+++ /dev/null
-/*
- * linux/arch/arm/mach-omap2/clock24xx.h
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2008 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
-
-#include "clock.h"
-
-#include "prm.h"
-#include "cm.h"
-#include "prm-regbits-24xx.h"
-#include "cm-regbits-24xx.h"
-#include "sdrc.h"
-
-/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
-#ifdef CONFIG_ARCH_OMAP2420
-#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
-#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL
-#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL
-#else
-#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
-#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL
-#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL
-#endif
-
-static unsigned long omap2_table_mpu_recalc(struct clk *clk);
-static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
-static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
-static unsigned long omap2_sys_clk_recalc(struct clk *clk);
-static unsigned long omap2_osc_clk_recalc(struct clk *clk);
-static unsigned long omap2_sys_clk_recalc(struct clk *clk);
-static unsigned long omap2_dpllcore_recalc(struct clk *clk);
-static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
-
-/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
- * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- */
-struct prcm_config {
- unsigned long xtal_speed; /* crystal rate */
- unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */
- unsigned long mpu_speed; /* speed of MPU */
- unsigned long cm_clksel_mpu; /* mpu divider */
- unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */
- unsigned long cm_clksel_gfx; /* gfx dividers */
- unsigned long cm_clksel1_core; /* major subsystem dividers */
- unsigned long cm_clksel1_pll; /* m,n */
- unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */
- unsigned long cm_clksel_mdm; /* modem dividers 2430 only */
- unsigned long base_sdrc_rfr; /* base refresh timing for a set */
- unsigned char flags;
-};
-
-/*
- * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
- * These configurations are characterized by voltage and speed for clocks.
- * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
- * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
- */
-
-/* Core fields for cm_clksel, not ratio governed */
-#define RX_CLKSEL_DSS1 (0x10 << 8)
-#define RX_CLKSEL_DSS2 (0x0 << 13)
-#define RX_CLKSEL_SSI (0x5 << 20)
-
-/*-------------------------------------------------------------------------
- * Voltage/DPLL ratios
- *-------------------------------------------------------------------------*/
-
-/* 2430 Ratio's, 2430-Ratio Config 1 */
-#define R1_CLKSEL_L3 (4 << 0)
-#define R1_CLKSEL_L4 (2 << 5)
-#define R1_CLKSEL_USB (4 << 25)
-#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \
- RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
- R1_CLKSEL_L4 | R1_CLKSEL_L3
-#define R1_CLKSEL_MPU (2 << 0)
-#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU
-#define R1_CLKSEL_DSP (2 << 0)
-#define R1_CLKSEL_DSP_IF (2 << 5)
-#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
-#define R1_CLKSEL_GFX (2 << 0)
-#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX
-#define R1_CLKSEL_MDM (4 << 0)
-#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM
-
-/* 2430-Ratio Config 2 */
-#define R2_CLKSEL_L3 (6 << 0)
-#define R2_CLKSEL_L4 (2 << 5)
-#define R2_CLKSEL_USB (2 << 25)
-#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \
- RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
- R2_CLKSEL_L4 | R2_CLKSEL_L3
-#define R2_CLKSEL_MPU (2 << 0)
-#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU
-#define R2_CLKSEL_DSP (2 << 0)
-#define R2_CLKSEL_DSP_IF (3 << 5)
-#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
-#define R2_CLKSEL_GFX (2 << 0)
-#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX
-#define R2_CLKSEL_MDM (6 << 0)
-#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM
-
-/* 2430-Ratio Bootm (BYPASS) */
-#define RB_CLKSEL_L3 (1 << 0)
-#define RB_CLKSEL_L4 (1 << 5)
-#define RB_CLKSEL_USB (1 << 25)
-#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \
- RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
- RB_CLKSEL_L4 | RB_CLKSEL_L3
-#define RB_CLKSEL_MPU (1 << 0)
-#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU
-#define RB_CLKSEL_DSP (1 << 0)
-#define RB_CLKSEL_DSP_IF (1 << 5)
-#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
-#define RB_CLKSEL_GFX (1 << 0)
-#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX
-#define RB_CLKSEL_MDM (1 << 0)
-#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM
-
-/* 2420 Ratio Equivalents */
-#define RXX_CLKSEL_VLYNQ (0x12 << 15)
-#define RXX_CLKSEL_SSI (0x8 << 20)
-
-/* 2420-PRCM III 532MHz core */
-#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */
-#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */
-#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */
-#define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
- RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
- RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
- RIII_CLKSEL_L3
-#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */
-#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU
-#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */
-#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */
-#define RIII_SYNC_DSP (1 << 7) /* Enable sync */
-#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */
-#define RIII_SYNC_IVA (1 << 13) /* Enable sync */
-#define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
- RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
- RIII_CLKSEL_DSP
-#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */
-#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX
-
-/* 2420-PRCM II 600MHz core */
-#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */
-#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */
-#define RII_CLKSEL_USB (2 << 25) /* 50MHz */
-#define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \
- RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
- RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
- RII_CLKSEL_L4 | RII_CLKSEL_L3
-#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */
-#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU
-#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */
-#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */
-#define RII_SYNC_DSP (0 << 7) /* Bypass sync */
-#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */
-#define RII_SYNC_IVA (0 << 13) /* Bypass sync */
-#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \
- RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
- RII_CLKSEL_DSP
-#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */
-#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX
-
-/* 2420-PRCM I 660MHz core */
-#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */
-#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */
-#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */
-#define RI_CM_CLKSEL1_CORE_VAL RI_CLKSEL_USB | \
- RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
- RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
- RI_CLKSEL_L4 | RI_CLKSEL_L3
-#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */
-#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU
-#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */
-#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */
-#define RI_SYNC_DSP (1 << 7) /* Activate sync */
-#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */
-#define RI_SYNC_IVA (0 << 13) /* Bypass sync */
-#define RI_CM_CLKSEL_DSP_VAL RI_SYNC_IVA | RI_CLKSEL_IVA | \
- RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
- RI_CLKSEL_DSP
-#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */
-#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX
-
-/* 2420-PRCM VII (boot) */
-#define RVII_CLKSEL_L3 (1 << 0)
-#define RVII_CLKSEL_L4 (1 << 5)
-#define RVII_CLKSEL_DSS1 (1 << 8)
-#define RVII_CLKSEL_DSS2 (0 << 13)
-#define RVII_CLKSEL_VLYNQ (1 << 15)
-#define RVII_CLKSEL_SSI (1 << 20)
-#define RVII_CLKSEL_USB (1 << 25)
-
-#define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
- RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
- RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
-
-#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */
-#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU
-
-#define RVII_CLKSEL_DSP (1 << 0)
-#define RVII_CLKSEL_DSP_IF (1 << 5)
-#define RVII_SYNC_DSP (0 << 7)
-#define RVII_CLKSEL_IVA (1 << 8)
-#define RVII_SYNC_IVA (0 << 13)
-#define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
- RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
-
-#define RVII_CLKSEL_GFX (1 << 0)
-#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX
-
-/*-------------------------------------------------------------------------
- * 2430 Target modes: Along with each configuration the CPU has several
- * modes which goes along with them. Modes mainly are the addition of
- * describe DPLL combinations to go along with a ratio.
