*/
#include <linux/clk.h>
#include <linux/etherdevice.h>
+#include <linux/i2c-gpio.h>
#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/platform_device.h>
#include <linux/types.h>
+#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <asm/io.h>
#include <asm/setup.h>
-#include <asm/arch/at32ap7000.h>
+#include <asm/arch/at32ap700x.h>
#include <asm/arch/board.h>
#include <asm/arch/init.h>
+#include <asm/arch/portmux.h>
/* Initialized by bootloader-specific startup code. */
struct tag *bootloader_tags __initdata;
at32_setup_serial_console(0);
}
+static const struct gpio_led ngw_leds[] = {
+ { .name = "sys", .gpio = GPIO_PIN_PA(16), .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { .name = "a", .gpio = GPIO_PIN_PA(19), .active_low = 1, },
+ { .name = "b", .gpio = GPIO_PIN_PE(19), .active_low = 1, },
+};
+
+static const struct gpio_led_platform_data ngw_led_data = {
+ .num_leds = ARRAY_SIZE(ngw_leds),
+ .leds = (void *) ngw_leds,
+};
+
+static struct platform_device ngw_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = (void *) &ngw_led_data,
+ }
+};
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+ .sda_pin = GPIO_PIN_PA(6),
+ .scl_pin = GPIO_PIN_PA(7),
+ .sda_is_open_drain = 1,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* close to 100 kHz */
+};
+
+static struct platform_device i2c_gpio_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &i2c_gpio_data,
+ },
+};
+
static int __init atngw100_init(void)
{
+ unsigned i;
+
/*
* ATNGW100 uses 16-bit SDRAM interface, so we don't need to
* reserve any pins for it.
set_hw_addr(at32_add_device_eth(1, ð_data[1]));
at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+ at32_add_device_usba(0, NULL);
+
+ for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
+ at32_select_gpio(ngw_leds[i].gpio,
+ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ }
+ platform_device_register(&ngw_gpio_leds);
+
+ at32_select_gpio(i2c_gpio_data.sda_pin,
+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ at32_select_gpio(i2c_gpio_data.scl_pin,
+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ platform_device_register(&i2c_gpio_device);
return 0;
}