/*
* omap_hwmod implementation for OMAP2/3/4
*
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Nokia Corporation
*
* Paul Walmsley, Benoît Cousson, Kevin Hilman
*
}
/**
- * _init_interface_clk - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
/**
* _init_clocks - clk_get() all clocks associated with this hwmod
* @oh: struct omap_hwmod *
+ * @data: not used; pass NULL
*
* Called by omap_hwmod_late_init() (after omap2_clk_init()).
* Resolves all clock names embedded in the hwmod. Must be called
* has not yet been registered or if the clocks have already been
* initialized, 0 on success, or a non-zero error on failure.
*/
-static int _init_clocks(struct omap_hwmod *oh)
+static int _init_clocks(struct omap_hwmod *oh, void *data)
{
int ret = 0;
}
/**
- * _enable - enable an omap_hwmod
+ * _omap_hwmod_enable - enable an omap_hwmod
* @oh: struct omap_hwmod *
*
* Enables an omap_hwmod @oh such that the MPU can access the hwmod's
* Returns -EINVAL if the hwmod is in the wrong state or passes along
* the return value of _wait_target_ready().
*/
-static int _enable(struct omap_hwmod *oh)
+int _omap_hwmod_enable(struct omap_hwmod *oh)
{
int r;
* no further work. Returns -EINVAL if the hwmod is in the wrong
* state or returns 0.
*/
-static int _idle(struct omap_hwmod *oh)
+int _omap_hwmod_idle(struct omap_hwmod *oh)
{
if (oh->_state != _HWMOD_STATE_ENABLED) {
WARN(1, "omap_hwmod: %s: idle state can only be entered from "
/**
* _setup - do initial configuration of omap_hwmod
* @oh: struct omap_hwmod *
+ * @skip_setup_idle_p: do not idle hwmods at the end of the fn if 1
*
* Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
- * OCP_SYSCONFIG register. Must be called with omap_hwmod_mutex
- * held. Returns -EINVAL if the hwmod is in the wrong state or returns
- * 0.
+ * OCP_SYSCONFIG register. Must be called with omap_hwmod_mutex held.
+ * @skip_setup_idle is intended to be used on a system that will not
+ * call omap_hwmod_enable() to enable devices (e.g., a system without
+ * PM runtime). Returns -EINVAL if the hwmod is in the wrong state or
+ * returns 0.
*/
-static int _setup(struct omap_hwmod *oh)
+static int _setup(struct omap_hwmod *oh, void *data)
{
int i, r;
+ u8 skip_setup_idle;
- if (!oh)
+ if (!oh || !data)
return -EINVAL;
+ skip_setup_idle = *(u8 *)data;
+
/* Set iclk autoidle mode */
if (oh->slaves_cnt > 0) {
for (i = 0; i < oh->slaves_cnt; i++) {
oh->_state = _HWMOD_STATE_INITIALIZED;
- r = _enable(oh);
+ r = _omap_hwmod_enable(oh);
if (r) {
pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n",
oh->name, oh->_state);
* XXX Do the OCP_SYSCONFIG bits need to be
* reprogrammed after a reset? If not, then this can
* be removed. If they do, then probably the
- * _enable() function should be split to avoid the
+ * _omap_hwmod_enable() function should be split to avoid the
* rewrite of the OCP_SYSCONFIG register.
*/
if (oh->class->sysc) {
}
}
- if (!(oh->flags & HWMOD_INIT_NO_IDLE))
- _idle(oh);
+ if (!(oh->flags & HWMOD_INIT_NO_IDLE) && !skip_setup_idle)
+ _omap_hwmod_idle(oh);
return 0;
}
u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs)
{
- return __raw_readl(oh->_rt_va + reg_offs);
+ return __raw_readl(oh->_mpu_rt_va + reg_offs);
}
void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs)
{
- __raw_writel(v, oh->_rt_va + reg_offs);
+ __raw_writel(v, oh->_mpu_rt_va + reg_offs);
}
+/**
+ * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode
+ * @oh: struct omap_hwmod *
+ * @idlemode: SIDLEMODE field bits (shifted to bit 0)
+ *
+ * Sets the IP block's OCP slave idlemode in hardware, and updates our
+ * local copy. Intended to be used by drivers that have some erratum
+ * that requires direct manipulation of the SIDLEMODE bits. Returns
+ * -EINVAL if @oh is null, or passes along the return value from
+ * _set_slave_idlemode().
