#undef DEBUG
#include <linux/module.h>
-#include <linux/timer.h>
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/apm_bios.h>
-#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
#include <asm/hardware.h>
-#include <asm/hardware/scoop.h>
#include <asm/mach-types.h>
-#include <asm/irq.h>
#include <asm/apm.h>
-
#include <asm/arch/pm.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/sharpsl.h>
#include "sharpsl.h"
-/*
- * Constants
- */
-#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */
-#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */
-#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */
-#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */
-#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */
-#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD 10 /* 10 msec */
-#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */
-#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */
-#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */
-
-#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
-#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */
-#define SHARPSL_CHARGE_ON_JKVAD_HIGH 0x9b /* 6V */
-#define SHARPSL_CHARGE_ON_JKVAD_LOW 0x34 /* 2V */
-#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */
-#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */
-
struct battery_thresh spitz_battery_levels_acin[] = {
{ 213, 100},
{ 212, 98},
#define MAXCTRL_SEL_SH 4
#define MAXCTRL_STR 1u << 7
-/* MAX1111 Channel Definitions */
-#define BATT_AD 4u
-#define BATT_THM 2u
-#define JK_VAD 6u
-
-
-/*
- * Prototypes
- */
-static int sharpsl_read_MainBattery(void);
-static int sharpsl_off_charge_battery(void);
-static int sharpsl_check_battery(int mode);
-static int sharpsl_ac_check(void);
-static int sharpsl_fatal_check(void);
-static int sharpsl_average_value(int ad);
-static void sharpsl_average_clear(void);
-static void sharpsl_charge_toggle(void *private_);
-static void sharpsl_battery_thread(void *private_);
-
-
-/*
- * Variables
- */
-struct sharpsl_pm_status sharpsl_pm;
-DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL);
-DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL);
-
-
-static int get_percentage(int voltage)
-{
- int i = sharpsl_pm.machinfo->bat_levels - 1;
- struct battery_thresh *thresh;
-
- if (sharpsl_pm.charge_mode == CHRG_ON)
- thresh=sharpsl_pm.machinfo->bat_levels_acin;
- else
- thresh=sharpsl_pm.machinfo->bat_levels_noac;
-
- while (i > 0 && (voltage > thresh[i].voltage))
- i--;
-
- return thresh[i].percentage;
-}
-
-static int get_apm_status(int voltage)
-{
- int low_thresh, high_thresh;
-
- if (sharpsl_pm.charge_mode == CHRG_ON) {
- high_thresh = sharpsl_pm.machinfo->status_high_acin;
- low_thresh = sharpsl_pm.machinfo->status_low_acin;
- } else {
- high_thresh = sharpsl_pm.machinfo->status_high_noac;
- low_thresh = sharpsl_pm.machinfo->status_low_noac;
- }
-
- if (voltage >= high_thresh)
- return APM_BATTERY_STATUS_HIGH;
- if (voltage >= low_thresh)
- return APM_BATTERY_STATUS_LOW;
- return APM_BATTERY_STATUS_CRITICAL;
-}
-
-void sharpsl_battery_kick(void)
-{
- schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
-}
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
-
-static void sharpsl_battery_thread(void *private_)
-{
- int voltage, percent, apm_status, i = 0;
-
- if (!sharpsl_pm.machinfo)
- return;
-
- sharpsl_pm.battstat.ac_status = (!(STATUS_AC_IN) ? APM_AC_OFFLINE : APM_AC_ONLINE);
-
- /* Corgi cannot confirm when battery fully charged so periodically kick! */
- if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON)
- && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL))
- schedule_work(&toggle_charger);
-
- while(1) {
- voltage = sharpsl_read_MainBattery();
- if (voltage > 0) break;
- if (i++ > 5) {
- voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
- dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
- break;
- }
- }
-
- voltage = sharpsl_average_value(voltage);
- apm_status = get_apm_status(voltage);
- percent = get_percentage(voltage);
-
- /* At low battery voltages, the voltage has a tendency to start
- creeping back up so we try to avoid this here */
- if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) {
- sharpsl_pm.battstat.mainbat_voltage = voltage;
- sharpsl_pm.battstat.mainbat_status = apm_status;
- sharpsl_pm.battstat.mainbat_percent = percent;
- }
-
- dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage,
- sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
-
- /* If battery is low. limit backlight intensity to save power. */
- if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
- && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
- (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
- if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
- corgibl_limit_intensity(1);
- sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
- }
- } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
- corgibl_limit_intensity(0);
- sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
- }
-
- /* Suspend if critical battery level */
- if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
- && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
- && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
- sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
- dev_err(sharpsl_pm.dev, "Fatal Off\n");
- apm_queue_event(APM_CRITICAL_SUSPEND);
- }
-
- schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
-}
-
-static void sharpsl_charge_on(void)
-{
- dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
-
- sharpsl_pm.full_count = 0;
- sharpsl_pm.charge_mode = CHRG_ON;
- schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
- schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
-}
-
-static void sharpsl_charge_off(void)
-{
- dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
-
- CHARGE_OFF();
- CHARGE_LED_OFF();
- sharpsl_pm.charge_mode = CHRG_OFF;
-
- schedule_work(&sharpsl_bat);
-}
-
-static void sharpsl_charge_error(void)
-{
- CHARGE_LED_ERR();
- CHARGE_OFF();
- sharpsl_pm.charge_mode = CHRG_ERROR;
-}
-
-static void sharpsl_charge_toggle(void *private_)
-{
- dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
-
- if (STATUS_AC_IN == 0) {
- sharpsl_charge_off();
- return;
- } else if ((sharpsl_check_battery(1) < 0) || (sharpsl_ac_check() < 0)) {
- sharpsl_charge_error();
- return;
- }
-
- CHARGE_LED_ON();
- CHARGE_OFF();
- mdelay(SHARPSL_CHARGE_WAIT_TIME);
- CHARGE_ON();
-
- sharpsl_pm.charge_start_time = jiffies;
-}
-
-static void sharpsl_ac_timer(unsigned long data)
-{
- int acin = STATUS_AC_IN;
-
- dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
-
- sharpsl_average_clear();
- if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
- sharpsl_charge_on();
- else if (sharpsl_pm.charge_mode == CHRG_ON)
- sharpsl_charge_off();
-
- schedule_work(&sharpsl_bat);
-}
-
-
-static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp)
-{
- /* Delay the event slightly to debounce */
- /* Must be a smaller delay than the chrg_full_isr below */
- mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
- return IRQ_HANDLED;
-}
-
-static void sharpsl_chrg_full_timer(unsigned long data)
-{
- dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
-
- sharpsl_pm.full_count++;
-
- if (STATUS_AC_IN == 0) {
- dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
- if (sharpsl_pm.charge_mode == CHRG_ON)
- sharpsl_charge_off();
- } else if (sharpsl_pm.full_count < 2) {
- dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
- schedule_work(&toggle_charger);
- } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
- dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
- schedule_work(&toggle_charger);
- } else {
- sharpsl_charge_off();
- sharpsl_pm.charge_mode = CHRG_DONE;
- dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
- }
-}
-
-/* Charging Finished Interrupt (Not present on Corgi) */
-/* Can trigger at the same time as an AC staus change so
- delay until after that has been processed */
-static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp)
-{
- if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
- return IRQ_HANDLED;
-
- /* delay until after any ac interrupt */
- mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp)
-{
- int is_fatal = 0;
-
- if (STATUS_BATT_LOCKED == 0) {
- dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
- is_fatal = 1;
- }
-
- if (sharpsl_pm.machinfo->gpio_fatal && (STATUS_FATAL == 0)) {
- dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
- is_fatal = 1;
- }
-
- if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
- sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
- apm_queue_event(APM_CRITICAL_SUSPEND);
- }
-
- return IRQ_HANDLED;
-}
-
-/*
- * Maintain an average of the last 10 readings
- */
-#define SHARPSL_CNV_VALUE_NUM 10
-static int sharpsl_ad_index;
-
-static void sharpsl_average_clear(void)
-{
- sharpsl_ad_index = 0;
-}
-
-static int sharpsl_average_value(int ad)
-{
- int i, ad_val = 0;
- static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
-
- if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
- sharpsl_ad_index = 0;
- return ad;
- }
-
- sharpsl_ad[sharpsl_ad_index] = ad;
- sharpsl_ad_index++;
- if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
- for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
- sharpsl_ad[i] = sharpsl_ad[i+1];
- sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
- }
- for (i=0; i < sharpsl_ad_index; i++)
- ad_val += sharpsl_ad[i];
-
- return (ad_val / sharpsl_ad_index);
-}
-
-
/*
* Read MAX1111 ADC
*/
-static int read_max1111(int channel)
+int sharpsl_pm_pxa_read_max1111(int channel)
{
+ if (machine_is_tosa()) // Ugly, better move this function into another module
+ return 0;
+
return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
}
-static int sharpsl_read_MainBattery(void)
-{
- return read_max1111(BATT_AD);
-}
-
-static int sharpsl_read_Temp(void)
-{
- int temp;
-
- sharpsl_pm.machinfo->measure_temp(1);
-
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
- temp = read_max1111(BATT_THM);
-
- sharpsl_pm.machinfo->measure_temp(0);
-
- return temp;
-}
-
-static int sharpsl_read_jkvad(void)
-{
- return read_max1111(JK_VAD);
-}
-
-/*
- * Take an array of 5 integers, remove the maximum and minimum values
- * and return the average.