- *-------------------------------------------------------------------------*/
-
-/* Hardware governed */
-#define MX_48M_SRC (0 << 3)
-#define MX_54M_SRC (0 << 5)
-#define MX_APLLS_CLIKIN_12 (3 << 23)
-#define MX_APLLS_CLIKIN_13 (2 << 23)
-#define MX_APLLS_CLIKIN_19_2 (0 << 23)
-
-/*
- * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
- * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz
- */
-#define M5A_DPLL_MULT_12 (133 << 12)
-#define M5A_DPLL_DIV_12 (5 << 8)
-#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-#define M5A_DPLL_MULT_13 (61 << 12)
-#define M5A_DPLL_DIV_13 (2 << 8)
-#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
- M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13
-#define M5A_DPLL_MULT_19 (55 << 12)
-#define M5A_DPLL_DIV_19 (3 << 8)
-#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
- M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
- MX_APLLS_CLIKIN_19_2
-/* #5b (ratio1) target DPLL = 200*2 = 400MHz */
-#define M5B_DPLL_MULT_12 (50 << 12)
-#define M5B_DPLL_DIV_12 (2 << 8)
-#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-#define M5B_DPLL_MULT_13 (200 << 12)
-#define M5B_DPLL_DIV_13 (12 << 8)
-
-#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
- M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13
-#define M5B_DPLL_MULT_19 (125 << 12)
-#define M5B_DPLL_DIV_19 (31 << 8)
-#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
- M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
- MX_APLLS_CLIKIN_19_2
-/*
- * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
- */
-#define M4_DPLL_MULT_12 (133 << 12)
-#define M4_DPLL_DIV_12 (3 << 8)
-#define M4_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-
-#define M4_DPLL_MULT_13 (399 << 12)
-#define M4_DPLL_DIV_13 (12 << 8)
-#define M4_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
- M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13
-
-#define M4_DPLL_MULT_19 (145 << 12)
-#define M4_DPLL_DIV_19 (6 << 8)
-#define M4_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
- M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
- MX_APLLS_CLIKIN_19_2
-
-/*
- * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz
- */
-#define M3_DPLL_MULT_12 (55 << 12)
-#define M3_DPLL_DIV_12 (1 << 8)
-#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-#define M3_DPLL_MULT_13 (76 << 12)
-#define M3_DPLL_DIV_13 (2 << 8)
-#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
- M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13
-#define M3_DPLL_MULT_19 (17 << 12)
-#define M3_DPLL_DIV_19 (0 << 8)
-#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
- M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
- MX_APLLS_CLIKIN_19_2
-
-/*
- * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
- */
-#define M2_DPLL_MULT_12 (55 << 12)
-#define M2_DPLL_DIV_12 (1 << 8)
-#define M2_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-
-/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
- * relock time issue */
-/* Core frequency changed from 330/165 to 329/164 MHz*/
-#define M2_DPLL_MULT_13 (76 << 12)
-#define M2_DPLL_DIV_13 (2 << 8)
-#define M2_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
- M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13
-
-#define M2_DPLL_MULT_19 (17 << 12)
-#define M2_DPLL_DIV_19 (0 << 8)
-#define M2_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
- M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
- MX_APLLS_CLIKIN_19_2
-
-/* boot (boot) */
-#define MB_DPLL_MULT (1 << 12)
-#define MB_DPLL_DIV (0 << 8)
-#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
- MB_DPLL_MULT | MX_APLLS_CLIKIN_12
-
-#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
- MB_DPLL_MULT | MX_APLLS_CLIKIN_13
-
-#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
- MB_DPLL_MULT | MX_APLLS_CLIKIN_19
-
-/*
- * 2430 - chassis (sedna)
- * 165 (ratio1) same as above #2
- * 150 (ratio1)
- * 133 (ratio2) same as above #4
- * 110 (ratio2) same as above #3
- * 104 (ratio2)
- * boot (boot)
- */
-
-/* PRCM I target DPLL = 2*330MHz = 660MHz */
-#define MI_DPLL_MULT_12 (55 << 12)
-#define MI_DPLL_DIV_12 (1 << 8)
-#define MI_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-
-/*
- * 2420 Equivalent - mode registers
- * PRCM II , target DPLL = 2*300MHz = 600MHz
- */
-#define MII_DPLL_MULT_12 (50 << 12)
-#define MII_DPLL_DIV_12 (1 << 8)
-#define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-#define MII_DPLL_MULT_13 (300 << 12)
-#define MII_DPLL_DIV_13 (12 << 8)
-#define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
- MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13
-
-/* PRCM III target DPLL = 2*266 = 532MHz*/
-#define MIII_DPLL_MULT_12 (133 << 12)
-#define MIII_DPLL_DIV_12 (5 << 8)
-#define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
- MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
- MX_APLLS_CLIKIN_12
-#define MIII_DPLL_MULT_13 (266 << 12)
-#define MIII_DPLL_DIV_13 (12 << 8)
-#define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
- MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
- MX_APLLS_CLIKIN_13
-
-/* PRCM VII (boot bypass) */
-#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL
-#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL
-
-/* High and low operation value */
-#define MX_CLKSEL2_PLL_2x_VAL (2 << 0)
-#define MX_CLKSEL2_PLL_1x_VAL (1 << 0)
-
-/* MPU speed defines */
-#define S12M 12000000
-#define S13M 13000000
-#define S19M 19200000
-#define S26M 26000000
-#define S100M 100000000
-#define S133M 133000000
-#define S150M 150000000
-#define S164M 164000000
-#define S165M 165000000
-#define S199M 199000000
-#define S200M 200000000
-#define S266M 266000000
-#define S300M 300000000
-#define S329M 329000000
-#define S330M 330000000
-#define S399M 399000000
-#define S400M 400000000
-#define S532M 532000000
-#define S600M 600000000
-#define S658M 658000000
-#define S660M 660000000
-#define S798M 798000000
-
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
- * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
- * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- *
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
- *
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used. Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set. The exception is the bypass setting which is
- * availble for low power bypass.
