#include <linux/init.h>
#include <linux/kernel.h>
-#include <mach/misc_regs.h>
#include <plat/clock.h>
+#include <mach/misc_regs.h>
/* root clks */
/* 32 KHz oscillator clock */
};
/* clock derived from 30 MHz osc clk */
+/* pll masks structure */
+static struct pll_clk_masks pll1_masks = {
+ .mode_mask = PLL_MODE_MASK,
+ .mode_shift = PLL_MODE_SHIFT,
+ .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
+ .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
+ .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
+ .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
+ .div_p_mask = PLL_DIV_P_MASK,
+ .div_p_shift = PLL_DIV_P_SHIFT,
+ .div_n_mask = PLL_DIV_N_MASK,
+ .div_n_shift = PLL_DIV_N_SHIFT,
+};
+
/* pll1 configuration structure */
static struct pll_clk_config pll1_config = {
.mode_reg = PLL1_CTR,
.cfg_reg = PLL1_FRQ,
+ .masks = &pll1_masks,
+};
+
+/* pll rate configuration table, in ascending order of rates */
+struct pll_rate_tbl pll_rtbl[] = {
+ {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
};
/* PLL1 clock */
static struct clk pll1_clk = {
+ .flags = ENABLED_ON_INIT,
.pclk = &osc_30m_clk,
.en_reg = PLL1_CTR,
.en_reg_bit = PLL_ENABLE,
- .recalc = &pll1_clk_recalc,
+ .calc_rate = &pll_calc_rate,
+ .recalc = &pll_clk_recalc,
+ .set_rate = &pll_clk_set_rate,
+ .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
.private_data = &pll1_config,
};
.recalc = &follow_parent,
};
+/* ahb masks structure */
+static struct bus_clk_masks ahb_masks = {
+ .mask = PLL_HCLK_RATIO_MASK,
+ .shift = PLL_HCLK_RATIO_SHIFT,
+};
+
/* ahb configuration structure */
static struct bus_clk_config ahb_config = {
.reg = CORE_CLK_CFG,
- .mask = PLL_HCLK_RATIO_MASK,
- .shift = PLL_HCLK_RATIO_SHIFT,
+ .masks = &ahb_masks,
+};
+
+/* ahb rate configuration table, in ascending order of rates */
+struct bus_rate_tbl bus_rtbl[] = {
+ {.div = 3}, /* == parent divided by 4 */
+ {.div = 2}, /* == parent divided by 3 */
+ {.div = 1}, /* == parent divided by 2 */
+ {.div = 0}, /* == parent divided by 1 */
};
/* ahb clock */
static struct clk ahb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
+ .calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
+ .set_rate = &bus_clk_set_rate,
+ .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &ahb_config,
};
+/* auxiliary synthesizers masks */
+static struct aux_clk_masks aux_masks = {
+ .eq_sel_mask = AUX_EQ_SEL_MASK,
+ .eq_sel_shift = AUX_EQ_SEL_SHIFT,
+ .eq1_mask = AUX_EQ1_SEL,
+ .eq2_mask = AUX_EQ2_SEL,
+ .xscale_sel_mask = AUX_XSCALE_MASK,
+ .xscale_sel_shift = AUX_XSCALE_SHIFT,
+ .yscale_sel_mask = AUX_YSCALE_MASK,
+ .yscale_sel_shift = AUX_YSCALE_SHIFT,
+};
+
+/* uart configurations */
+static struct aux_clk_config uart_synth_config = {
+ .synth_reg = UART_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* aux rate configuration table, in ascending order of rates */
+struct aux_rate_tbl aux_rtbl[] = {
+ /* For PLL1 = 332 MHz */
+ {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
+ {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+/* uart synth clock */
+static struct clk uart_synth_clk = {
+ .en_reg = UART_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
+ .private_data = &uart_synth_config,
+};
+
/* uart parents */
static struct pclk_info uart_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &uart_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
.pclk_sel_mask = UART_CLK_MASK,
};
-/* uart configurations */
-static struct aux_clk_config uart_config = {
- .synth_reg = UART_CLK_SYNT,
-};
-
/* uart0 clock */
static struct clk uart0_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = UART0_CLK_ENB,
.pclk_sel = &uart_pclk_sel,
.pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &uart_config,
+ .recalc = &follow_parent,
};
/* uart1 clock */
.en_reg_bit = UART1_CLK_ENB,
.pclk_sel = &uart_pclk_sel,
.pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &uart_config,
+ .recalc = &follow_parent,
};
/* firda configurations */
-static struct aux_clk_config firda_config = {
+static struct aux_clk_config firda_synth_config = {
.synth_reg = FIRDA_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* firda synth clock */