- */
-static int get_select_val(int *val)
-{
- int i, j, k, temp, sum = 0;
-
- /* Find MAX val */
- temp = val[0];
- j=0;
- for (i=1; i<5; i++) {
- if (temp < val[i]) {
- temp = val[i];
- j = i;
- }
- }
-
- /* Find MIN val */
- temp = val[4];
- k=4;
- for (i=3; i>=0; i--) {
- if (temp > val[i]) {
- temp = val[i];
- k = i;
- }
- }
-
- for (i=0; i<5; i++)
- if (i != j && i != k )
- sum += val[i];
-
- dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
-
- return (sum/3);
-}
-
-/* mode 0 - Check temperature and voltage
- * 1 - Check temperature only */
-static int sharpsl_check_battery(int mode)
-{
- int val, i, buff[5];
-
- /* Check battery temperature */
- for (i=0; i<5; i++) {
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
- buff[i] = sharpsl_read_Temp();
- }
-
- val = get_select_val(buff);
-
- dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
- if (val > SHARPSL_CHARGE_ON_TEMP)
- return -1;
- if (mode == 1)
- return 0;
-
- /* disable charge, enable discharge */
- CHARGE_OFF();
- DISCHARGE_ON();
- mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(1);
-
- /* Check battery voltage */
- for (i=0; i<5; i++) {
- buff[i] = sharpsl_read_MainBattery();
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
- }
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(0);
-
- DISCHARGE_OFF();
-
- val = get_select_val(buff);
- dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
-
- if (val < SHARPSL_CHARGE_ON_VOLT)
- return -1;
-
- return 0;
-}
-
-static int sharpsl_ac_check(void)
-{
- int temp, i, buff[5];
-
- for (i=0; i<5; i++) {
- buff[i] = sharpsl_read_jkvad();
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD);
- }
-
- temp = get_select_val(buff);
- dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
-
- if ((temp > SHARPSL_CHARGE_ON_JKVAD_HIGH) || (temp < SHARPSL_CHARGE_ON_JKVAD_LOW)) {
- dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
- return -1;
- }
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_pm_suspend(struct device *dev, pm_message_t state)
-{
- sharpsl_pm.flags |= SHARPSL_SUSPENDED;
- flush_scheduled_work();
-
- if (sharpsl_pm.charge_mode == CHRG_ON)
- sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
- else
- sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-
- return 0;
-}
-
-static int sharpsl_pm_resume(struct device *dev)
-{
- /* Clear the reset source indicators as they break the bootloader upon reboot */
- RCSR = 0x0f;
- sharpsl_average_clear();
- sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
- sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
-
- return 0;
-}
-
-static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
- dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
-
- dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
- /* not charging and AC-IN! */
-
- if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (STATUS_AC_IN != 0)) {
- dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
- sharpsl_pm.charge_mode = CHRG_OFF;
- sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
- sharpsl_off_charge_battery();
- }
-
- sharpsl_pm.machinfo->presuspend();
-
- PEDR = 0xffffffff; /* clear it */
-
- sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
- if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
- RTSR &= RTSR_ALE;
- RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
- dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
- sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
- } else if (alarm_enable) {
- RTSR &= RTSR_ALE;
- RTAR = alarm_time;
- dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
- } else {
- dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
- }
-
- pxa_pm_enter(state);
-
- sharpsl_pm.machinfo->postsuspend();
-
- dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
-}
-
-static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
- if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
- {
- if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
- dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
- corgi_goto_sleep(alarm_time, alarm_enable, state);
- return 1;
- }
- if(sharpsl_off_charge_battery()) {
- dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
- corgi_goto_sleep(alarm_time, alarm_enable, state);
- return 1;
- }
- dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
- }
-
- if ((STATUS_BATT_LOCKED == 0) || (sharpsl_fatal_check() < 0) )
- {
- dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
- corgi_goto_sleep(alarm_time, alarm_enable, state);
- return 1;
- }
-
- return 0;
-}
-
-static int corgi_pxa_pm_enter(suspend_state_t state)
-{
- unsigned long alarm_time = RTAR;
- unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
-
- dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
-
- corgi_goto_sleep(alarm_time, alarm_status, state);
-
- while (corgi_enter_suspend(alarm_time,alarm_status,state))
- {}
-
- dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
-
- return 0;
-}
-#endif
-
-
-/*
- * Check for fatal battery errors
- * Fatal returns -1
- */
-static int sharpsl_fatal_check(void)
-{
- int buff[5], temp, i, acin;
-
- dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
-
- /* Check AC-Adapter */
- acin = STATUS_AC_IN;
-
- if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
- CHARGE_OFF();
- udelay(100);
- DISCHARGE_ON(); /* enable discharge */
- mdelay(SHARPSL_WAIT_DISCHARGE_ON);
- }
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(1);
-
- /* Check battery : check inserting battery ? */
- for (i=0; i<5; i++) {
- buff[i] = sharpsl_read_MainBattery();
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
- }
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(0);
-
- if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
- udelay(100);
- CHARGE_ON();
- DISCHARGE_OFF();
- }
-
- temp = get_select_val(buff);
- dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_read_MainBattery());
-
- if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) ||
- (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT)))
- return -1;
- return 0;
-}
-
-static int sharpsl_off_charge_error(void)
-{
- dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n");
- CHARGE_OFF();
- CHARGE_LED_ERR();
- sharpsl_pm.charge_mode = CHRG_ERROR;
- return 1;
-}
-
-/*
- * Charging Control while suspended
- * Return 1 - go straight to sleep
- * Return 0 - sleep or wakeup depending on other factors
- */
-static int sharpsl_off_charge_battery(void)
-{
- int time;
-
- dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
-
- if (sharpsl_pm.charge_mode == CHRG_OFF) {
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
-
- /* AC Check */
- if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery(1) < 0))
- return sharpsl_off_charge_error();
-
- /* Start Charging */
- CHARGE_LED_ON();
- CHARGE_OFF();
- mdelay(SHARPSL_CHARGE_WAIT_TIME);
- CHARGE_ON();
-
- sharpsl_pm.charge_mode = CHRG_ON;
- sharpsl_pm.full_count = 0;
-
- return 1;
- } else if (sharpsl_pm.charge_mode != CHRG_ON) {
- return 1;
- }
-
- if (sharpsl_pm.full_count == 0) {
- int time;
-
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
-
- if (sharpsl_check_battery(0) < 0)
- return sharpsl_off_charge_error();
-
- CHARGE_OFF();
- mdelay(SHARPSL_CHARGE_WAIT_TIME);
- CHARGE_ON();
- sharpsl_pm.charge_mode = CHRG_ON;
-
- mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
- time = RCNR;
- while(1) {
- /* Check if any wakeup event had occured */
- if (sharpsl_pm.machinfo->charger_wakeup() != 0)
- return 0;
- /* Check for timeout */
- if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
- return 1;
- if (STATUS_CHRG_FULL) {
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n");
- sharpsl_pm.full_count++;
- CHARGE_OFF();
- mdelay(SHARPSL_CHARGE_WAIT_TIME);
- CHARGE_ON();
- return 1;
- }
- }
- }
-
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
-
- mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
- time = RCNR;
- while(1) {
- /* Check if any wakeup event had occured */
- if (sharpsl_pm.machinfo->charger_wakeup() != 0)
- return 0;
- /* Check for timeout */
- if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
- if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
- sharpsl_pm.full_count = 0;
- }
- sharpsl_pm.full_count++;
- return 1;
- }
- if (STATUS_CHRG_FULL) {
