Merge branch 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git...

[pandora-kernel.git] / arch / arm / mach-ux500 / board-mop500.c

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 6e1907f..2a08c07 100644 (file)
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -27,18 +27,21 @@
 #include <linux/leds-lp5521.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/delay.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <plat/i2c.h>
 #include <plat/ste_dma40.h>
+#include <plat/pincfg.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/irqs.h>
 
+#include "pins-db8500.h"
 #include "ste-dma40-db8500.h"
 #include "devices-db8500.h"
 #include "board-mop500.h"
@@ -204,7 +207,7 @@ static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
        },
 };
 
-#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
+#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm)   \
 static struct nmk_i2c_controller u8500_i2c##id##_data = { \
        /*                              \
         * slave data setup time, which is      \
@@ -219,19 +222,21 @@ static struct nmk_i2c_controller u8500_i2c##id##_data = { \
        .rft            = _rft,         \
        /* std. mode operation */       \
        .clk_freq       = clk,          \
+       /* Slave response timeout(ms) */\
+       .timeout        = t_out,        \
        .sm             = _sm,          \
 }
 
 /*
  * The board uses 4 i2c controllers, initialize all of
  * them with slave data setup time of 250 ns,
- * Tx & Rx FIFO threshold values as 1 and standard
+ * Tx & Rx FIFO threshold values as 8 and standard
  * mode of operation
  */
-U8500_I2C_CONTROLLER(0, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-U8500_I2C_CONTROLLER(2,        0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-U8500_I2C_CONTROLLER(3,        0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(2,        0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(3,        0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 
 static void __init mop500_i2c_init(void)
 {
@@ -391,12 +396,63 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
 };
 #endif
 
+
+static pin_cfg_t mop500_pins_uart0[] = {
+       GPIO0_U0_CTSn   | PIN_INPUT_PULLUP,
+       GPIO1_U0_RTSn   | PIN_OUTPUT_HIGH,
+       GPIO2_U0_RXD    | PIN_INPUT_PULLUP,
+       GPIO3_U0_TXD    | PIN_OUTPUT_HIGH,
+};
+
+#define PRCC_K_SOFTRST_SET      0x18
+#define PRCC_K_SOFTRST_CLEAR    0x1C
+static void ux500_uart0_reset(void)
+{
+       void __iomem *prcc_rst_set, *prcc_rst_clr;
+
+       prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
+                       PRCC_K_SOFTRST_SET);
+       prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
+                       PRCC_K_SOFTRST_CLEAR);
+
+       /* Activate soft reset PRCC_K_SOFTRST_CLEAR */
+       writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
+       udelay(1);
+
+       /* Release soft reset PRCC_K_SOFTRST_SET */
+       writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
+       udelay(1);
+}
+
+static void ux500_uart0_init(void)
+{
+       int ret;
+
+       ret = nmk_config_pins(mop500_pins_uart0,
+                       ARRAY_SIZE(mop500_pins_uart0));
+       if (ret < 0)
+               pr_err("pl011: uart pins_enable failed\n");
+}
+
+static void ux500_uart0_exit(void)
+{
+       int ret;
+
+       ret = nmk_config_pins_sleep(mop500_pins_uart0,
+                       ARRAY_SIZE(mop500_pins_uart0));
+       if (ret < 0)
+               pr_err("pl011: uart pins_disable failed\n");
+}
+
 static struct amba_pl011_data uart0_plat = {
 #ifdef CONFIG_STE_DMA40
        .dma_filter = stedma40_filter,
        .dma_rx_param = &uart0_dma_cfg_rx,
        .dma_tx_param = &uart0_dma_cfg_tx,
 #endif
+       .init = ux500_uart0_init,
+       .exit = ux500_uart0_exit,
+       .reset = ux500_uart0_reset,
 };
 
 static struct amba_pl011_data uart1_plat = {