Merge branch 'depends/rmk/memory_h' into next/cleanup2

[pandora-kernel.git] / arch / arm / mach-s3c64xx / mach-crag6410.c

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 4c76e08..d04b654 100644 (file)
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -43,13 +43,14 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <mach/s3c6410.h>
 #include <mach/regs-sys.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
+#include <mach/crag6410.h>
 
 #include <mach/regs-gpio-memport.h>
 
+#include <plat/s3c6410.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/fb.h>
@@ -65,17 +66,6 @@
 #include <plat/iic.h>
 #include <plat/pm.h>
 
-#include <sound/wm8996.h>
-#include <sound/wm8962.h>
-#include <sound/wm9081.h>
-
-#define BANFF_PMIC_IRQ_BASE            IRQ_BOARD_START
-#define GLENFARCLAS_PMIC_IRQ_BASE      (IRQ_BOARD_START + 64)
-
-#define PCA935X_GPIO_BASE              GPIO_BOARD_START
-#define CODEC_GPIO_BASE                (GPIO_BOARD_START + 8)
-#define GLENFARCLAS_PMIC_GPIO_BASE     (GPIO_BOARD_START + 16)
-
 /* serial port setup */
 
 #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
@@ -287,6 +277,11 @@ static struct platform_device speyside_device = {
        .id             = -1,
 };
 
+static struct platform_device lowland_device = {
+       .name           = "lowland",
+       .id             = -1,
+};
+
 static struct platform_device speyside_wm8962_device = {
        .name           = "speyside-wm8962",
        .id             = -1,
@@ -295,6 +290,8 @@ static struct platform_device speyside_wm8962_device = {
 static struct regulator_consumer_supply wallvdd_consumers[] = {
        REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
        REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+       REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
+       REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
 };
 
 static struct regulator_init_data wallvdd_data = {
@@ -329,9 +326,6 @@ static struct platform_device *crag6410_devices[] __initdata = {
        &s3c_device_fb,
        &s3c_device_ohci,
        &s3c_device_usb_hsotg,
-       &s3c_device_adc,
-       &s3c_device_rtc,
-       &s3c_device_ts,
        &s3c_device_timer[0],
        &s3c64xx_device_iis0,
        &s3c64xx_device_iis1,
@@ -345,6 +339,7 @@ static struct platform_device *crag6410_devices[] __initdata = {
        &crag6410_backlight_device,
        &speyside_device,
        &speyside_wm8962_device,
+       &lowland_device,
        &wallvdd_device,
 };
 
@@ -353,6 +348,12 @@ static struct pca953x_platform_data crag6410_pca_data = {
        .irq_base       = 0,
 };
 
+/* VDDARM is controlled by DVS1 connected to GPK(0) */
+static struct wm831x_buckv_pdata vddarm_pdata = {
+       .dvs_control_src = 1,
+       .dvs_gpio = S3C64XX_GPK(0),
+};
+
 static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
        REGULATOR_SUPPLY("vddarm", NULL),
 };
@@ -368,6 +369,7 @@ static struct regulator_init_data vddarm __initdata = {
        .num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
        .consumer_supplies = vddarm_consumers,
        .supply_regulator = "WALLVDD",
+       .driver_data = &vddarm_pdata,
 };
 
 static struct regulator_init_data vddint __initdata = {
@@ -503,6 +505,8 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = {
        .backup = &banff_backup_pdata,
 
        .gpio_defaults = {
+               /* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */
+               [4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8,
                /* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
                [10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
                /* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
@@ -560,8 +564,12 @@ static struct regulator_init_data pvdd_1v2 __initdata = {
 };
 
 static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+       REGULATOR_SUPPLY("LDOVDD", "1-001a"),
        REGULATOR_SUPPLY("PLLVDD", "1-001a"),
        REGULATOR_SUPPLY("DBVDD", "1-001a"),
+       REGULATOR_SUPPLY("DBVDD1", "1-001a"),
+       REGULATOR_SUPPLY("DBVDD2", "1-001a"),
+       REGULATOR_SUPPLY("DBVDD3", "1-001a"),
        REGULATOR_SUPPLY("CPVDD", "1-001a"),
        REGULATOR_SUPPLY("AVDD2", "1-001a"),
        REGULATOR_SUPPLY("DCVDD", "1-001a"),
@@ -614,81 +622,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
        .disable_touch = true,
 };
 
-static struct wm8996_retune_mobile_config wm8996_retune[] = {
-       {
-               .name = "Sub LPF",
-               .rate = 48000,
-               .regs = {
-                       0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
-                       0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
-                       0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
-               },
-       },
-       {
-               .name = "Sub HPF",
-               .rate = 48000,
-               .regs = {
-                       0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
-                       0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
-                       0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
-               },
-       },
-};
-
-static struct wm8996_pdata wm8996_pdata __initdata = {
-       .ldo_ena = S3C64XX_GPN(7),
-       .gpio_base = CODEC_GPIO_BASE,
-       .micdet_def = 1,
-       .inl_mode = WM8996_DIFFERRENTIAL_1,
-       .inr_mode = WM8996_DIFFERRENTIAL_1,
-
-       .irq_flags = IRQF_TRIGGER_RISING,
-
-       .gpio_default = {
-               0x8001, /* GPIO1 == ADCLRCLK1 */
-               0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
-               0x0141, /* GPIO3 == HP_SEL */
-               0x0002, /* GPIO4 == IRQ */
-               0x020e, /* GPIO5 == CLKOUT */
-       },
-
-       .retune_mobile_cfgs = wm8996_retune,
-       .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
-};
-
-static struct wm8962_pdata wm8962_pdata __initdata = {
-       .gpio_init = {
-               0,
-               WM8962_GPIO_FN_OPCLK,
-               WM8962_GPIO_FN_DMICCLK,
-               0,
-               0x8000 | WM8962_GPIO_FN_DMICDAT,
-               WM8962_GPIO_FN_IRQ,    /* Open drain mode */
-       },
-       .irq_active_low = true,
-};
-
-static struct wm9081_pdata wm9081_pdata __initdata = {
-       .irq_high = false,
-       .irq_cmos = false,
-};
-
 static struct i2c_board_info i2c_devs1[] __initdata = {
        { I2C_BOARD_INFO("wm8311", 0x34),
          .irq = S3C_EINT(0),
          .platform_data = &glenfarclas_pmic_pdata },
 
+       { I2C_BOARD_INFO("wlf-gf-module", 0x24) },
+       { I2C_BOARD_INFO("wlf-gf-module", 0x25) },
+       { I2C_BOARD_INFO("wlf-gf-module", 0x26) },
+
        { I2C_BOARD_INFO("wm1250-ev1", 0x27) },
-       { I2C_BOARD_INFO("wm8996", 0x1a),
-         .platform_data = &wm8996_pdata,
-         .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-       },
-       { I2C_BOARD_INFO("wm9081", 0x6c),
-         .platform_data = &wm9081_pdata, },
-       { I2C_BOARD_INFO("wm8962", 0x1a),
-         .platform_data = &wm8962_pdata,
-         .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-       },
 };
 
 static void __init crag6410_map_io(void)