Merge branch 'pci-for-jesse' of git://git.kernel.org/pub/scm/linux/kernel/git/tip...
[pandora-kernel.git] / arch / arm / mach-pxa / corgi_lcd.c
index a72476c..311baf1 100644 (file)
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/corgi.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
+#include <mach/akita.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 #include "generic.h"
@@ -40,7 +40,7 @@
 #define PICTRL_ADRS     0x06
 #define POLCTRL_ADRS    0x07
 
-/* Resgister Bit Definitions */
+/* Register Bit Definitions */
 #define RESCTL_QVGA     0x01
 #define RESCTL_VGA      0x00
 
 #define POWER0_COM_DCLK 0x01  /* COM Voltage DC Bias DAC Serial Data Clock */
 #define POWER0_COM_DOUT 0x02  /* COM Voltage DC Bias DAC Serial Data Out */
 #define POWER0_DAC_ON   0x04  /* DAC Power Supply ON */
-#define POWER0_COM_ON   0x08  /* COM Powewr Supply ON */
+#define POWER0_COM_ON   0x08  /* COM Power Supply ON */
 #define POWER0_VCC5_ON  0x10  /* VCC5 Power Supply ON */
 
 #define POWER0_DAC_OFF  0x00  /* DAC Power Supply OFF */
-#define POWER0_COM_OFF  0x00  /* COM Powewr Supply OFF */
+#define POWER0_COM_OFF  0x00  /* COM Power Supply OFF */
 #define POWER0_VCC5_OFF 0x00  /* VCC5 Power Supply OFF */
 
 #define PICTRL_INIT_STATE      0x01
@@ -145,7 +145,7 @@ static void lcdtg_set_common_voltage(u8 base_data, u8 data)
        lcdtg_i2c_send_stop(base_data);
 }
 
-/* Set Phase Adjuct */
+/* Set Phase Adjust */
 static void lcdtg_set_phadadj(int mode)
 {
        int adj;
@@ -173,7 +173,7 @@ static void lcdtg_set_phadadj(int mode)
 
 static int lcd_inited;
 
-static void lcdtg_hw_init(int mode)
+void corgi_lcdtg_hw_init(int mode)
 {
        if (!lcd_inited) {
                int comadj;
@@ -226,7 +226,7 @@ static void lcdtg_hw_init(int mode)
                /* Signals output enable */
                corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
 
-               /* Set Phase Adjuct */
+               /* Set Phase Adjust */
                lcdtg_set_phadadj(mode);
 
                /* Initialize for Input Signals from ATI */
@@ -254,7 +254,7 @@ static void lcdtg_hw_init(int mode)
        }
 }
 
-static void lcdtg_suspend(void)
+void corgi_lcdtg_suspend(void)
 {
        /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
        mdelay(34);
@@ -288,298 +288,3 @@ static void lcdtg_suspend(void)
        lcd_inited = 0;
 }
 
