#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/spi/spi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <plat/board.h>
#include <plat/common.h>
+#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include <mach/gpio.h>
#include <plat/gpmc.h>
#include <mach/hardware.h>
#include <plat/nand.h>
+#include <plat/mcspi.h>
+#include <plat/mux.h>
#include <plat/usb.h>
#include "mux.h"
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-#include <plat/mcspi.h>
-#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
static struct omap2_mcspi_device_config ads7846_mcspi_config = {
.keep_vref_on = 1,
};
-static struct spi_board_info overo_spi_board_info[] __initdata = {
- {
- .modalias = "ads7846",
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 1500000,
- .controller_data = &ads7846_mcspi_config,
- .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
- .platform_data = &ads7846_config,
- }
+/* fixed regulator for ads7846 */
+static struct regulator_consumer_supply ads7846_supply =
+ REGULATOR_SUPPLY("vcc", "spi1.0");
+
+static struct regulator_init_data vads7846_regulator = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &ads7846_supply,
+};
+
+static struct fixed_voltage_config vads7846 = {
+ .supply_name = "vads7846",
+ .microvolts = 3300000, /* 3.3V */
+ .gpio = -EINVAL,
+ .startup_delay = 0,
+ .init_data = &vads7846_regulator,
+};
+
+static struct platform_device vads7846_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &vads7846,
+ },
};
static void __init overo_ads7846_init(void)
return;
}
- spi_register_board_info(overo_spi_board_info,
- ARRAY_SIZE(overo_spi_board_info));
+ platform_device_register(&vads7846_device);
}
#else
static inline void __init overo_init_smsc911x(void) { return; }
#endif
+/* DSS */
+static int lcd_enabled;
+static int dvi_enabled;
+
+#define OVERO_GPIO_LCD_EN 144
+#define OVERO_GPIO_LCD_BL 145
+
+static void __init overo_display_init(void)
+{
+ if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) &&
+ (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0))
+ gpio_export(OVERO_GPIO_LCD_EN, 0);
+ else
+ printk(KERN_ERR "could not obtain gpio for "
+ "OVERO_GPIO_LCD_EN\n");
+
+ if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) &&
+ (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0))
+ gpio_export(OVERO_GPIO_LCD_BL, 0);
+ else
+ printk(KERN_ERR "could not obtain gpio for "
+ "OVERO_GPIO_LCD_BL\n");
+}
+
+static int overo_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+ if (lcd_enabled) {
+ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+ return -EINVAL;
+ }
+ dvi_enabled = 1;
+
+ return 0;
+}
+
+static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+ dvi_enabled = 0;
+}
+
+static struct panel_generic_dpi_data dvi_panel = {
+ .name = "generic",
+ .platform_enable = overo_panel_enable_dvi,
+ .platform_disable = overo_panel_disable_dvi,
+};
+
+static struct omap_dss_device overo_dvi_device = {
+ .name = "dvi",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
+ .phy.dpi.data_lines = 24,
+};
+
+static struct omap_dss_device overo_tv_device = {
+ .name = "tv",
+ .driver_name = "venc",
+ .type = OMAP_DISPLAY_TYPE_VENC,
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+static int overo_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+ if (dvi_enabled) {
+ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+ return -EINVAL;
+ }
+
+ gpio_set_value(OVERO_GPIO_LCD_EN, 1);
+ gpio_set_value(OVERO_GPIO_LCD_BL, 1);
+ lcd_enabled = 1;
+ return 0;
+}
+
+static void overo_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(OVERO_GPIO_LCD_EN, 0);
+ gpio_set_value(OVERO_GPIO_LCD_BL, 0);
+ lcd_enabled = 0;
+}
+
+static struct panel_generic_dpi_data lcd43_panel = {
+ .name = "samsung_lte430wq_f0c",
+ .platform_enable = overo_panel_enable_lcd,
+ .platform_disable = overo_panel_disable_lcd,
+};
+
+static struct omap_dss_device overo_lcd43_device = {
+ .name = "lcd43",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .driver_name = "generic_dpi_panel",
+ .data = &lcd43_panel,
+ .phy.dpi.data_lines = 24,
+};
+
+#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
+ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
+static struct omap_dss_device overo_lcd35_device = {
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .name = "lcd35",
+ .driver_name = "lgphilips_lb035q02_panel",
+ .phy.dpi.data_lines = 24,
+ .platform_enable = overo_panel_enable_lcd,
+ .platform_disable = overo_panel_disable_lcd,
+};
+#endif
+
+static struct omap_dss_device *overo_dss_devices[] = {
+ &overo_dvi_device,
+ &overo_tv_device,
+#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
+ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
+ &overo_lcd35_device,
+#endif
+ &overo_lcd43_device,
+};
+
+static struct omap_dss_board_info overo_dss_data = {
