Merge branch 'l2x0-pull-rmk' of git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4...

[pandora-kernel.git] / arch / arm / plat-omap / sram.c

diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 10b3b4c..e2c8eeb 100644 (file)
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/omapfb.h>
 
 #include <asm/tlb.h>
 #include <asm/cacheflush.h>
@@ -30,8 +31,8 @@
 #include <plat/cpu.h>
 #include <plat/vram.h>
 
-#include <plat/control.h>
-
+#include "sram.h"
+#include "fb.h"
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/prm.h"
 # include "../mach-omap2/cm.h"
@@ -53,7 +54,7 @@
 #define OMAP4_SRAM_PUB_PA      (OMAP4_SRAM_PA + 0x4000)
 #define OMAP4_SRAM_PUB_VA      (OMAP4_SRAM_VA + 0x4000)
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2PLUS)
 #define SRAM_BOOTLOADER_SZ     0x00
 #else
 #define SRAM_BOOTLOADER_SZ     0x80
@@ -68,7 +69,6 @@
 #define OMAP34XX_VA_WRITEPERM0         OMAP2_L3_IO_ADDRESS(0x68012858)
 #define OMAP34XX_VA_ADDR_MATCH2                OMAP2_L3_IO_ADDRESS(0x68012880)
 #define OMAP34XX_VA_SMS_RG_ATT0                OMAP2_L3_IO_ADDRESS(0x6C000048)
-#define OMAP34XX_VA_CONTROL_STAT       OMAP2_L4_IO_ADDRESS(0x480022F0)
 
 #define GP_DEVICE              0x300
 
@@ -79,12 +79,6 @@ static unsigned long omap_sram_base;
 static unsigned long omap_sram_size;
 static unsigned long omap_sram_ceil;
 
-extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
-                                        unsigned long sram_vstart,
-                                        unsigned long sram_size,
-                                        unsigned long pstart_avail,
-                                        unsigned long size_avail);
-
 /*
  * Depending on the target RAMFS firewall setup, the public usable amount of
  * SRAM varies.  The default accessible size for all device types is 2k. A GP
@@ -93,16 +87,7 @@ extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
  */
 static int is_sram_locked(void)
 {
-       int type = 0;
-
-       if (cpu_is_omap44xx())
-               /* Not yet supported */
-               return 0;
-
-       if (cpu_is_omap242x())
-               type = omap_rev() & OMAP2_DEVICETYPE_MASK;
-
-       if (type == GP_DEVICE) {
+       if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
                /* RAMFW: R/W access to all initiators for all qualifier sets */
                if (cpu_is_omap242x()) {
                        __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
@@ -127,7 +112,7 @@ static int is_sram_locked(void)
  * to secure SRAM will hang the system. Also the SRAM is not
  * yet mapped at this point.
  */
-void __init omap_detect_sram(void)
+static void __init omap_detect_sram(void)
 {
        unsigned long reserved;
 
@@ -213,7 +198,7 @@ static struct map_desc omap_sram_io_desc[] __initdata = {
 /*
  * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
  */
-void __init omap_map_sram(void)
+static void __init omap_map_sram(void)
 {
        unsigned long base;
 
@@ -330,7 +315,7 @@ u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP2420
-int __init omap242x_sram_init(void)
+static int __init omap242x_sram_init(void)
 {
        _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
                                        omap242x_sram_ddr_init_sz);
@@ -351,7 +336,7 @@ static inline int omap242x_sram_init(void)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP2430
-int __init omap243x_sram_init(void)
+static int __init omap243x_sram_init(void)
 {
        _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
                                        omap243x_sram_ddr_init_sz);
@@ -407,7 +392,7 @@ void omap3_sram_restore_context(void)
 }
 #endif /* CONFIG_PM */
 
-int __init omap34xx_sram_init(void)
+static int __init omap34xx_sram_init(void)
 {
        _omap3_sram_configure_core_dpll =
                omap_sram_push(omap3_sram_configure_core_dpll,
@@ -423,7 +408,7 @@ static inline int omap34xx_sram_init(void)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
-int __init omap44xx_sram_init(void)
+static int __init omap44xx_sram_init(void)
 {
        printk(KERN_ERR "FIXME: %s not implemented\n", __func__);