#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/fb.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/mfd/max8998.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/regs-clock.h>
#include <mach/regs-fb.h>
+#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
+#include <plat/fimc-core.h>
+#include <plat/sdhci.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+#define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
-#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
+#define AQUILA_ULCON_DEFAULT S3C2410_LCON_CS8
-#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
+#define AQUILA_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE
-static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = AQUILA_UCON_DEFAULT,
+ .ulcon = AQUILA_ULCON_DEFAULT,
+ /*
+ * Actually UART0 can support 256 bytes fifo, but aquila board
+ * supports 128 bytes fifo because of initial chip bug
+ */
+ .ufcon = AQUILA_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = AQUILA_UCON_DEFAULT,
+ .ulcon = AQUILA_ULCON_DEFAULT,
+ .ufcon = AQUILA_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = AQUILA_UCON_DEFAULT,
+ .ulcon = AQUILA_ULCON_DEFAULT,
+ .ufcon = AQUILA_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
},
[3] = {
.hwport = 3,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = AQUILA_UCON_DEFAULT,
+ .ulcon = AQUILA_ULCON_DEFAULT,
+ .ufcon = AQUILA_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
},
};
/* Frame Buffer */
static struct s3c_fb_pd_win aquila_fb_win0 = {
.win_mode = {
- .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
.left_margin = 16,
.right_margin = 16,
.upper_margin = 3,
static struct s3c_fb_pd_win aquila_fb_win1 = {
.win_mode = {
- .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
.left_margin = 16,
.right_margin = 16,
.upper_margin = 3,
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
+/* MAX8998 regulators */
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+
+static struct regulator_init_data aquila_ldo2_data = {
+ .constraints = {
+ .name = "VALIVE_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data aquila_ldo3_data = {
+ .constraints = {
+ .name = "VUSB/MIPI_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo4_data = {
+ .constraints = {
+ .name = "VDAC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo5_data = {
+ .constraints = {
+ .name = "VTF_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo6_data = {
+ .constraints = {
+ .name = "VCC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo7_data = {
+ .constraints = {
+ .name = "VCC_3.0V",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .apply_uV = 1,
+ .boot_on = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo8_data = {
+ .constraints = {
+ .name = "VUSB/VADC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo9_data = {
+ .constraints = {
+ .name = "VCC/VCAM_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo10_data = {
+ .constraints = {
+ .name = "VPLL_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .boot_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo11_data = {
+ .constraints = {
+ .name = "CAM_IO_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo12_data = {
+ .constraints = {
+ .name = "CAM_ISP_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo13_data = {
+ .constraints = {
+ .name = "CAM_A_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo14_data = {
+ .constraints = {
+ .name = "CAM_CIF_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo15_data = {
+ .constraints = {
+ .name = "CAM_AF_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo16_data = {
+ .constraints = {
+ .name = "VMIPI_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data aquila_ldo17_data = {
+ .constraints = {
+ .name = "CAM_8M_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+/* BUCK */
+static struct regulator_consumer_supply buck1_consumer[] = {
+ { .supply = "vddarm", },
+};
+
+static struct regulator_consumer_supply buck2_consumer[] = {
+ { .supply = "vddint", },
+};
+
+static struct regulator_init_data aquila_buck1_data = {
+ .constraints = {
+ .name = "VARM_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
+ .consumer_supplies = buck1_consumer,
+};
+
+static struct regulator_init_data aquila_buck2_data = {
+ .constraints = {