-
-/*
- * Corgi w100 Frame Buffer Device
- */
-#ifdef CONFIG_PXA_SHARP_C7xx
-
-#include <video/w100fb.h>
-
-static void w100_lcdtg_suspend(struct w100fb_par *par)
-{
-       lcdtg_suspend();
-}
-
-static void w100_lcdtg_init(struct w100fb_par *par)
-{
-       lcdtg_hw_init(par->xres);
-}
-
-
-static struct w100_tg_info corgi_lcdtg_info = {
-       .change  = w100_lcdtg_init,
-       .suspend = w100_lcdtg_suspend,
-       .resume  = w100_lcdtg_init,
-};
-
-static struct w100_mem_info corgi_fb_mem = {
-       .ext_cntl          = 0x00040003,
-       .sdram_mode_reg    = 0x00650021,
-       .ext_timing_cntl   = 0x10002a4a,
-       .io_cntl           = 0x7ff87012,
-       .size              = 0x1fffff,
-};
-
-static struct w100_gen_regs corgi_fb_regs = {
-       .lcd_format    = 0x00000003,
-       .lcdd_cntl1    = 0x01CC0000,
-       .lcdd_cntl2    = 0x0003FFFF,
-       .genlcd_cntl1  = 0x00FFFF0D,
-       .genlcd_cntl2  = 0x003F3003,
-       .genlcd_cntl3  = 0x000102aa,
-};
-
-static struct w100_gpio_regs corgi_fb_gpio = {
-       .init_data1   = 0x000000bf,
-       .init_data2   = 0x00000000,
-       .gpio_dir1    = 0x00000000,
-       .gpio_oe1     = 0x03c0feff,
-       .gpio_dir2    = 0x00000000,
-       .gpio_oe2     = 0x00000000,
-};
-
-static struct w100_mode corgi_fb_modes[] = {
-{
-       .xres            = 480,
-       .yres            = 640,
-       .left_margin     = 0x56,
-       .right_margin    = 0x55,
-       .upper_margin    = 0x03,
-       .lower_margin    = 0x00,
-       .crtc_ss         = 0x82360056,
-       .crtc_ls         = 0xA0280000,
-       .crtc_gs         = 0x80280028,
-       .crtc_vpos_gs    = 0x02830002,
-       .crtc_rev        = 0x00400008,
-       .crtc_dclk       = 0xA0000000,
-       .crtc_gclk       = 0x8015010F,
-       .crtc_goe        = 0x80100110,
-       .crtc_ps1_active = 0x41060010,
-       .pll_freq        = 75,
-       .fast_pll_freq   = 100,
-       .sysclk_src      = CLK_SRC_PLL,
-       .sysclk_divider  = 0,
-       .pixclk_src      = CLK_SRC_PLL,
-       .pixclk_divider  = 2,
-       .pixclk_divider_rotated = 6,
-},{
-       .xres            = 240,
-       .yres            = 320,
-       .left_margin     = 0x27,
-       .right_margin    = 0x2e,
-       .upper_margin    = 0x01,
-       .lower_margin    = 0x00,
-       .crtc_ss         = 0x81170027,
-       .crtc_ls         = 0xA0140000,
-       .crtc_gs         = 0xC0140014,
-       .crtc_vpos_gs    = 0x00010141,
-       .crtc_rev        = 0x00400008,
-       .crtc_dclk       = 0xA0000000,
-       .crtc_gclk       = 0x8015010F,
-       .crtc_goe        = 0x80100110,
-       .crtc_ps1_active = 0x41060010,
-       .pll_freq        = 0,
-       .fast_pll_freq   = 0,
-       .sysclk_src      = CLK_SRC_XTAL,
-       .sysclk_divider  = 0,
-       .pixclk_src      = CLK_SRC_XTAL,
-       .pixclk_divider  = 1,
-       .pixclk_divider_rotated = 1,
-},
-
-};
-
-static struct w100fb_mach_info corgi_fb_info = {
-       .tg         = &corgi_lcdtg_info,
-       .init_mode  = INIT_MODE_ROTATED,
-       .mem        = &corgi_fb_mem,
-       .regs       = &corgi_fb_regs,
-       .modelist   = &corgi_fb_modes[0],
-       .num_modes  = 2,
-       .gpio       = &corgi_fb_gpio,
-       .xtal_freq  = 12500000,
-       .xtal_dbl   = 0,
-};
-
-static struct resource corgi_fb_resources[] = {
-       [0] = {
-               .start   = 0x08000000,
-               .end     = 0x08ffffff,
-               .flags   = IORESOURCE_MEM,
-       },
-};
-
-struct platform_device corgifb_device = {
-       .name           = "w100fb",
-       .id             = -1,
-       .num_resources  = ARRAY_SIZE(corgi_fb_resources),
-       .resource       = corgi_fb_resources,
-       .dev            = {
-               .platform_data = &corgi_fb_info,
-               .parent = &corgissp_device.dev,
-       },
-
-};
-#endif
-
-
-/*
- * Spitz PXA Frame Buffer Device
- */
-#ifdef CONFIG_PXA_SHARP_Cxx00
-
-#include <asm/arch/pxafb.h>
-