- *
- * Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
-static struct prcm_config rate_table[] = {
- /* PRCM I - FAST */
- {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
- RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
- RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
- RATE_IN_242X},
-
- /* PRCM II - FAST */
- {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
- RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
- RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
- RATE_IN_242X},
-
- {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
- RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
- RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
- RATE_IN_242X},
-
- /* PRCM III - FAST */
- {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
- RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
- RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
- RATE_IN_242X},
-
- {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
- RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
- RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
- RATE_IN_242X},
-
- /* PRCM II - SLOW */
- {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
- RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
- RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
- RATE_IN_242X},
-
- {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
- RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
- RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
- RATE_IN_242X},
-
- /* PRCM III - SLOW */
- {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
- RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
- RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
- RATE_IN_242X},
-
- {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
- RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
- RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
- RATE_IN_242X},
-
- /* PRCM-VII (boot-bypass) */
- {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/
- RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
- RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
- RATE_IN_242X},
-
- /* PRCM-VII (boot-bypass) */
- {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */
- RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
- RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
- RATE_IN_242X},
-
- /* PRCM #4 - ratio2 (ES2.1) - FAST */
- {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
- R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
- R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_133MHz,
- RATE_IN_243X},
-
- /* PRCM #2 - ratio1 (ES2) - FAST */
- {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_165MHz,
- RATE_IN_243X},
-
- /* PRCM #5a - ratio1 - FAST */
- {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_133MHz,
- RATE_IN_243X},
-
- /* PRCM #5b - ratio1 - FAST */
- {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_100MHz,
- RATE_IN_243X},
-
- /* PRCM #4 - ratio1 (ES2.1) - SLOW */
- {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
- R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
- R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_133MHz,
- RATE_IN_243X},
-
- /* PRCM #2 - ratio1 (ES2) - SLOW */
- {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_165MHz,
- RATE_IN_243X},
-
- /* PRCM #5a - ratio1 - SLOW */
- {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_133MHz,
- RATE_IN_243X},
-
- /* PRCM #5b - ratio1 - SLOW*/
- {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */
- R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
- R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_100MHz,
- RATE_IN_243X},
-
- /* PRCM-boot/bypass */
- {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */
- RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
- RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
- MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_BYPASS,
- RATE_IN_243X},
-
- /* PRCM-boot/bypass */
- {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */
- RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
- RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
- MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
- SDRC_RFR_CTRL_BYPASS,
- RATE_IN_243X},
-
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
-};
-
-/*-------------------------------------------------------------------------
- * 24xx clock tree.
- *
- * NOTE:In many cases here we are assigning a 'default' parent. In many
- * cases the parent is selectable. The get/set parent calls will also
- * switch sources.
- *
- * Many some clocks say always_enabled, but they can be auto idled for
- * power savings. They will always be available upon clock request.
- *
- * Several sources are given initial rates which may be wrong, this will
- * be fixed up in the init func.
- *
- * Things are broadly separated below by clock domains. It is
- * noteworthy that most periferals have dependencies on multiple clock
- * domains. Many get their interface clocks from the L4 domain, but get
- * functional clocks from fixed sources or other core domain derived
- * clocks.
- *-------------------------------------------------------------------------*/
-
-/* Base external input clocks */
-static struct clk func_32k_ck = {
- .name = "func_32k_ck",
- .ops = &clkops_null,
- .rate = 32000,
- .flags = RATE_FIXED,
- .clkdm_name = "wkup_clkdm",
-};
-
-static struct clk secure_32k_ck = {
- .name = "secure_32k_ck",
- .ops = &clkops_null,
- .rate = 32768,
- .flags = RATE_FIXED,
- .clkdm_name = "wkup_clkdm",
-};
-
-/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
-static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
- .name = "osc_ck",
- .ops = &clkops_oscck,
- .clkdm_name = "wkup_clkdm",
- .recalc = &omap2_osc_clk_recalc,
-};
-
-/* Without modem likely 12MHz, with modem likely 13MHz */
-static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */
- .name = "sys_ck", /* ~ ref_clk also */
- .ops = &clkops_null,
- .parent = &osc_ck,
- .clkdm_name = "wkup_clkdm",
- .recalc = &omap2_sys_clk_recalc,
-};
-
-static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */
- .name = "alt_ck",
- .ops = &clkops_null,
- .rate = 54000000,
- .flags = RATE_FIXED,
- .clkdm_name = "wkup_clkdm",
-};
-
-/*
- * Analog domain root source clocks
- */
-
-/* dpll_ck, is broken out in to special cases through clksel */
-/* REVISIT: Rate changes on dpll_ck trigger a full set change. ...
- * deal with this
- */
-
-static struct dpll_data dpll_dd = {
- .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .mult_mask = OMAP24XX_DPLL_MULT_MASK,
- .div1_mask = OMAP24XX_DPLL_DIV_MASK,
- .clk_bypass = &sys_ck,
- .clk_ref = &sys_ck,
- .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
- .enable_mask = OMAP24XX_EN_DPLL_MASK,
- .max_multiplier = 1024,
- .min_divider = 1,
- .max_divider = 16,
- .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-/*
- * XXX Cannot add round_rate here yet, as this is still a composite clock,
- * not just a DPLL
- */
-static struct clk dpll_ck = {
- .name = "dpll_ck",
- .ops = &clkops_null,
- .parent = &sys_ck, /* Can be func_32k also */
