*/
#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/memory.h>
#include <asm/assembler.h>
-#define SMFRAM 0xe6a70000
-
- .align
-kernel_flush:
- .word v7_flush_dcache_all
-
- .align 3
-ENTRY(sh7372_cpu_suspend)
- stmfd sp!, {r0-r12, lr} @ save registers on stack
-
- ldr r8, =SMFRAM
-
- mov r4, sp @ Store sp
- mrs r5, spsr @ Store spsr
- mov r6, lr @ Store lr
- stmia r8!, {r4-r6}
-
- mrc p15, 0, r4, c1, c0, 2 @ Coprocessor access control register
- mrc p15, 0, r5, c2, c0, 0 @ TTBR0
- mrc p15, 0, r6, c2, c0, 1 @ TTBR1
- mrc p15, 0, r7, c2, c0, 2 @ TTBCR
- stmia r8!, {r4-r7}
-
- mrc p15, 0, r4, c3, c0, 0 @ Domain access Control Register
- mrc p15, 0, r5, c10, c2, 0 @ PRRR
- mrc p15, 0, r6, c10, c2, 1 @ NMRR
- stmia r8!,{r4-r6}
-
- mrc p15, 0, r4, c13, c0, 1 @ Context ID
- mrc p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID
- mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address
- mrs r7, cpsr @ Store current cpsr
- stmia r8!, {r4-r7}
-
- mrc p15, 0, r4, c1, c0, 0 @ save control register
- stmia r8!, {r4}
-
- /*
- * jump out to kernel flush routine
- * - reuse that code is better
- * - it executes in a cached space so is faster than refetch per-block
- * - should be faster and will change with kernel
- * - 'might' have to copy address, load and jump to it
- * Flush all data from the L1 data cache before disabling
- * SCTLR.C bit.
- */
- ldr r1, kernel_flush
- mov lr, pc
- bx r1
+#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
+ .align 12
+ .text
+ .global sh7372_resume_core_standby_a3sm
+sh7372_resume_core_standby_a3sm:
+ ldr pc, 1f
+1: .long cpu_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET
+ .global sh7372_do_idle_a3sm
+sh7372_do_idle_a3sm:
/*
* Clear the SCTLR.C bit to prevent further data cache
* allocation. Clearing SCTLR.C would make all the data accesses
mcr p15, 0, r0, c1, c0, 0
isb
+ /* disable L2 cache in the aux control register */
+ mrc p15, 0, r10, c1, c0, 1
+ bic r10, r10, #2
+ mcr p15, 0, r10, c1, c0, 1
+
/*
- * Invalidate L1 data cache. Even though only invalidate is
- * necessary exported flush API is used here. Doing clean
- * on already clean cache would be almost NOP.
+ * Invalidate data cache again.
*/
ldr r1, kernel_flush
blx r1
dsb
dmb
-/*
- * ===================================
- * == WFI instruction => Enter idle ==
- * ===================================
- */
- wfi @ wait for interrupt
-
-/*
- * ===================================
- * == Resume path for non-OFF modes ==
- * ===================================
- */
- mrc p15, 0, r0, c1, c0, 0
- tst r0, #(1 << 2) @ Check C bit enabled?
- orreq r0, r0, #(1 << 2) @ Enable the C bit if cleared
- mcreq p15, 0, r0, c1, c0, 0
- isb
-
-/*
- * ===================================
- * == Exit point from non-OFF modes ==
- * ===================================
- */
- ldmfd sp!, {r0-r12, pc} @ restore regs and return
+#define SPDCR 0xe6180008
+#define A3SM (1 << 12)
- .pool
+ /* A3SM power down */
+ ldr r0, =SPDCR
+ ldr r1, =A3SM
+ str r1, [r0]
+1:
+ b 1b
- .align 12
- .text
- .global sh7372_cpu_resume
-sh7372_cpu_resume:
-
- mov r1, #0
- /*
- * Invalidate all instruction caches to PoU
- * and flush branch target cache
- */
- mcr p15, 0, r1, c7, c5, 0
-
- ldr r3, =SMFRAM
-
- ldmia r3!, {r4-r6}
- mov sp, r4 @ Restore sp
- msr spsr_cxsf, r5 @ Restore spsr
- mov lr, r6 @ Restore lr
-
- ldmia r3!, {r4-r7}
- mcr p15, 0, r4, c1, c0, 2 @ Coprocessor access Control Register
- mcr p15, 0, r5, c2, c0, 0 @ TTBR0
- mcr p15, 0, r6, c2, c0, 1 @ TTBR1
- mcr p15, 0, r7, c2, c0, 2 @ TTBCR
-
- ldmia r3!,{r4-r6}
- mcr p15, 0, r4, c3, c0, 0 @ Domain access Control Register
- mcr p15, 0, r5, c10, c2, 0 @ PRRR
- mcr p15, 0, r6, c10, c2, 1 @ NMRR
-
- ldmia r3!,{r4-r7}
- mcr p15, 0, r4, c13, c0, 1 @ Context ID
- mcr p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID
- mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address
- msr cpsr, r7 @ store cpsr
-
- /* Starting to enable MMU here */
- mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl
- /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */
- and r7, #0x7
- cmp r7, #0x0
- beq usettbr0
-ttbr_error:
- /*
- * More work needs to be done to support N[0:2] value other than 0
- * So looping here so that the error can be detected
- */
- b ttbr_error
-
- .align
-cache_pred_disable_mask:
- .word 0xFFFFE7FB
-ttbrbit_mask:
- .word 0xFFFFC000
-table_index_mask:
- .word 0xFFF00000
-table_entry:
- .word 0x00000C02
-usettbr0:
-
- mrc p15, 0, r2, c2, c0, 0
- ldr r5, ttbrbit_mask
- and r2, r5
- mov r4, pc
- ldr r5, table_index_mask
- and r4, r5 @ r4 = 31 to 20 bits of pc
- /* Extract the value to be written to table entry */
- ldr r6, table_entry
- /* r6 has the value to be written to table entry */
- add r6, r6, r4
- /* Getting the address of table entry to modify */
- lsr r4, #18
- /* r2 has the location which needs to be modified */
- add r2, r4
- ldr r4, [r2]
- str r6, [r2] /* modify the table entry */
-
- mov r7, r6
- mov r5, r2
- mov r6, r4
- /* r5 = original page table address */
- /* r6 = original page table data */
-
- mov r0, #0
- mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
- mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
- mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
- mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
-
- /*
- * Restore control register. This enables the MMU.
- * The caches and prediction are not enabled here, they
- * will be enabled after restoring the MMU table entry.
- */
- ldmia r3!, {r4}
- stmia r3!, {r5} /* save original page table address */
- stmia r3!, {r6} /* save original page table data */
- stmia r3!, {r7} /* save modified page table data */
-
- ldr r2, cache_pred_disable_mask
- and r4, r2
- mcr p15, 0, r4, c1, c0, 0
- dsb
- isb
-
- ldr r0, =restoremmu_on
- bx r0
-
-/*
- * ==============================
- * == Exit point from OFF mode ==
- * ==============================
- */
-restoremmu_on:
-
- ldmfd sp!, {r0-r12, pc} @ restore regs and return
+kernel_flush:
+ .word v7_flush_dcache_all
+#endif
git.openpandora.org / pandora-kernel.git / blobdiff