+static struct clk firda_synth_clk = {
+ .en_reg = FIRDA_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
+ .private_data = &firda_synth_config,
};
/* firda parents */
static struct pclk_info firda_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &firda_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
.en_reg_bit = FIRDA_CLK_ENB,
.pclk_sel = &firda_pclk_sel,
.pclk_sel_shift = FIRDA_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &firda_config,
+ .recalc = &follow_parent,
};
/* clcd configurations */
-static struct aux_clk_config clcd_config = {
+static struct aux_clk_config clcd_synth_config = {
.synth_reg = CLCD_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* firda synth clock */
+static struct clk clcd_synth_clk = {
+ .en_reg = CLCD_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
+ .private_data = &clcd_synth_config,
};
/* clcd parents */
static struct pclk_info clcd_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &clcd_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
.en_reg_bit = CLCD_CLK_ENB,
.pclk_sel = &clcd_pclk_sel,
.pclk_sel_shift = CLCD_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &clcd_config,
+ .recalc = &follow_parent,
+};
+
+/* gpt synthesizer masks */
+static struct gpt_clk_masks gpt_masks = {
+ .mscale_sel_mask = GPT_MSCALE_MASK,
+ .mscale_sel_shift = GPT_MSCALE_SHIFT,
+ .nscale_sel_mask = GPT_NSCALE_MASK,
+ .nscale_sel_shift = GPT_NSCALE_SHIFT,
+};
+
+/* gpt rate configuration table, in ascending order of rates */
+struct gpt_rate_tbl gpt_rtbl[] = {
+ /* For pll1 = 332 MHz */
+ {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+ {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+ {.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+/* gpt0 synth clk config*/
+static struct gpt_clk_config gpt0_synth_config = {
+ .synth_reg = PRSC1_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt0_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt0_synth_config,
};
/* gpt parents */
-static struct pclk_info gpt_pclk_info[] = {
+static struct pclk_info gpt0_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &gpt0_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
-static struct pclk_sel gpt_pclk_sel = {
- .pclk_info = gpt_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt_pclk_info),
+static struct pclk_sel gpt0_pclk_sel = {
+ .pclk_info = gpt0_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
-/* gpt0_1 configurations */
-static struct aux_clk_config gpt0_1_config = {
- .synth_reg = PRSC1_CLK_CFG,
-};
-
/* gpt0 ARM1 subsystem timer clock */
static struct clk gpt0_clk = {
.flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt0_pclk_sel,
.pclk_sel_shift = GPT0_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt0_1_config,
+ .recalc = &follow_parent,
+};
+
+
+/* Note: gpt0 and gpt1 share same parent clocks */
+/* gpt parent select structure */
+static struct pclk_sel gpt1_pclk_sel = {
+ .pclk_info = gpt0_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt1 timer clock */
static struct clk gpt1_clk = {
.flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt1_pclk_sel,
.pclk_sel_shift = GPT1_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt0_1_config,
+ .recalc = &follow_parent,
};
-/* gpt2 configurations */
-static struct aux_clk_config gpt2_config = {
+/* gpt2 synth clk config*/
+static struct gpt_clk_config gpt2_synth_config = {
.synth_reg = PRSC2_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt2_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt2_synth_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt2_pclk_info[] = {
+ {
+ .pclk = &gpt2_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_val = AUX_CLK_PLL3_VAL,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt2_pclk_sel = {
+ .pclk_info = gpt2_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt2 timer clock */
static struct clk gpt2_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPT2_CLK_ENB,
- .pclk_sel = &gpt_pclk_sel,
+ .flags = ALWAYS_ENABLED,
+ .pclk_sel = &gpt2_pclk_sel,
.pclk_sel_shift = GPT2_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt2_config,
+ .recalc = &follow_parent,