-void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-       if (on)
-               lcdtg_hw_init(var->xres);
-       else
-               lcdtg_suspend();
-}
-
-#endif
-
-
-/*
- * Corgi/Spitz Touchscreen to LCD interface
- */
-static unsigned long (*get_hsync_time)(struct device *dev);
-
-static void inline sharpsl_wait_sync(int gpio)
-{
-       while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
-       while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
-}
-
-#ifdef CONFIG_PXA_SHARP_C7xx
-unsigned long corgi_get_hsync_len(void)
-{
-       if (!get_hsync_time)
-               get_hsync_time = symbol_get(w100fb_get_hsynclen);
-       if (!get_hsync_time)
-               return 0;
-
-       return get_hsync_time(&corgifb_device.dev);
-}
-
-void corgi_put_hsync(void)
-{
-       if (get_hsync_time)
-               symbol_put(w100fb_get_hsynclen);
-       get_hsync_time = NULL;
-}
-
-void corgi_wait_hsync(void)
-{
-       sharpsl_wait_sync(CORGI_GPIO_HSYNC);
-}
-#endif
-
-#ifdef CONFIG_PXA_SHARP_Cxx00
-static struct device *spitz_pxafb_dev;
-
-static int is_pxafb_device(struct device * dev, void * data)
-{
-       struct platform_device *pdev = container_of(dev, struct platform_device, dev);
-
-       return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
-}
-
-unsigned long spitz_get_hsync_len(void)
-{
-#ifdef CONFIG_FB_PXA
-       if (!spitz_pxafb_dev) {
-               spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
-               if (!spitz_pxafb_dev)
-                       return 0;
-       }
-       if (!get_hsync_time)
-               get_hsync_time = symbol_get(pxafb_get_hsync_time);
-       if (!get_hsync_time)
-#endif
-               return 0;
-
-       return pxafb_get_hsync_time(spitz_pxafb_dev);
-}
-
-void spitz_put_hsync(void)
-{
-       put_device(spitz_pxafb_dev);
-       if (get_hsync_time)
-               symbol_put(pxafb_get_hsync_time);
-       spitz_pxafb_dev = NULL;
-       get_hsync_time = NULL;
-}
-
-void spitz_wait_hsync(void)
-{
-       sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
-}
-#endif
-
-/*
- * Corgi/Spitz Backlight Power
- */
-#ifdef CONFIG_PXA_SHARP_C7xx
-void corgi_bl_set_intensity(int intensity)
-{
-       if (intensity > 0x10)
-               intensity += 0x10;
-
-       /* Bits 0-4 are accessed via the SSP interface */
-       corgi_ssp_blduty_set(intensity & 0x1f);
-
-       /* Bit 5 is via SCOOP */
-       if (intensity & 0x0020)
-               set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-       else
-               reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-}
-#endif
-
-
-#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-void spitz_bl_set_intensity(int intensity)
-{
-       if (intensity > 0x10)
-               intensity += 0x10;
-
-       /* Bits 0-4 are accessed via the SSP interface */
-       corgi_ssp_blduty_set(intensity & 0x1f);
-
-       /* Bit 5 is via SCOOP */
-       if (intensity & 0x0020)
-               reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-       else
-               set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-
-       if (intensity)
-               set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-       else
-               reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-}
-#endif
-
-#ifdef CONFIG_MACH_AKITA
-void akita_bl_set_intensity(int intensity)
-{
-       if (intensity > 0x10)
-               intensity += 0x10;
-
-       /* Bits 0-4 are accessed via the SSP interface */
-       corgi_ssp_blduty_set(intensity & 0x1f);
-
-       /* Bit 5 is via IO-Expander */
-       if (intensity & 0x0020)
-               akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-       else
-               akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-
-       if (intensity)
-               akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-       else
-               akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-}
-#endif