- .dpll_data = &dpll_dd,
- .clkdm_name = "wkup_clkdm",
- .recalc = &omap2_dpllcore_recalc,
- .set_rate = &omap2_reprogram_dpllcore,
-};
-
-static struct clk apll96_ck = {
- .name = "apll96_ck",
- .ops = &clkops_apll96,
- .parent = &sys_ck,
- .rate = 96000000,
- .flags = RATE_FIXED | ENABLE_ON_INIT,
- .clkdm_name = "wkup_clkdm",
- .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
- .enable_bit = OMAP24XX_EN_96M_PLL_SHIFT,
-};
-
-static struct clk apll54_ck = {
- .name = "apll54_ck",
- .ops = &clkops_apll54,
- .parent = &sys_ck,
- .rate = 54000000,
- .flags = RATE_FIXED | ENABLE_ON_INIT,
- .clkdm_name = "wkup_clkdm",
- .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
- .enable_bit = OMAP24XX_EN_54M_PLL_SHIFT,
-};
-
-/*
- * PRCM digital base sources
- */
-
-/* func_54m_ck */
-
-static const struct clksel_rate func_54m_apll54_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 0 },
-};
-
-static const struct clksel_rate func_54m_alt_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 0 },
-};
-
-static const struct clksel func_54m_clksel[] = {
- { .parent = &apll54_ck, .rates = func_54m_apll54_rates, },
- { .parent = &alt_ck, .rates = func_54m_alt_rates, },
- { .parent = NULL },
-};
-
-static struct clk func_54m_ck = {
- .name = "func_54m_ck",
- .ops = &clkops_null,
- .parent = &apll54_ck, /* can also be alt_clk */
- .clkdm_name = "wkup_clkdm",
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_54M_SOURCE,
- .clksel = func_54m_clksel,
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk core_ck = {
- .name = "core_ck",
- .ops = &clkops_null,
- .parent = &dpll_ck, /* can also be 32k */
- .clkdm_name = "wkup_clkdm",
- .recalc = &followparent_recalc,
-};
-
-/* func_96m_ck */
-static const struct clksel_rate func_96m_apll96_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 0 },
-};
-
-static const struct clksel_rate func_96m_alt_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_243X | DEFAULT_RATE },
- { .div = 0 },
-};
-
-static const struct clksel func_96m_clksel[] = {
- { .parent = &apll96_ck, .rates = func_96m_apll96_rates },
- { .parent = &alt_ck, .rates = func_96m_alt_rates },
- { .parent = NULL }
-};
-
-/* The parent of this clock is not selectable on 2420. */
-static struct clk func_96m_ck = {
- .name = "func_96m_ck",
- .ops = &clkops_null,
- .parent = &apll96_ck,
- .clkdm_name = "wkup_clkdm",
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP2430_96M_SOURCE,
- .clksel = func_96m_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-/* func_48m_ck */
-
-static const struct clksel_rate func_48m_apll96_rates[] = {
- { .div = 2, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 0 },
-};
-
-static const struct clksel_rate func_48m_alt_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 0 },
-};
-
-static const struct clksel func_48m_clksel[] = {
- { .parent = &apll96_ck, .rates = func_48m_apll96_rates },
- { .parent = &alt_ck, .rates = func_48m_alt_rates },
- { .parent = NULL }
-};
-
-static struct clk func_48m_ck = {
- .name = "func_48m_ck",
- .ops = &clkops_null,
- .parent = &apll96_ck, /* 96M or Alt */
- .clkdm_name = "wkup_clkdm",
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_48M_SOURCE,
- .clksel = func_48m_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-static struct clk func_12m_ck = {
- .name = "func_12m_ck",
- .ops = &clkops_null,
- .parent = &func_48m_ck,
- .fixed_div = 4,
- .clkdm_name = "wkup_clkdm",
- .recalc = &omap2_fixed_divisor_recalc,
-};
-
-/* Secure timer, only available in secure mode */
-static struct clk wdt1_osc_ck = {
- .name = "ck_wdt1_osc",
- .ops = &clkops_null, /* RMK: missing? */
- .parent = &osc_ck,
- .recalc = &followparent_recalc,
-};
-
-/*
- * The common_clkout* clksel_rate structs are common to
- * sys_clkout, sys_clkout_src, sys_clkout2, and sys_clkout2_src.
- * sys_clkout2_* are 2420-only, so the
- * clksel_rate flags fields are inaccurate for those clocks. This is
- * harmless since access to those clocks are gated by the struct clk
- * flags fields, which mark them as 2420-only.
- */
-static const struct clksel_rate common_clkout_src_core_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_96m_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_54m_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel common_clkout_src_clksel[] = {
- { .parent = &core_ck, .rates = common_clkout_src_core_rates },
- { .parent = &sys_ck, .rates = common_clkout_src_sys_rates },
- { .parent = &func_96m_ck, .rates = common_clkout_src_96m_rates },
- { .parent = &func_54m_ck, .rates = common_clkout_src_54m_rates },
- { .parent = NULL }
-};
-
-static struct clk sys_clkout_src = {
- .name = "sys_clkout_src",
- .ops = &clkops_omap2_dflt,
- .parent = &func_54m_ck,
- .clkdm_name = "wkup_clkdm",
- .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
- .enable_bit = OMAP24XX_CLKOUT_EN_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
- .clksel_mask = OMAP24XX_CLKOUT_SOURCE_MASK,
- .clksel = common_clkout_src_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-static const struct clksel_rate common_clkout_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 2, .val = 1, .flags = RATE_IN_24XX },
- { .div = 4, .val = 2, .flags = RATE_IN_24XX },
- { .div = 8, .val = 3, .flags = RATE_IN_24XX },
- { .div = 16, .val = 4, .flags = RATE_IN_24XX },
- { .div = 0 },
-};
-
-static const struct clksel sys_clkout_clksel[] = {
- { .parent = &sys_clkout_src, .rates = common_clkout_rates },
- { .parent = NULL }
-};
-
-static struct clk sys_clkout = {
- .name = "sys_clkout",
- .ops = &clkops_null,
- .parent = &sys_clkout_src,
- .clkdm_name = "wkup_clkdm",
- .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
- .clksel_mask = OMAP24XX_CLKOUT_DIV_MASK,
- .clksel = sys_clkout_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-/* In 2430, new in 2420 ES2 */
-static struct clk sys_clkout2_src = {
- .name = "sys_clkout2_src",
- .ops = &clkops_omap2_dflt,
- .parent = &func_54m_ck,
- .clkdm_name = "wkup_clkdm",
- .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
- .enable_bit = OMAP2420_CLKOUT2_EN_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
- .clksel_mask = OMAP2420_CLKOUT2_SOURCE_MASK,
- .clksel = common_clkout_src_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-static const struct clksel sys_clkout2_clksel[] = {
- { .parent = &sys_clkout2_src, .rates = common_clkout_rates },
- { .parent = NULL }
-};
-
-/* In 2430, new in 2420 ES2 */
-static struct clk sys_clkout2 = {
- .name = "sys_clkout2",
- .ops = &clkops_null,
- .parent = &sys_clkout2_src,
- .clkdm_name = "wkup_clkdm",
- .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
- .clksel_mask = OMAP2420_CLKOUT2_DIV_MASK,
- .clksel = sys_clkout2_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-static struct clk emul_ck = {
- .name = "emul_ck",
- .ops = &clkops_omap2_dflt,
- .parent = &func_54m_ck,
- .clkdm_name = "wkup_clkdm",
- .enable_reg = OMAP24XX_PRCM_CLKEMUL_CTRL,
- .enable_bit = OMAP24XX_EMULATION_EN_SHIFT,
- .recalc = &followparent_recalc,
-
-};
-
-/*
- * MPU clock domain
- * Clocks:
- * MPU_FCLK, MPU_ICLK
- * INT_M_FCLK, INT_M_I_CLK
- *
- * - Individual clocks are hardware managed.
