#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <asm/system.h>
-#include <asm/irq.h>
#include <asm/hardware.h>
#include <asm/dma.h>
#include <asm/io.h>
#define OMAP_DMA_ACTIVE 0x01
#define OMAP_DMA_CCR_EN (1 << 7)
+#define OMAP2_DMA_CSR_CLEAR_MASK 0xffe
#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
omap_writew(0, lch_base + i);
}
-void omap_set_dma_priority(int dst_port, int priority)
+void omap_set_dma_priority(int lch, int dst_port, int priority)
{
unsigned long reg;
u32 l;
- switch (dst_port) {
- case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */
- reg = OMAP_TC_OCPT1_PRIOR;
- break;
- case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */
- reg = OMAP_TC_OCPT2_PRIOR;
- break;
- case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */
- reg = OMAP_TC_EMIFF_PRIOR;
- break;
- case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */
- reg = OMAP_TC_EMIFS_PRIOR;
- break;
- default:
- BUG();
- return;
+ if (cpu_class_is_omap1()) {
+ switch (dst_port) {
+ case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */
+ reg = OMAP_TC_OCPT1_PRIOR;
+ break;
+ case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */
+ reg = OMAP_TC_OCPT2_PRIOR;
+ break;
+ case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */
+ reg = OMAP_TC_EMIFF_PRIOR;
+ break;
+ case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */
+ reg = OMAP_TC_EMIFS_PRIOR;
+ break;
+ default:
+ BUG();
+ return;
+ }
+ l = omap_readl(reg);
+ l &= ~(0xf << 8);
+ l |= (priority & 0xf) << 8;
+ omap_writel(l, reg);
+ }
+
+ if (cpu_is_omap24xx()) {
+ if (priority)
+ OMAP_DMA_CCR_REG(lch) |= (1 << 6);
+ else
+ OMAP_DMA_CCR_REG(lch) &= ~(1 << 6);
}
- l = omap_readl(reg);
- l &= ~(0xf << 8);
- l |= (priority & 0xf) << 8;
- omap_writel(l, reg);
}
void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
if (cpu_is_omap24xx() && dma_trigger) {
u32 val = OMAP_DMA_CCR_REG(lch);
+ val &= ~(3 << 19);
if (dma_trigger > 63)
val |= 1 << 20;
if (dma_trigger > 31)
val |= 1 << 19;
+ val &= ~(0x1f);
val |= (dma_trigger & 0x1f);
if (sync_mode & OMAP_DMA_SYNC_FRAME)
val |= 1 << 5;
+ else
+ val &= ~(1 << 5);
if (sync_mode & OMAP_DMA_SYNC_BLOCK)
val |= 1 << 18;
+ else
+ val &= ~(1 << 18);
if (src_or_dst_synch)
val |= 1 << 24; /* source synch */
OMAP1_DMA_LCH_CTRL_REG(lch) = w;
}
+void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
+{
+ if (cpu_is_omap24xx()) {
+ OMAP_DMA_CSDP_REG(lch) &= ~(0x3 << 16);
+ OMAP_DMA_CSDP_REG(lch) |= (mode << 16);
+ }
+}
+
/* Note that src_port is only for omap1 */
void omap_set_dma_src_params(int lch, int src_port, int src_amode,
unsigned long src_start,
void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
+ unsigned int burst = 0;
OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- OMAP_DMA_CSDP_REG(lch) |= (0x02 << 7);
+ if (cpu_is_omap24xx())
+ burst = 0x1;
+ else
+ burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- /* not supported by current hardware
+ if (cpu_is_omap24xx()) {
+ burst = 0x2;
+ break;
+ }
+ /* not supported by current hardware on OMAP1
* w |= (0x03 << 7);
* fall through
*/
+ case OMAP_DMA_DATA_BURST_16:
+ if (cpu_is_omap24xx()) {
+ burst = 0x3;
+ break;
+ }
+ /* OMAP1 don't support burst 16
+ * fall through
+ */
default:
BUG();
}
+ OMAP_DMA_CSDP_REG(lch) |= (burst << 7);
}
/* Note that dest_port is only for OMAP1 */
void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
+ unsigned int burst = 0;
OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- OMAP_DMA_CSDP_REG(lch) |= (0x02 << 14);
+ if (cpu_is_omap24xx())
+ burst = 0x1;
+ else
+ burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- OMAP_DMA_CSDP_REG(lch) |= (0x03 << 14);
+ if (cpu_is_omap24xx())
+ burst = 0x2;
+ else
+ burst = 0x3;
break;
+ case OMAP_DMA_DATA_BURST_16:
+ if (cpu_is_omap24xx()) {
+ burst = 0x3;
+ break;
+ }
+ /* OMAP1 don't support burst 16
+ * fall through
+ */
default:
printk(KERN_ERR "Invalid DMA burst mode\n");
BUG();
return;
}
+ OMAP_DMA_CSDP_REG(lch) |= (burst << 14);
}
static inline void omap_enable_channel_irq(int lch)
{
u32 status;
- /* Read CSR to make sure it's cleared. */
- status = OMAP_DMA_CSR_REG(lch);
+ /* Clear CSR */
+ if (cpu_class_is_omap1())
+ status = OMAP_DMA_CSR_REG(lch);
+ else if (cpu_is_omap24xx())
+ OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
/* Enable some nice interrupts. */
OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
chan->dev_name = dev_name;
chan->callback = callback;
chan->data = data;
- chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ |
- OMAP_DMA_BLOCK_IRQ;
+ chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
- if (cpu_is_omap24xx())
- chan->enabled_irqs |= OMAP2_DMA_TRANS_ERR_IRQ;
+ if (cpu_class_is_omap1())
+ chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
+ else if (cpu_is_omap24xx())
+ chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
+ OMAP2_DMA_TRANS_ERR_IRQ;
if (cpu_is_omap16xx()) {
/* If the sync device is set, configure it dynamically. */
omap_enable_channel_irq(free_ch);
/* Clear the CSR register and IRQ status register */
- OMAP_DMA_CSR_REG(free_ch) = 0x0;
+ OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK;
omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0);
}
omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
/* Clear the CSR register and IRQ status register */
- OMAP_DMA_CSR_REG(lch) = 0x0;
+ OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
val |= 1 << lch;
dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}
+/*
+ * Allows changing the DMA callback function or data. This may be needed if
+ * the driver shares a single DMA channel for multiple dma triggers.