};
-/* gpt3 configurations */
-static struct aux_clk_config gpt3_config = {
+/* gpt3 synth clk config*/
+static struct gpt_clk_config gpt3_synth_config = {
.synth_reg = PRSC3_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt3_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt3_synth_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt3_pclk_info[] = {
+ {
+ .pclk = &gpt3_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_val = AUX_CLK_PLL3_VAL,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt3_pclk_sel = {
+ .pclk_info = gpt3_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt3_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt3 timer clock */
static struct clk gpt3_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPT3_CLK_ENB,
- .pclk_sel = &gpt_pclk_sel,
+ .flags = ALWAYS_ENABLED,
+ .pclk_sel = &gpt3_pclk_sel,
.pclk_sel_shift = GPT3_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt3_config,
+ .recalc = &follow_parent,
};
/* clock derived from pll3 clk */
};
/* clock derived from ahb clk */
+/* apb masks structure */
+static struct bus_clk_masks apb_masks = {
+ .mask = HCLK_PCLK_RATIO_MASK,
+ .shift = HCLK_PCLK_RATIO_SHIFT,
+};
+
/* apb configuration structure */
static struct bus_clk_config apb_config = {
.reg = CORE_CLK_CFG,
- .mask = HCLK_PCLK_RATIO_MASK,
- .shift = HCLK_PCLK_RATIO_SHIFT,
+ .masks = &apb_masks,
};
/* apb clock */
static struct clk apb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
+ .calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
+ .set_rate = &bus_clk_set_rate,
+ .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &apb_config,
};
/* array of all spear 6xx clock lookups */
static struct clk_lookup spear_clk_lookups[] = {
- { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
+ { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
/* root clks */
{ .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
{ .con_id = "osc_30m_clk", .clk = &osc_30m_clk},
/* clock derived from 32 KHz os clk */
- { .dev_id = "rtc", .clk = &rtc_clk},
+ { .dev_id = "rtc-spear", .clk = &rtc_clk},
/* clock derived from 30 MHz os clk */
{ .con_id = "pll1_clk", .clk = &pll1_clk},
{ .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk},
/* clock derived from pll1 clk */
{ .con_id = "cpu_clk", .clk = &cpu_clk},
{ .con_id = "ahb_clk", .clk = &ahb_clk},
+ { .con_id = "uart_synth_clk", .clk = &uart_synth_clk},
+ { .con_id = "firda_synth_clk", .clk = &firda_synth_clk},
+ { .con_id = "clcd_synth_clk", .clk = &clcd_synth_clk},
+ { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
+ { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
+ { .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk},
{ .dev_id = "uart0", .clk = &uart0_clk},
{ .dev_id = "uart1", .clk = &uart1_clk},
{ .dev_id = "firda", .clk = &firda_clk},
{ .dev_id = "gpt2", .clk = &gpt2_clk},
{ .dev_id = "gpt3", .clk = &gpt3_clk},
/* clock derived from pll3 clk */
- { .dev_id = "usbh0", .clk = &usbh0_clk},
- { .dev_id = "usbh1", .clk = &usbh1_clk},
- { .dev_id = "usbd", .clk = &usbd_clk},
+ { .dev_id = "designware_udc", .clk = &usbd_clk},
+ { .con_id = "usbh.0_clk", .clk = &usbh0_clk},
+ { .con_id = "usbh.1_clk", .clk = &usbh1_clk},
/* clock derived from ahb clk */
{ .con_id = "apb_clk", .clk = &apb_clk},
- { .dev_id = "i2c", .clk = &i2c_clk},
+ { .dev_id = "i2c_designware.0", .clk = &i2c_clk},
{ .dev_id = "dma", .clk = &dma_clk},
{ .dev_id = "jpeg", .clk = &jpeg_clk},
{ .dev_id = "gmac", .clk = &gmac_clk},
{ .dev_id = "smi", .clk = &smi_clk},
- { .dev_id = "fsmc", .clk = &fsmc_clk},
+ { .con_id = "fsmc", .clk = &fsmc_clk},
/* clock derived from apb clk */
{ .dev_id = "adc", .clk = &adc_clk},
- { .dev_id = "ssp0", .clk = &ssp0_clk},
- { .dev_id = "ssp1", .clk = &ssp1_clk},
- { .dev_id = "ssp2", .clk = &ssp2_clk},
+ { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
+ { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
+ { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
{ .dev_id = "gpio0", .clk = &gpio0_clk},
{ .dev_id = "gpio1", .clk = &gpio1_clk},
{ .dev_id = "gpio2", .clk = &gpio2_clk},
git.openpandora.org / pandora-kernel.git / blobdiff