+ .name = "VINT_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
+ .consumer_supplies = buck2_consumer,
+};
+
+static struct regulator_init_data aquila_buck3_data = {
+ .constraints = {
+ .name = "VCC_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data aquila_buck4_data = {
+ .constraints = {
+ .name = "CAM_CORE_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct max8998_regulator_data aquila_regulators[] = {
+ { MAX8998_LDO2, &aquila_ldo2_data },
+ { MAX8998_LDO3, &aquila_ldo3_data },
+ { MAX8998_LDO4, &aquila_ldo4_data },
+ { MAX8998_LDO5, &aquila_ldo5_data },
+ { MAX8998_LDO6, &aquila_ldo6_data },
+ { MAX8998_LDO7, &aquila_ldo7_data },
+ { MAX8998_LDO8, &aquila_ldo8_data },
+ { MAX8998_LDO9, &aquila_ldo9_data },
+ { MAX8998_LDO10, &aquila_ldo10_data },
+ { MAX8998_LDO11, &aquila_ldo11_data },
+ { MAX8998_LDO12, &aquila_ldo12_data },
+ { MAX8998_LDO13, &aquila_ldo13_data },
+ { MAX8998_LDO14, &aquila_ldo14_data },
+ { MAX8998_LDO15, &aquila_ldo15_data },
+ { MAX8998_LDO16, &aquila_ldo16_data },
+ { MAX8998_LDO17, &aquila_ldo17_data },
+ { MAX8998_BUCK1, &aquila_buck1_data },
+ { MAX8998_BUCK2, &aquila_buck2_data },
+ { MAX8998_BUCK3, &aquila_buck3_data },
+ { MAX8998_BUCK4, &aquila_buck4_data },
+};
+
+static struct max8998_platform_data aquila_max8998_pdata = {
+ .num_regulators = ARRAY_SIZE(aquila_regulators),
+ .regulators = aquila_regulators,
+};
+#endif
+
+/* GPIO I2C PMIC */
+#define AP_I2C_GPIO_PMIC_BUS_4 4
+static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
+ .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */
+ .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */
+};
+
+static struct platform_device aquila_i2c_gpio_pmic = {
+ .name = "i2c-gpio",
+ .id = AP_I2C_GPIO_PMIC_BUS_4,
+ .dev = {
+ .platform_data = &aquila_i2c_gpio_pmic_data,
+ },
+};
+
+static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+ {
+ /* 0xCC when SRAD = 0 */
+ I2C_BOARD_INFO("max8998", 0xCC >> 1),
+ .platform_data = &aquila_max8998_pdata,
+ },
+#endif
+};
+
+/* PMIC Power button */
+static struct gpio_keys_button aquila_gpio_keys_table[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = S5PV210_GPH2(6),
+ .desc = "gpio-keys: KEY_POWER",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ },
+};
+
+static struct gpio_keys_platform_data aquila_gpio_keys_data = {
+ .buttons = aquila_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(aquila_gpio_keys_table),
+};
+
+static struct platform_device aquila_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &aquila_gpio_keys_data,
+ },
+};
+
+static void __init aquila_pmic_init(void)
+{
+ /* AP_PMIC_IRQ: EINT7 */
+ s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
+
+ /* nPower: EINT22 */
+ s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
+}
+
+/* MoviNAND */
+static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
+};
+
+/* Wireless LAN */
+static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_EXTERNAL,
+ /* ext_cd_{init,cleanup} callbacks will be added later */
+};
+
+/* External Flash */
+#define AQUILA_EXT_FLASH_EN S5PV210_MP05(4)
+#define AQUILA_EXT_FLASH_CD S5PV210_GPH3(4)
+static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = AQUILA_EXT_FLASH_CD,
+ .ext_cd_gpio_invert = 1,
+};
+
+static void aquila_setup_sdhci(void)
+{
+ gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN");
+ gpio_direction_output(AQUILA_EXT_FLASH_EN, 1);
+
+ s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
+ s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
+ s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
+};
+
static struct platform_device *aquila_devices[] __initdata = {
+ &aquila_i2c_gpio_pmic,
+ &aquila_device_gpiokeys,
&s3c_device_fb,
+ &s5pc110_device_onenand,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
};
static void __init aquila_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+ s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
}
static void __init aquila_machine_init(void)
{
+ /* PMIC */
+ aquila_pmic_init();
+ i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
+ ARRAY_SIZE(i2c_gpio_pmic_devs));
+ /* SDHCI */
+ aquila_setup_sdhci();
+
+ s3c_fimc_setname(0, "s5p-fimc");
+ s3c_fimc_setname(1, "s5p-fimc");
+ s3c_fimc_setname(2, "s5p-fimc");
+
/* FB */
s3c_fb_set_platdata(&aquila_lcd_pdata);
git.openpandora.org / pandora-kernel.git / blobdiff