- * - Base divider comes from: CM_CLKSEL_MPU
- *
- */
-static const struct clksel_rate mpu_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 4, .val = 4, .flags = RATE_IN_242X },
- { .div = 6, .val = 6, .flags = RATE_IN_242X },
- { .div = 8, .val = 8, .flags = RATE_IN_242X },
- { .div = 0 },
-};
-
-static const struct clksel mpu_clksel[] = {
- { .parent = &core_ck, .rates = mpu_core_rates },
- { .parent = NULL }
-};
-
-static struct clk mpu_ck = { /* Control cpu */
- .name = "mpu_ck",
- .ops = &clkops_null,
- .parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
- .clkdm_name = "mpu_clkdm",
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
- .clksel_mask = OMAP24XX_CLKSEL_MPU_MASK,
- .clksel = mpu_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-/*
- * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
- * Clocks:
- * 2430: IVA2.1_FCLK (really just DSP_FCLK), IVA2.1_ICLK
- * 2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
- *
- * Won't be too specific here. The core clock comes into this block
- * it is divided then tee'ed. One branch goes directly to xyz enable
- * controls. The other branch gets further divided by 2 then possibly
- * routed into a synchronizer and out of clocks abc.
- */
-static const struct clksel_rate dsp_fck_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_24XX },
- { .div = 4, .val = 4, .flags = RATE_IN_24XX },
- { .div = 6, .val = 6, .flags = RATE_IN_242X },
- { .div = 8, .val = 8, .flags = RATE_IN_242X },
- { .div = 12, .val = 12, .flags = RATE_IN_242X },
- { .div = 0 },
-};
-
-static const struct clksel dsp_fck_clksel[] = {
- { .parent = &core_ck, .rates = dsp_fck_core_rates },
- { .parent = NULL }
-};
-
-static struct clk dsp_fck = {
- .name = "dsp_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
- .clkdm_name = "dsp_clkdm",
- .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
- .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
- .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
- .clksel_mask = OMAP24XX_CLKSEL_DSP_MASK,
- .clksel = dsp_fck_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-/* DSP interface clock */
-static const struct clksel_rate dsp_irate_ick_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X },
- { .div = 0 },
-};
-
-static const struct clksel dsp_irate_ick_clksel[] = {
- { .parent = &dsp_fck, .rates = dsp_irate_ick_rates },
- { .parent = NULL }
-};
-
-/* This clock does not exist as such in the TRM. */
-static struct clk dsp_irate_ick = {
- .name = "dsp_irate_ick",
- .ops = &clkops_null,
- .parent = &dsp_fck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
- .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
- .clksel_mask = OMAP24XX_CLKSEL_DSP_IF_MASK,
- .clksel = dsp_irate_ick_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-/* 2420 only */
-static struct clk dsp_ick = {
- .name = "dsp_ick", /* apparently ipi and isp */
- .ops = &clkops_omap2_dflt_wait,
- .parent = &dsp_irate_ick,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
- .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
- .enable_bit = OMAP2420_EN_DSP_IPI_SHIFT, /* for ipi */
-};
-
-/* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */
-static struct clk iva2_1_ick = {
- .name = "iva2_1_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &dsp_irate_ick,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
- .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
- .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
-};
-
-/*
- * The IVA1 is an ARM7 core on the 2420 that has nothing to do with
- * the C54x, but which is contained in the DSP powerdomain. Does not
- * exist on later OMAPs.
- */
-static struct clk iva1_ifck = {
- .name = "iva1_ifck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &core_ck,
- .flags = CONFIG_PARTICIPANT | DELAYED_APP,
- .clkdm_name = "iva1_clkdm",
- .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
- .enable_bit = OMAP2420_EN_IVA_COP_SHIFT,
- .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
- .clksel_mask = OMAP2420_CLKSEL_IVA_MASK,
- .clksel = dsp_fck_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-/* IVA1 mpu/int/i/f clocks are /2 of parent */
-static struct clk iva1_mpu_int_ifck = {
- .name = "iva1_mpu_int_ifck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &iva1_ifck,
- .clkdm_name = "iva1_clkdm",
- .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
- .enable_bit = OMAP2420_EN_IVA_MPU_SHIFT,
- .fixed_div = 2,
- .recalc = &omap2_fixed_divisor_recalc,
-};
-
-/*
- * L3 clock domain
- * L3 clocks are used for both interface and functional clocks to
- * multiple entities. Some of these clocks are completely managed
- * by hardware, and some others allow software control. Hardware
- * managed ones general are based on directly CLK_REQ signals and
- * various auto idle settings. The functional spec sets many of these
- * as 'tie-high' for their enables.
- *
- * I-CLOCKS:
- * L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
- * CAM, HS-USB.
- * F-CLOCK
- * SSI.
- *
- * GPMC memories and SDRC have timing and clock sensitive registers which
- * may very well need notification when the clock changes. Currently for low
- * operating points, these are taken care of in sleep.S.
- */
-static const struct clksel_rate core_l3_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_242X },
- { .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 6, .val = 6, .flags = RATE_IN_24XX },
- { .div = 8, .val = 8, .flags = RATE_IN_242X },
- { .div = 12, .val = 12, .flags = RATE_IN_242X },
- { .div = 16, .val = 16, .flags = RATE_IN_242X },
- { .div = 0 }
-};
-
-static const struct clksel core_l3_clksel[] = {
- { .parent = &core_ck, .rates = core_l3_core_rates },
- { .parent = NULL }
-};
-
-static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */
- .name = "core_l3_ck",
- .ops = &clkops_null,
- .parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
- .clkdm_name = "core_l3_clkdm",
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_CLKSEL_L3_MASK,
- .clksel = core_l3_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-/* usb_l4_ick */
-static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 4, .val = 4, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel usb_l4_ick_clksel[] = {
- { .parent = &core_l3_ck, .rates = usb_l4_ick_core_l3_rates },
- { .parent = NULL },
-};
-
-/* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */
-static struct clk usb_l4_ick = { /* FS-USB interface clock */
- .name = "usb_l4_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &core_l3_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP24XX_EN_USB_SHIFT,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_CLKSEL_USB_MASK,
- .clksel = usb_l4_ick_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-/*
- * L4 clock management domain
- *
- * This domain contains lots of interface clocks from the L4 interface, some
- * functional clocks. Fixed APLL functional source clocks are managed in
- * this domain.
- */
-static const struct clksel_rate l4_core_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel l4_clksel[] = {
- { .parent = &core_l3_ck, .rates = l4_core_l3_rates },
- { .parent = NULL }
-};
-
-static struct clk l4_ck = { /* used both as an ick and fck */
- .name = "l4_ck",
- .ops = &clkops_null,
- .parent = &core_l3_ck,
- .flags = DELAYED_APP,
- .clkdm_name = "core_l4_clkdm",
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_CLKSEL_L4_MASK,
- .clksel = l4_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-/*
- * SSI is in L3 management domain, its direct parent is core not l3,
- * many core power domain entities are grouped into the L3 clock
- * domain.
- * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_ICLK
- *
- * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
- */
-static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 3, .val = 3, .flags = RATE_IN_24XX },
- { .div = 4, .val = 4, .flags = RATE_IN_24XX },
- { .div = 5, .val = 5, .flags = RATE_IN_243X },
- { .div = 6, .val = 6, .flags = RATE_IN_242X },
- { .div = 8, .val = 8, .flags = RATE_IN_242X },
- { .div = 0 }
-};
-
-static const struct clksel ssi_ssr_sst_fck_clksel[] = {
- { .parent = &core_ck, .rates = ssi_ssr_sst_fck_core_rates },
- { .parent = NULL }
-};
-
-static struct clk ssi_ssr_sst_fck = {
- .name = "ssi_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &core_ck,
- .flags = DELAYED_APP,
- .clkdm_name = "core_l3_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP24XX_EN_SSI_SHIFT,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_CLKSEL_SSI_MASK,
- .clksel = ssi_ssr_sst_fck_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-/*
- * Presumably this is the same as SSI_ICLK.
- * TRM contradicts itself on what clockdomain SSI_ICLK is in
- */
-static struct clk ssi_l4_ick = {
- .name = "ssi_l4_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP24XX_EN_SSI_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-
-/*
- * GFX clock domain
- * Clocks:
- * GFX_FCLK, GFX_ICLK
- * GFX_CG1(2d), GFX_CG2(3d)
- *
- * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
- * The 2d and 3d clocks run at a hardware determined
- * divided value of fclk.
- *
- */
-/* XXX REVISIT: GFX clock is part of CONFIG_PARTICIPANT, no? doublecheck. */
-
-/* This clksel struct is shared between gfx_3d_fck and gfx_2d_fck */
-static const struct clksel gfx_fck_clksel[] = {
- { .parent = &core_l3_ck, .rates = gfx_l3_rates },
- { .parent = NULL },
-};
-
-static struct clk gfx_3d_fck = {
- .name = "gfx_3d_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &core_l3_ck,
- .clkdm_name = "gfx_clkdm",
- .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
- .enable_bit = OMAP24XX_EN_3D_SHIFT,
- .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
- .clksel_mask = OMAP_CLKSEL_GFX_MASK,
- .clksel = gfx_fck_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-static struct clk gfx_2d_fck = {
- .name = "gfx_2d_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &core_l3_ck,
- .clkdm_name = "gfx_clkdm",
- .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
- .enable_bit = OMAP24XX_EN_2D_SHIFT,
- .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
- .clksel_mask = OMAP_CLKSEL_GFX_MASK,
- .clksel = gfx_fck_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-static struct clk gfx_ick = {
- .name = "gfx_ick", /* From l3 */
- .ops = &clkops_omap2_dflt_wait,
- .parent = &core_l3_ck,
- .clkdm_name = "gfx_clkdm",
- .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
- .enable_bit = OMAP_EN_GFX_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-/*
- * Modem clock domain (2430)
- * CLOCKS:
- * MDM_OSC_CLK
- * MDM_ICLK
- * These clocks are usable in chassis mode only.
- */
-static const struct clksel_rate mdm_ick_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_243X },
- { .div = 4, .val = 4, .flags = RATE_IN_243X | DEFAULT_RATE },
- { .div = 6, .val = 6, .flags = RATE_IN_243X },
- { .div = 9, .val = 9, .flags = RATE_IN_243X },
- { .div = 0 }
-};
-
-static const struct clksel mdm_ick_clksel[] = {
- { .parent = &core_ck, .rates = mdm_ick_core_rates },
- { .parent = NULL }
-};
-
-static struct clk mdm_ick = { /* used both as a ick and fck */
- .name = "mdm_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
- .clkdm_name = "mdm_clkdm",
- .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
- .enable_bit = OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
- .clksel_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL),
- .clksel_mask = OMAP2430_CLKSEL_MDM_MASK,
- .clksel = mdm_ick_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-static struct clk mdm_osc_ck = {
- .name = "mdm_osc_ck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &osc_ck,
- .clkdm_name = "mdm_clkdm",
- .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
- .enable_bit = OMAP2430_EN_OSC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-/*
- * DSS clock domain
- * CLOCKs:
- * DSS_L4_ICLK, DSS_L3_ICLK,
- * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
- *
- * DSS is both initiator and target.
- */
-/* XXX Add RATE_NOT_VALIDATED */
-
-static const struct clksel_rate dss1_fck_sys_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel_rate dss1_fck_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_24XX },
- { .div = 4, .val = 4, .flags = RATE_IN_24XX },
- { .div = 5, .val = 5, .flags = RATE_IN_24XX },
- { .div = 6, .val = 6, .flags = RATE_IN_24XX },
- { .div = 8, .val = 8, .flags = RATE_IN_24XX },
- { .div = 9, .val = 9, .flags = RATE_IN_24XX },
- { .div = 12, .val = 12, .flags = RATE_IN_24XX },
- { .div = 16, .val = 16, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel dss1_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dss1_fck_sys_rates },
- { .parent = &core_ck, .rates = dss1_fck_core_rates },
- { .parent = NULL },
-};
-
-static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */
- .name = "dss_ick",
- .ops = &clkops_omap2_dflt,
- .parent = &l4_ck, /* really both l3 and l4 */
- .clkdm_name = "dss_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_DSS1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk dss1_fck = {
- .name = "dss1_fck",
- .ops = &clkops_omap2_dflt,
- .parent = &core_ck, /* Core or sys */
- .flags = DELAYED_APP,
- .clkdm_name = "dss_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_DSS1_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_CLKSEL_DSS1_MASK,
- .clksel = dss1_fck_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-static const struct clksel_rate dss2_fck_sys_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel_rate dss2_fck_48m_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel dss2_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dss2_fck_sys_rates },
- { .parent = &func_48m_ck, .rates = dss2_fck_48m_rates },
- { .parent = NULL }
-};
-
-static struct clk dss2_fck = { /* Alt clk used in power management */
- .name = "dss2_fck",
- .ops = &clkops_omap2_dflt,
- .parent = &sys_ck, /* fixed at sys_ck or 48MHz */
- .flags = DELAYED_APP,
- .clkdm_name = "dss_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_DSS2_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_CLKSEL_DSS2_MASK,
- .clksel = dss2_fck_clksel,
- .recalc = &followparent_recalc,
-};
-
-static struct clk dss_54m_fck = { /* Alt clk used in power management */
- .name = "dss_54m_fck", /* 54m tv clk */
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_54m_ck,
- .clkdm_name = "dss_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_TV_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-/*
- * CORE power domain ICLK & FCLK defines.
