START);
+ init_exception_vectors();
bf53x_cache_init();
}
return vco;
}
-/*Get the Core clock*/
+/* Get the Core clock */
u_long get_cclk(void)
{
u_long csel, ssel;
}
EXPORT_SYMBOL(get_sclk);
+unsigned long sclk_to_usecs(unsigned long sclk)
+{
+ return (USEC_PER_SEC * (u64)sclk) / get_sclk();
+}
+EXPORT_SYMBOL(sclk_to_usecs);
+
+unsigned long usecs_to_sclk(unsigned long usecs)
+{
+ return (get_sclk() * (u64)usecs) / USEC_PER_SEC;
+}
+EXPORT_SYMBOL(usecs_to_sclk);
+
/*
* Get CPU information for use by the procfs.
*/
static int show_cpuinfo(struct seq_file *m, void *v)
{
- char *cpu, *mmu, *fpu, *name;
+ char *cpu, *mmu, *fpu, *vendor, *cache;
uint32_t revid;
u_long cclk = 0, sclk = 0;
mmu = "none";
fpu = "none";
revid = bfin_revid();
- name = bfin_board_name;
cclk = get_cclk();
sclk = get_sclk();
- seq_printf(m, "CPU:\t\tADSP-%s Rev. 0.%d\n"
- "MMU:\t\t%s\n"
- "FPU:\t\t%s\n"
- "Core Clock:\t%9lu Hz\n"
- "System Clock:\t%9lu Hz\n"
- "BogoMips:\t%lu.%02lu\n"
- "Calibration:\t%lu loops\n",
- cpu, revid, mmu, fpu,
- cclk,
- sclk,
- (loops_per_jiffy * HZ) / 500000,
- ((loops_per_jiffy * HZ) / 5000) % 100,
- (loops_per_jiffy * HZ));
- seq_printf(m, "Board Name:\t%s\n", name);
- seq_printf(m, "Board Memory:\t%ld MB\n", physical_mem_end >> 20);
- seq_printf(m, "Kernel Memory:\t%ld MB\n", (unsigned long)_ramend >> 20);
- if (bfin_read_IMEM_CONTROL() & (ENICPLB | IMC))
- seq_printf(m, "I-CACHE:\tON\n");
- else
- seq_printf(m, "I-CACHE:\tOFF\n");
- if ((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE))
- seq_printf(m, "D-CACHE:\tON"
-#if defined CONFIG_BLKFIN_WB
- " (write-back)"
-#elif defined CONFIG_BLKFIN_WT
- " (write-through)"
-#endif
- "\n");
- else
- seq_printf(m, "D-CACHE:\tOFF\n");
-
+ switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) {
+ case 0xca:
+ vendor = "Analog Devices";
+ break;
+ default:
+ vendor = "unknown";
+ break;
+ }
+ seq_printf(m, "processor\t: %d\n"
+ "vendor_id\t: %s\n"
+ "cpu family\t: 0x%x\n"
+ "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK)\n"
+ "stepping\t: %d\n",
+ 0,
+ vendor,
+ (bfin_read_CHIPID() & CHIPID_FAMILY),
+ cpu, cclk/1000000, sclk/1000000,
+ revid);
+
+ seq_printf(m, "cpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
+ cclk/1000000, cclk%1000000,
+ sclk/1000000, sclk%1000000);
+ seq_printf(m, "bogomips\t: %lu.%02lu\n"
+ "Calibration\t: %lu loops\n",
+ (loops_per_jiffy * HZ) / 500000,
+ ((loops_per_jiffy * HZ) / 5000) % 100,
+ (loops_per_jiffy * HZ));
+
+ /* Check Cache configutation */
switch (bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) {
case ACACHE_BSRAM:
- seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tSRAM\n");
+ cache = "dbank-A/B\t: cache/sram";
dcache_size = 16;
dsup_banks = 1;
break;
case ACACHE_BCACHE:
- seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tCACHE\n");
+ cache = "dbank-A/B\t: cache/cache";
dcache_size = 32;
dsup_banks = 2;
break;
case ASRAM_BSRAM:
- seq_printf(m, "DBANK-A:\tSRAM\n" "DBANK-B:\tSRAM\n");
+ cache = "dbank-A/B\t: sram/sram";
dcache_size = 0;
dsup_banks = 0;
break;
default:
+ cache = "unknown";
+ dcache_size = 0;
+ dsup_banks = 0;
break;
}
+ /* Is it turned on? */
+ if (!((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE)))
+ dcache_size = 0;
+
+ seq_printf(m, "cache size\t: %d KB(L1 icache) "
+ "%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
+ BFIN_ICACHESIZE / 1024, dcache_size,
+#if defined CONFIG_BFIN_WB
+ "wb"
+#elif defined CONFIG_BFIN_WT
+ "wt"
+#endif
+ "", 0);
+
+ seq_printf(m, "%s\n", cache);
- seq_printf(m, "I-CACHE Size:\t%dKB\n", BLKFIN_ICACHESIZE / 1024);
- seq_printf(m, "D-CACHE Size:\t%dKB\n", dcache_size);
- seq_printf(m, "I-CACHE Setup:\t%d Sub-banks/%d Ways, %d Lines/Way\n",
- BLKFIN_ISUBBANKS, BLKFIN_IWAYS, BLKFIN_ILINES);
+ seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
+ BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
seq_printf(m,
- "D-CACHE Setup:\t%d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
- dsup_banks, BLKFIN_DSUBBANKS, BLKFIN_DWAYS,
- BLKFIN_DLINES);
-#ifdef CONFIG_BLKFIN_CACHE_LOCK
+ "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
+ dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
+ BFIN_DLINES);
+#ifdef CONFIG_BFIN_ICACHE_LOCK
switch (read_iloc()) {
case WAY0_L:
seq_printf(m, "Way0 Locked-Down\n");
seq_printf(m, "No Ways are locked\n");
}
#endif
+
+ seq_printf(m, "board name\t: %s\n", bfin_board_name);
+ seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
+ physical_mem_end >> 10, (void *)0, (void *)physical_mem_end);
+ seq_printf(m, "kernel memory\t: %d kB (0x%p -> 0x%p)\n",
+ ((int)memory_end - (int)_stext) >> 10,
+ _stext,
+ (void *)memory_end);
+
return 0;
}
git.openpandora.org / pandora-kernel.git / blobdiff