Merge branch 'imx-for-arnd' of git://git.pengutronix.de/git/imx/linux-2.6 into fixes

[pandora-kernel.git] / arch / arm / plat-samsung / include / plat / gpio-cfg.h

diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 1762dcb..df8155b 100644 (file)
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -24,14 +24,16 @@
 #ifndef __PLAT_GPIO_CFG_H
 #define __PLAT_GPIO_CFG_H __FILE__
 
-typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+#include<linux/types.h>
+
+typedef unsigned int __bitwise__ samsung_gpio_pull_t;
 typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
 
 /* forward declaration if gpio-core.h hasn't been included */
-struct s3c_gpio_chip;
+struct samsung_gpio_chip;
 
 /**
- * struct s3c_gpio_cfg GPIO configuration
+ * struct samsung_gpio_cfg GPIO configuration
  * @cfg_eint: Configuration setting when used for external interrupt source
  * @get_pull: Read the current pull configuration for the GPIO
  * @set_pull: Set the current pull configuraiton for the GPIO
@@ -44,20 +46,20 @@ struct s3c_gpio_chip;
  * per-bank configuration information that other systems such as the
  * external interrupt code will need.
  *
- * @sa s3c_gpio_cfgpin
+ * @sa samsung_gpio_cfgpin
  * @sa s3c_gpio_getcfg
  * @sa s3c_gpio_setpull
  * @sa s3c_gpio_getpull
  */
-struct s3c_gpio_cfg {
+struct samsung_gpio_cfg {
        unsigned int    cfg_eint;
 
-       s3c_gpio_pull_t (*get_pull)(struct s3c_gpio_chip *chip, unsigned offs);
-       int             (*set_pull)(struct s3c_gpio_chip *chip, unsigned offs,
-                                   s3c_gpio_pull_t pull);
+       samsung_gpio_pull_t     (*get_pull)(struct samsung_gpio_chip *chip, unsigned offs);
+       int             (*set_pull)(struct samsung_gpio_chip *chip, unsigned offs,
+                                   samsung_gpio_pull_t pull);
 
-       unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs);
-       int      (*set_config)(struct s3c_gpio_chip *chip, unsigned offs,
+       unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs);
+       int      (*set_config)(struct samsung_gpio_chip *chip, unsigned offs,
                               unsigned config);
 };
 
@@ -69,7 +71,7 @@ struct s3c_gpio_cfg {
 #define S3C_GPIO_OUTPUT        (S3C_GPIO_SPECIAL(1))
 #define S3C_GPIO_SFN(x)        (S3C_GPIO_SPECIAL(x))
 
-#define s3c_gpio_is_cfg_special(_cfg) \
+#define samsung_gpio_is_cfg_special(_cfg) \
        (((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
 
 /**
@@ -128,9 +130,9 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
  * up or down settings, and it may be dependent on the chip that is being
  * used to whether the particular mode is available.
  */
-#define S3C_GPIO_PULL_NONE     ((__force s3c_gpio_pull_t)0x00)
-#define S3C_GPIO_PULL_DOWN     ((__force s3c_gpio_pull_t)0x01)
-#define S3C_GPIO_PULL_UP       ((__force s3c_gpio_pull_t)0x02)
+#define S3C_GPIO_PULL_NONE     ((__force samsung_gpio_pull_t)0x00)
+#define S3C_GPIO_PULL_DOWN     ((__force samsung_gpio_pull_t)0x01)
+#define S3C_GPIO_PULL_UP       ((__force samsung_gpio_pull_t)0x02)
 
 /**
  * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
@@ -143,7 +145,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
  *
  * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
 */
-extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
+extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
 
 /**
  * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
@@ -151,7 +153,7 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
  *
  * Read the pull resistor value for the specified pin.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
 
 /* configure `all` aspects of an gpio */
 
@@ -170,7 +172,7 @@ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
  * @sa s3c_gpio_cfgpin_range
  */
 extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
-                                unsigned int cfg, s3c_gpio_pull_t pull);
+                                unsigned int cfg, samsung_gpio_pull_t pull);
 
 static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
                                           unsigned int cfg)