+ *
+ * XXX Does this function have any current users? If not, we should
+ * remove it; it is better to let the rest of the hwmod code handle this.
+ * Any users of this function should be scrutinized carefully.
+ */
int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode)
{
u32 v;
ms_id = _find_mpu_port_index(oh);
if (!IS_ERR_VALUE(ms_id)) {
oh->_mpu_port_index = ms_id;
- oh->_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
+ oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
} else {
oh->_int_flags |= _HWMOD_NO_MPU_PORT;
}
/**
* omap_hwmod_for_each - call function for each registered omap_hwmod
* @fn: pointer to a callback function
+ * @data: void * data to pass to callback function
*
* Call @fn for each registered omap_hwmod, passing @data to each
* function. @fn must return 0 for success or any other value for
* caller of omap_hwmod_for_each(). @fn is called with
* omap_hwmod_for_each() held.
*/
-int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh))
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
+ void *data)
{
struct omap_hwmod *temp_oh;
int ret;
mutex_lock(&omap_hwmod_mutex);
list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
- ret = (*fn)(temp_oh);
+ ret = (*fn)(temp_oh, data);
if (ret)
break;
}
/**
* omap_hwmod_late_init - do some post-clock framework initialization
+ * @skip_setup_idle: if 1, do not idle hwmods in _setup()
*
* Must be called after omap2_clk_init(). Resolves the struct clk names
* to struct clk pointers for each registered omap_hwmod. Also calls
* _setup() on each hwmod. Returns 0.
*/
-int omap_hwmod_late_init(void)
+int omap_hwmod_late_init(u8 skip_setup_idle)
{
int r;
/* XXX check return value */
- r = omap_hwmod_for_each(_init_clocks);
+ r = omap_hwmod_for_each(_init_clocks, NULL);
WARN(r, "omap_hwmod: omap_hwmod_late_init(): _init_clocks failed\n");
mpu_oh = omap_hwmod_lookup(MPU_INITIATOR_NAME);
WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n",
MPU_INITIATOR_NAME);
- omap_hwmod_for_each(_setup);
+ if (skip_setup_idle)
+ pr_debug("omap_hwmod: will leave hwmods enabled during setup\n");
+
+ omap_hwmod_for_each(_setup, &skip_setup_idle);
return 0;
}
pr_debug("omap_hwmod: %s: unregistering\n", oh->name);
mutex_lock(&omap_hwmod_mutex);
- iounmap(oh->_rt_va);
+ iounmap(oh->_mpu_rt_va);
list_del(&oh->node);
mutex_unlock(&omap_hwmod_mutex);
return -EINVAL;
mutex_lock(&omap_hwmod_mutex);
- r = _enable(oh);
+ r = _omap_hwmod_enable(oh);
mutex_unlock(&omap_hwmod_mutex);
return r;
}
+
/**
* omap_hwmod_idle - idle an omap_hwmod
* @oh: struct omap_hwmod *
return -EINVAL;
mutex_lock(&omap_hwmod_mutex);
- _idle(oh);
+ _omap_hwmod_idle(oh);
mutex_unlock(&omap_hwmod_mutex);
return 0;
mutex_lock(&omap_hwmod_mutex);
r = _reset(oh);
if (!r)
- r = _enable(oh);
+ r = _omap_hwmod_enable(oh);
mutex_unlock(&omap_hwmod_mutex);
return r;
}
+/**
+ * omap_hwmod_get_mpu_rt_va - return the module's base address (for the MPU)
+ * @oh: struct omap_hwmod *
+ *
+ * Returns the virtual address corresponding to the beginning of the
+ * module's register target, in the address range that is intended to
+ * be used by the MPU. Returns the virtual address upon success or NULL
+ * upon error.
+ */
+void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh)
+{
+ if (!oh)
+ return NULL;
+
+ if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+ return NULL;
+
+ if (oh->_state == _HWMOD_STATE_UNKNOWN)
+ return NULL;
+
+ return oh->_mpu_rt_va;
+}
+
/**
* omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh
* @oh: struct omap_hwmod *
git.openpandora.org / pandora-kernel.git / blobdiff