+ */
+int omap_set_dma_callback(int lch,
+ void (* callback)(int lch, u16 ch_status, void *data),
+ void *data)
+{
+ unsigned long flags;
+
+ if (lch < 0)
+ return -ENODEV;
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ if (dma_chan[lch].dev_id == -1) {
+ printk(KERN_ERR "DMA callback for not set for free channel\n");
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+ return -EINVAL;
+ }
+ dma_chan[lch].callback = callback;
+ dma_chan[lch].data = data;
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+
+ return 0;
+}
+
/*
* Returns current physical source address for the given DMA channel.
* If the channel is running the caller must disable interrupts prior calling
"%d (CSR %04x)\n", ch, csr);
return 0;
}
- if (unlikely(csr & OMAP_DMA_TOUT_IRQ))
+ if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
printk(KERN_WARNING "DMA timeout with device %d\n",
dma_chan[ch].dev_id);
if (unlikely(csr & OMAP_DMA_DROP_IRQ))
return 1;
}
-static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id,
- struct pt_regs *regs)
+static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
{
int ch = ((int) dev_id) - 1;
int handled = 0;
return 0;
if (unlikely(dma_chan[ch].dev_id == -1))
return 0;
- /* REVISIT: According to 24xx TRM, there's no TOUT_IE */
- if (unlikely(status & OMAP_DMA_TOUT_IRQ))
- printk(KERN_INFO "DMA timeout with device %d\n",
- dma_chan[ch].dev_id);
if (unlikely(status & OMAP_DMA_DROP_IRQ))
printk(KERN_INFO
"DMA synchronization event drop occurred with device "
"%d\n", dma_chan[ch].dev_id);
-
if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ))
printk(KERN_INFO "DMA transaction error with device %d\n",
dma_chan[ch].dev_id);
+ if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
+ printk(KERN_INFO "DMA secure error with device %d\n",
+ dma_chan[ch].dev_id);
+ if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
+ printk(KERN_INFO "DMA misaligned error with device %d\n",
+ dma_chan[ch].dev_id);
- OMAP_DMA_CSR_REG(ch) = 0x20;
+ OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK;
val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
/* ch in this function is from 0-31 while in register it is 1-32 */
}
/* STATUS register count is from 1-32 while our is 0-31 */
-static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id,
- struct pt_regs *regs)
+static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
{
u32 val;
int i;
static struct irqaction omap24xx_dma_irq = {
.name = "DMA",
.handler = omap2_dma_irq_handler,
- .flags = SA_INTERRUPT
+ .flags = IRQF_DISABLED
};
#else
omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
}
-static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id,
- struct pt_regs *regs)
+static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
{
u16 w;
dma_chan_count = 16;
} else
dma_chan_count = 9;
+ if (cpu_is_omap16xx()) {
+ u16 w;
+
+ /* this would prevent OMAP sleep */
+ w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+ w &= ~(1 << 8);
+ omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+ }
} else if (cpu_is_omap24xx()) {
u8 revision = omap_readb(OMAP_DMA4_REVISION);
printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
EXPORT_SYMBOL(omap_free_dma);
EXPORT_SYMBOL(omap_start_dma);
EXPORT_SYMBOL(omap_stop_dma);
+EXPORT_SYMBOL(omap_set_dma_callback);
EXPORT_SYMBOL(omap_enable_dma_irq);
EXPORT_SYMBOL(omap_disable_dma_irq);
EXPORT_SYMBOL(omap_set_dma_transfer_params);
EXPORT_SYMBOL(omap_set_dma_color_mode);
+EXPORT_SYMBOL(omap_set_dma_write_mode);
EXPORT_SYMBOL(omap_set_dma_src_params);
EXPORT_SYMBOL(omap_set_dma_src_index);
git.openpandora.org / pandora-kernel.git / blobdiff