#include "hsmmc.h"
#include "control.h"
+#include "mux.h"
#define GPIO_HUB_POWER 1
#define GPIO_HUB_NRESET 62
static void __init omap4_panda_init_irq(void)
{
- omap2_init_common_hw(NULL, NULL);
+ omap2_init_common_infrastructure();
+ omap2_init_common_devices(NULL, NULL);
gic_init_irq();
- omap_gpio_init();
}
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_UTMI,
- .mode = MUSB_PERIPHERAL,
+ .mode = MUSB_OTG,
.power = 100,
};
+static struct twl4030_usb_data omap4_usbphy_data = {
+ .phy_init = omap4430_phy_init,
+ .phy_exit = omap4430_phy_exit,
+ .phy_power = omap4430_phy_power,
+ .phy_set_clock = omap4430_phy_set_clk,
+};
+
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
+ .gpio_cd = -EINVAL,
},
{} /* Terminator */
};
.vaux1 = &omap4_panda_vaux1,
.vaux2 = &omap4_panda_vaux2,
.vaux3 = &omap4_panda_vaux3,
+ .usb = &omap4_usbphy_data,
};
static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = {
omap_register_i2c_bus(4, 400, NULL, 0);
return 0;
}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap4_panda_init(void)
{
+ int package = OMAP_PACKAGE_CBS;
+
+ if (omap_rev() == OMAP4430_REV_ES1_0)
+ package = OMAP_PACKAGE_CBL;
+ omap4_mux_init(board_mux, package);
+
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
omap_serial_init();
/* OMAP4 Panda uses internal transceiver so register nop transceiver */
usb_nop_xceiv_register();
omap4_ehci_init();
- /* FIXME: allow multi-omap to boot until musb is updated for omap4 */
- if (!cpu_is_omap44xx())
- usb_musb_init(&musb_board_data);
+ usb_musb_init(&musb_board_data);
}
static void __init omap4_panda_map_io(void)
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
/* Maintainer: David Anders - Texas Instruments Inc */
.boot_params = 0x80000100,
+ .reserve = omap_reserve,
.map_io = omap4_panda_map_io,
.init_irq = omap4_panda_init_irq,
.init_machine = omap4_panda_init,