- * Many of the these can have more than one possible parent. Entries
- * here will likely have an L4 interface parent, and may have multiple
- * functional clock parents.
- */
-static const struct clksel_rate gpt_alt_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel omap24xx_gpt_clksel[] = {
- { .parent = &func_32k_ck, .rates = gpt_32k_rates },
- { .parent = &sys_ck, .rates = gpt_sys_rates },
- { .parent = &alt_ck, .rates = gpt_alt_rates },
- { .parent = NULL },
-};
-
-static struct clk gpt1_ick = {
- .name = "gpt1_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_GPT1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpt1_fck = {
- .name = "gpt1_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
- .enable_bit = OMAP24XX_EN_GPT1_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_CLKSEL_GPT1_MASK,
- .clksel = omap24xx_gpt_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-static struct clk gpt2_ick = {
- .name = "gpt2_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpt2_fck = {
- .name = "gpt2_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_GPT2_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- .clksel_mask = OMAP24XX_CLKSEL_GPT2_MASK,
- .clksel = omap24xx_gpt_clksel,
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk gpt3_ick = {
- .name = "gpt3_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT3_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpt3_fck = {
- .name = "gpt3_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_GPT3_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- .clksel_mask = OMAP24XX_CLKSEL_GPT3_MASK,
- .clksel = omap24xx_gpt_clksel,
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk gpt4_ick = {
- .name = "gpt4_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT4_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpt4_fck = {
- .name = "gpt4_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_GPT4_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- .clksel_mask = OMAP24XX_CLKSEL_GPT4_MASK,
- .clksel = omap24xx_gpt_clksel,
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk gpt5_ick = {
- .name = "gpt5_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT5_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpt5_fck = {
- .name = "gpt5_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_GPT5_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- .clksel_mask = OMAP24XX_CLKSEL_GPT5_MASK,
- .clksel = omap24xx_gpt_clksel,
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk gpt6_ick = {
- .name = "gpt6_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT6_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpt6_fck = {
- .name = "gpt6_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_GPT6_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- .clksel_mask = OMAP24XX_CLKSEL_GPT6_MASK,
- .clksel = omap24xx_gpt_clksel,
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk gpt7_ick = {
- .name = "gpt7_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT7_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpt7_fck = {
- .name = "gpt7_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_GPT7_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- .clksel_mask = OMAP24XX_CLKSEL_GPT7_MASK,
- .clksel = omap24xx_gpt_clksel,
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk gpt8_ick = {
- .name = "gpt8_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT8_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpt8_fck = {
- .name = "gpt8_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_GPT8_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- .clksel_mask = OMAP24XX_CLKSEL_GPT8_MASK,
- .clksel = omap24xx_gpt_clksel,
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk gpt9_ick = {
- .name = "gpt9_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT9_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpt9_fck = {
- .name = "gpt9_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_GPT9_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- .clksel_mask = OMAP24XX_CLKSEL_GPT9_MASK,
- .clksel = omap24xx_gpt_clksel,
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk gpt10_ick = {
- .name = "gpt10_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT10_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpt10_fck = {
- .name = "gpt10_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_GPT10_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- .clksel_mask = OMAP24XX_CLKSEL_GPT10_MASK,
- .clksel = omap24xx_gpt_clksel,
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk gpt11_ick = {
- .name = "gpt11_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT11_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpt11_fck = {
- .name = "gpt11_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_GPT11_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- .clksel_mask = OMAP24XX_CLKSEL_GPT11_MASK,
- .clksel = omap24xx_gpt_clksel,
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk gpt12_ick = {
- .name = "gpt12_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT12_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpt12_fck = {
- .name = "gpt12_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &secure_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_GPT12_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- .clksel_mask = OMAP24XX_CLKSEL_GPT12_MASK,
- .clksel = omap24xx_gpt_clksel,
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp1_ick = {
- .name = "mcbsp_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 1,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcbsp1_fck = {
- .name = "mcbsp_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 1,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcbsp2_ick = {
- .name = "mcbsp_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 2,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcbsp2_fck = {
- .name = "mcbsp_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 2,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcbsp3_ick = {
- .name = "mcbsp_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 3,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MCBSP3_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcbsp3_fck = {
- .name = "mcbsp_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 3,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MCBSP3_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcbsp4_ick = {
- .name = "mcbsp_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 4,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MCBSP4_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcbsp4_fck = {
- .name = "mcbsp_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 4,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MCBSP4_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcbsp5_ick = {
- .name = "mcbsp_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 5,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MCBSP5_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcbsp5_fck = {
- .name = "mcbsp_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 5,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MCBSP5_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcspi1_ick = {
- .name = "mcspi_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 1,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcspi1_fck = {
- .name = "mcspi_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 1,
- .parent = &func_48m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcspi2_ick = {
- .name = "mcspi_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 2,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcspi2_fck = {
- .name = "mcspi_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 2,
- .parent = &func_48m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcspi3_ick = {
- .name = "mcspi_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 3,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MCSPI3_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcspi3_fck = {
- .name = "mcspi_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 3,
- .parent = &func_48m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MCSPI3_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk uart1_ick = {
- .name = "uart1_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_UART1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk uart1_fck = {
- .name = "uart1_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_48m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_UART1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk uart2_ick = {
- .name = "uart2_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_UART2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk uart2_fck = {
- .name = "uart2_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_48m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_UART2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk uart3_ick = {
- .name = "uart3_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP24XX_EN_UART3_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk uart3_fck = {
- .name = "uart3_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_48m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP24XX_EN_UART3_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpios_ick = {
- .name = "gpios_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpios_fck = {
- .name = "gpios_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "wkup_clkdm",
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
- .enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mpu_wdt_ick = {
- .name = "mpu_wdt_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mpu_wdt_fck = {
- .name = "mpu_wdt_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "wkup_clkdm",
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
- .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk sync_32k_ick = {
- .name = "sync_32k_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_32KSYNC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk wdt1_ick = {
- .name = "wdt1_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_WDT1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk omapctrl_ick = {
- .name = "omapctrl_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_OMAPCTRL_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk icr_ick = {
- .name = "icr_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP2430_EN_ICR_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk cam_ick = {
- .name = "cam_ick",
- .ops = &clkops_omap2_dflt,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_CAM_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-/*
- * cam_fck controls both CAM_MCLK and CAM_FCLK. It should probably be
- * split into two separate clocks, since the parent clocks are different
- * and the clockdomains are also different.