+ .num_devices = ARRAY_SIZE(overo_dss_devices),
+ .devices = overo_dss_devices,
+ .default_device = &overo_dvi_device,
+};
+
+static struct regulator_consumer_supply overo_vdda_dac_supply =
+ REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+
+static struct regulator_consumer_supply overo_vdds_dsi_supply[] = {
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
+
static struct mtd_partition overo_nand_partitions[] = {
{
.name = "xloader",
.supply = "vmmc",
};
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "overo:red:gpio21",
+ .default_trigger = "heartbeat",
+ .gpio = 21,
+ .active_low = true,
+ },
+ {
+ .name = "overo:blue:gpio22",
+ .default_trigger = "none",
+ .gpio = 22,
+ .active_low = true,
+ },
+ {
+ .name = "overo:blue:COM",
+ .default_trigger = "mmc0",
+ .gpio = -EINVAL, /* gets replaced */
+ .active_low = true,
+ },
+};
+
+static struct gpio_led_platform_data gpio_leds_pdata = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device gpio_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_leds_pdata,
+ },
+};
+
+static void __init overo_init_led(void)
+{
+ platform_device_register(&gpio_leds_device);
+}
+
+#else
+static inline void __init overo_init_led(void) { return; }
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button gpio_buttons[] = {
+ {
+ .code = BTN_0,
+ .gpio = 23,
+ .desc = "button0",
+ .wakeup = 1,
+ },
+ {
+ .code = BTN_1,
+ .gpio = 14,
+ .desc = "button1",
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data gpio_keys_pdata = {
+ .buttons = gpio_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_keys_pdata,
+ },
+};
+
+static void __init overo_init_keys(void)
+{
+ platform_device_register(&gpio_keys_device);
+}
+
+#else
+static inline void __init overo_init_keys(void) { return; }
+#endif
+
static int overo_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
overo_vmmc1_supply.dev = mmc[0].dev;
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+ /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+#endif
+
return 0;
}
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
+ .use_leds = true,
.setup = overo_twl_gpio_setup,
};
.consumer_supplies = &overo_vmmc1_supply,
};
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data overo_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &overo_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data overo_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(overo_vdds_dsi_supply),
+ .consumer_supplies = overo_vdds_dsi_supply,
+};
+
static struct twl4030_codec_audio_data overo_audio_data;
static struct twl4030_codec_data overo_codec_data = {
.audio = &overo_audio_data,
};
-/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
-
static struct twl4030_platform_data overo_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.usb = &overo_usb_data,
.codec = &overo_codec_data,
.vmmc1 = &overo_vmmc1,
+ .vdac = &overo_vdac,
+ .vpll2 = &overo_vpll2,
};
static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
return 0;
}
-static struct platform_device overo_lcd_device = {
- .name = "overo_lcd",
- .id = -1,
-};
-
-static struct omap_lcd_config overo_lcd_config __initdata = {
- .ctrl_name = "internal",
+static struct spi_board_info overo_spi_board_info[] __initdata = {
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+ {
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
+ .platform_data = &ads7846_config,
+ },
+#endif
+#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
+ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
+ {
+ .modalias = "lgphilips_lb035q02_panel-spi",
+ .bus_num = 1,
+ .chip_select = 1,
+ .max_speed_hz = 500000,
+ .mode = SPI_MODE_3,
+ },
+#endif
};
-static struct omap_board_config_kernel overo_config[] __initdata = {
- { OMAP_TAG_LCD, &overo_lcd_config },
-};
+static int __init overo_spi_init(void)
+{
+ overo_ads7846_init();
+ spi_register_board_info(overo_spi_board_info,
+ ARRAY_SIZE(overo_spi_board_info));
+ return 0;
+}
static void __init overo_init_early(void)
{
mt46h32m32lf6_sdrc_params);
}
-static struct platform_device *overo_devices[] __initdata = {
- &overo_lcd_device,
-};
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET,
static void __init overo_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_board_config = overo_config;
- omap_board_config_size = ARRAY_SIZE(overo_config);
overo_i2c_init();
- platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
+ omap_display_init(&overo_dss_data);
omap_serial_init();
overo_flash_init();
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
+ overo_spi_init();
overo_ads7846_init();
overo_init_smsc911x();
+ overo_display_init();
+ overo_init_led();
+ overo_init_keys();
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
git.openpandora.org / pandora-kernel.git / blobdiff