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
- CHARGE_LED_OFF();
- CHARGE_OFF();
- sharpsl_pm.charge_mode = CHRG_DONE;
- return 1;
- }
- }
-}
-
-
-static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
-}
-
-static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
-}
-
-static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
-static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
-
-extern void (*apm_get_power_status)(struct apm_power_info *);
-
-static void sharpsl_apm_get_power_status(struct apm_power_info *info)
+void sharpsl_pm_pxa_init(void)
{
- info->ac_line_status = sharpsl_pm.battstat.ac_status;
-
- if (sharpsl_pm.charge_mode == CHRG_ON)
- info->battery_status = APM_BATTERY_STATUS_CHARGING;
- else
- info->battery_status = sharpsl_pm.battstat.mainbat_status;
-
- info->battery_flag = (1 << info->battery_status);
- info->battery_life = sharpsl_pm.battstat.mainbat_percent;
-}
-
-static struct pm_ops sharpsl_pm_ops = {
- .pm_disk_mode = PM_DISK_FIRMWARE,
- .prepare = pxa_pm_prepare,
- .enter = corgi_pxa_pm_enter,
- .finish = pxa_pm_finish,
-};
-
-static int __init sharpsl_pm_probe(struct device *dev)
-{
- if (!dev->platform_data)
- return -EINVAL;
-
- sharpsl_pm.dev = dev;
- sharpsl_pm.machinfo = dev->platform_data;
- sharpsl_pm.charge_mode = CHRG_OFF;
- sharpsl_pm.flags = 0;
-
- sharpsl_pm.machinfo->init();
-
- init_timer(&sharpsl_pm.ac_timer);
- sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
-
- init_timer(&sharpsl_pm.chrg_full_timer);
- sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
-
pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN);
pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN);
/* Register interrupt handlers */
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, SA_INTERRUPT, "AC Input Detect", sharpsl_ac_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
}
else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE);
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, SA_INTERRUPT, "Battery Cover", sharpsl_fatal_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
}
else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING);
if (sharpsl_pm.machinfo->gpio_fatal) {
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, SA_INTERRUPT, "Fatal Battery", sharpsl_fatal_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
}
else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);
}
- if (!machine_is_corgi())
+ if (sharpsl_pm.machinfo->batfull_irq)
{
/* Register interrupt handler. */
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, SA_INTERRUPT, "CO", sharpsl_chrg_full_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
}
else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING);
}
-
- device_create_file(dev, &dev_attr_battery_percentage);
- device_create_file(dev, &dev_attr_battery_voltage);
-
- apm_get_power_status = sharpsl_apm_get_power_status;
-
- pm_set_ops(&sharpsl_pm_ops);
-
- mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
- return 0;
}
-static int sharpsl_pm_remove(struct device *dev)
+void sharpsl_pm_pxa_remove(void)
{
- pm_set_ops(NULL);
-
- device_remove_file(dev, &dev_attr_battery_percentage);
- device_remove_file(dev, &dev_attr_battery_voltage);
-
free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
if (sharpsl_pm.machinfo->gpio_fatal)
free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
- if (!machine_is_corgi())
+ if (sharpsl_pm.machinfo->batfull_irq)
free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
-
- del_timer_sync(&sharpsl_pm.chrg_full_timer);
- del_timer_sync(&sharpsl_pm.ac_timer);
-
- return 0;
}
-
-static struct device_driver sharpsl_pm_driver = {
- .name = "sharpsl-pm",
- .bus = &platform_bus_type,
- .probe = sharpsl_pm_probe,
- .remove = sharpsl_pm_remove,
- .suspend = sharpsl_pm_suspend,
- .resume = sharpsl_pm_resume,
-};
-
-static int __devinit sharpsl_pm_init(void)
-{
- return driver_register(&sharpsl_pm_driver);
-}
-
-static void sharpsl_pm_exit(void)
-{
- driver_unregister(&sharpsl_pm_driver);
-}
-
-late_initcall(sharpsl_pm_init);
-module_exit(sharpsl_pm_exit);
git.openpandora.org / pandora-kernel.git / blobdiff