Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

[pandora-kernel.git] / arch / arm / mach-omap2 / board-zoom-peripherals.c

diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 35066b3..86c9b21 100644 (file)
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -16,6 +16,8 @@
 #include <linux/gpio.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/wl12xx.h>
 #include <linux/mmc/host.h>
 
 #include <asm/mach-types.h>
@@ -25,11 +27,16 @@
 #include <plat/common.h>
 #include <plat/usb.h>
 
+#include <mach/board-zoom.h>
+
 #include "mux.h"
 #include "hsmmc.h"
 
+#define OMAP_ZOOM_WLAN_PMENA_GPIO      (101)
+#define OMAP_ZOOM_WLAN_IRQ_GPIO                (162)
+
 /* Zoom2 has Qwerty keyboard*/
-static int board_keymap[] = {
+static uint32_t board_keymap[] = {
        KEY(0, 0, KEY_E),
        KEY(0, 1, KEY_R),
        KEY(0, 2, KEY_T),
@@ -107,6 +114,11 @@ static struct regulator_consumer_supply zoom_vmmc2_supply = {
        .supply         = "vmmc",
 };
 
+static struct regulator_consumer_supply zoom_vmmc3_supply = {
+       .supply         = "vmmc",
+       .dev_name       = "mmci-omap-hs.2",
+};
+
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data zoom_vmmc1 = {
        .constraints = {
@@ -152,6 +164,38 @@ static struct regulator_init_data zoom_vsim = {
        .consumer_supplies      = &zoom_vsim_supply,
 };
 
+static struct regulator_init_data zoom_vmmc3 = {
+       .constraints = {
+               .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+       },
+       .num_consumer_supplies  = 1,
+       .consumer_supplies = &zoom_vmmc3_supply,
+};
+
+static struct fixed_voltage_config zoom_vwlan = {
+       .supply_name            = "vwl1271",
+       .microvolts             = 1800000, /* 1.8V */
+       .gpio                   = OMAP_ZOOM_WLAN_PMENA_GPIO,
+       .startup_delay          = 70000, /* 70msec */
+       .enable_high            = 1,
+       .enabled_at_boot        = 0,
+       .init_data              = &zoom_vmmc3,
+};
+
+static struct platform_device omap_vwlan_device = {
+       .name           = "reg-fixed-voltage",
+       .id             = 1,
+       .dev = {
+               .platform_data  = &zoom_vwlan,
+       },
+};
+
+struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
+       .irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO),
+       /* ZOOM ref clock is 26 MHz */
+       .board_ref_clock = 1,
+};
+
 static struct omap2_hsmmc_info mmc[] __initdata = {
        {
                .name           = "external",
@@ -169,6 +213,14 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
                .nonremovable   = true,
                .power_saving   = true,
        },
+       {
+               .name           = "wl1271",
+               .mmc            = 3,
+               .caps           = MMC_CAP_4_BIT_DATA,
+               .gpio_wp        = -EINVAL,
+               .gpio_cd        = -EINVAL,
+               .nonremovable   = true,
+       },
        {}      /* Terminator */
 };
 
@@ -189,6 +241,11 @@ static int zoom_twl_gpio_setup(struct device *dev,
        return 0;
 }
 
+/* EXTMUTE callback function */
+void zoom2_set_hs_extmute(int mute)
+{
+       gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
+}
 
 static int zoom_batt_table[] = {
 /* 0 C*/
@@ -258,6 +315,11 @@ static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
 
 static int __init omap_i2c_init(void)
 {
+       if (machine_is_omap_zoom2()) {
+               zoom_audio_data.ramp_delay_value = 3;   /* 161 ms */
+               zoom_audio_data.hs_extmute = 1;
+               zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute;
+       }
        omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo,
                        ARRAY_SIZE(zoom_i2c_boardinfo));
        omap_register_i2c_bus(2, 400, NULL, 0);
@@ -280,7 +342,11 @@ static void enable_board_wakeup_source(void)
 
 void __init zoom_peripherals_init(void)
 {
+       if (wl12xx_set_platform_data(&omap_zoom_wlan_data))
+               pr_err("error setting wl12xx data\n");
+
        omap_i2c_init();
+       platform_device_register(&omap_vwlan_device);
        usb_musb_init(&musb_board_data);
        enable_board_wakeup_source();
        omap_serial_init();