- */
-static struct clk cam_fck = {
- .name = "cam_fck",
- .ops = &clkops_omap2_dflt,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l3_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_CAM_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mailboxes_ick = {
- .name = "mailboxes_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk wdt4_ick = {
- .name = "wdt4_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_WDT4_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk wdt4_fck = {
- .name = "wdt4_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_WDT4_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk wdt3_ick = {
- .name = "wdt3_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_WDT3_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk wdt3_fck = {
- .name = "wdt3_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_WDT3_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mspro_ick = {
- .name = "mspro_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MSPRO_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mspro_fck = {
- .name = "mspro_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_MSPRO_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mmc_ick = {
- .name = "mmc_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_MMC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mmc_fck = {
- .name = "mmc_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_MMC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk fac_ick = {
- .name = "fac_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_FAC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk fac_fck = {
- .name = "fac_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_12m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_FAC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk eac_ick = {
- .name = "eac_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_EAC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk eac_fck = {
- .name = "eac_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_EAC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk hdq_ick = {
- .name = "hdq_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_HDQ_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk hdq_fck = {
- .name = "hdq_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_12m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_HDQ_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk i2c2_ick = {
- .name = "i2c_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 2,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_I2C2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk i2c2_fck = {
- .name = "i2c_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 2,
- .parent = &func_12m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_I2C2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk i2chs2_fck = {
- .name = "i2c_fck",
- .ops = &clkops_omap2430_i2chs_wait,
- .id = 2,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_I2CHS2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk i2c1_ick = {
- .name = "i2c_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 1,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_I2C1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk i2c1_fck = {
- .name = "i2c_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 1,
- .parent = &func_12m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_I2C1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk i2chs1_fck = {
- .name = "i2c_fck",
- .ops = &clkops_omap2430_i2chs_wait,
- .id = 1,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_I2CHS1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpmc_fck = {
- .name = "gpmc_fck",
- .ops = &clkops_null, /* RMK: missing? */
- .parent = &core_l3_ck,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "core_l3_clkdm",
- .recalc = &followparent_recalc,
-};
-
-static struct clk sdma_fck = {
- .name = "sdma_fck",
- .ops = &clkops_null, /* RMK: missing? */
- .parent = &core_l3_ck,
- .clkdm_name = "core_l3_clkdm",
- .recalc = &followparent_recalc,
-};
-
-static struct clk sdma_ick = {
- .name = "sdma_ick",
- .ops = &clkops_null, /* RMK: missing? */
- .parent = &l4_ck,
- .clkdm_name = "core_l3_clkdm",
- .recalc = &followparent_recalc,
-};
-
-static struct clk vlynq_ick = {
- .name = "vlynq_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &core_l3_ck,
- .clkdm_name = "core_l3_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_VLYNQ_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static const struct clksel_rate vlynq_fck_96m_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_242X | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel_rate vlynq_fck_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_242X },
- { .div = 2, .val = 2, .flags = RATE_IN_242X },
- { .div = 3, .val = 3, .flags = RATE_IN_242X },
- { .div = 4, .val = 4, .flags = RATE_IN_242X },
- { .div = 6, .val = 6, .flags = RATE_IN_242X },
- { .div = 8, .val = 8, .flags = RATE_IN_242X },
- { .div = 9, .val = 9, .flags = RATE_IN_242X },
- { .div = 12, .val = 12, .flags = RATE_IN_242X },
- { .div = 16, .val = 16, .flags = RATE_IN_242X | DEFAULT_RATE },
- { .div = 18, .val = 18, .flags = RATE_IN_242X },
- { .div = 0 }
-};
-
-static const struct clksel vlynq_fck_clksel[] = {
- { .parent = &func_96m_ck, .rates = vlynq_fck_96m_rates },
- { .parent = &core_ck, .rates = vlynq_fck_core_rates },
- { .parent = NULL }
-};
-
-static struct clk vlynq_fck = {
- .name = "vlynq_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_96m_ck,
- .flags = DELAYED_APP,
- .clkdm_name = "core_l3_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_VLYNQ_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP2420_CLKSEL_VLYNQ_MASK,
- .clksel = vlynq_fck_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-static struct clk sdrc_ick = {
- .name = "sdrc_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
- .enable_bit = OMAP2430_EN_SDRC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk des_ick = {
- .name = "des_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
- .enable_bit = OMAP24XX_EN_DES_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk sha_ick = {
- .name = "sha_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
- .enable_bit = OMAP24XX_EN_SHA_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk rng_ick = {
- .name = "rng_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
- .enable_bit = OMAP24XX_EN_RNG_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk aes_ick = {
- .name = "aes_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
- .enable_bit = OMAP24XX_EN_AES_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk pka_ick = {
- .name = "pka_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
- .enable_bit = OMAP24XX_EN_PKA_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk usb_fck = {
- .name = "usb_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_48m_ck,
- .clkdm_name = "core_l3_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP24XX_EN_USB_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk usbhs_ick = {
- .name = "usbhs_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &core_l3_ck,
- .clkdm_name = "core_l3_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_USBHS_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mmchs1_ick = {
- .name = "mmchs_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MMCHS1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mmchs1_fck = {
- .name = "mmchs_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l3_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MMCHS1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mmchs2_ick = {
- .name = "mmchs_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 1,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MMCHS2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mmchs2_fck = {
- .name = "mmchs_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 1,
- .parent = &func_96m_ck,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MMCHS2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpio5_ick = {
- .name = "gpio5_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_GPIO5_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpio5_fck = {
- .name = "gpio5_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_GPIO5_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mdm_intc_ick = {
- .name = "mdm_intc_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MDM_INTC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mmchsdb1_fck = {
- .name = "mmchsdb_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MMCHSDB1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mmchsdb2_fck = {
- .name = "mmchsdb_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 1,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MMCHSDB2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-/*
- * This clock is a composite clock which does entire set changes then
- * forces a rebalance. It keys on the MPU speed, but it really could
- * be any key speed part of a set in the rate table.
- *
- * to really change a set, you need memory table sets which get changed
- * in sram, pre-notifiers & post notifiers, changing the top set, without
- * having low level display recalc's won't work... this is why dpm notifiers
- * work, isr's off, walk a list of clocks already _off_ and not messing with
- * the bus.
- *
- * This clock should have no parent. It embodies the entire upper level
- * active set. A parent will mess up some of the init also.
- */
-static struct clk virt_prcm_set = {
- .name = "virt_prcm_set",
- .ops = &clkops_null,
- .flags = DELAYED_APP,
- .parent = &mpu_ck, /* Indexed by mpu speed, no parent */
- .recalc = &omap2_table_mpu_recalc, /* sets are keyed on mpu rate */
- .set_rate = &omap2_select_table_rate,
- .round_rate = &omap2_round_to_table_rate,
-};
-
-#endif
-
git.openpandora.org / pandora-kernel.git / blobdiff