Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...

[pandora-kernel.git] / arch / arm / mach-omap2 / board-omap3beagle.c

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6c12760..46d814a 100644 (file)
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -41,6 +41,7 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
@@ -194,14 +195,19 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev)
                gpio_set_value(dssdev->reset_gpio, 0);
 }
 
+static struct panel_generic_dpi_data dvi_panel = {
+       .name = "generic",
+       .platform_enable = beagle_enable_dvi,
+       .platform_disable = beagle_disable_dvi,
+};
+
 static struct omap_dss_device beagle_dvi_device = {
        .type = OMAP_DISPLAY_TYPE_DPI,
        .name = "dvi",
-       .driver_name = "generic_panel",
+       .driver_name = "generic_dpi_panel",
+       .data = &dvi_panel,
        .phy.dpi.data_lines = 24,
-       .reset_gpio = 170,
-       .platform_enable = beagle_enable_dvi,
-       .platform_disable = beagle_disable_dvi,
+       .reset_gpio = -EINVAL,
 };
 
 static struct omap_dss_device beagle_tv_device = {
@@ -273,6 +279,8 @@ static struct gpio_led gpio_leds[];
 static int beagle_twl_gpio_setup(struct device *dev,
                unsigned gpio, unsigned ngpio)
 {
+       int r;
+
        if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
                mmc[0].gpio_wp = -EINVAL;
        } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
@@ -293,17 +301,63 @@ static int beagle_twl_gpio_setup(struct device *dev,
        /* REVISIT: need ehci-omap hooks for external VBUS
         * power switch and overcurrent detect
         */
+       if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) {
+               r = gpio_request(gpio + 1, "EHCI_nOC");
+               if (!r) {
+                       r = gpio_direction_input(gpio + 1);
+                       if (r)
+                               gpio_free(gpio + 1);
+               }
+               if (r)
+                       pr_err("%s: unable to configure EHCI_nOC\n", __func__);
+       }
 
-       gpio_request(gpio + 1, "EHCI_nOC");
-       gpio_direction_input(gpio + 1);
-
-       /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
+       /*
+        * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
+        * high / others active low)
+        */
        gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
-       gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+       if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
+               gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
+       else
+               gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+
+       /* DVI reset GPIO is different between beagle revisions */
+       if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
+               beagle_dvi_device.reset_gpio = 129;
+       else
+               beagle_dvi_device.reset_gpio = 170;
 
        /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
        gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
+       /*
+        * gpio + 1 on Xm controls the TFP410's enable line (active low)
+        * gpio + 2 control varies depending on the board rev as follows:
+        * P7/P8 revisions(prototype): Camera EN
+        * A2+ revisions (production): LDO (supplies DVI, serial, led blocks)
+        */
+       if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+               r = gpio_request(gpio + 1, "nDVI_PWR_EN");
+               if (!r) {
+                       r = gpio_direction_output(gpio + 1, 0);
+                       if (r)
+                               gpio_free(gpio + 1);
+               }
+               if (r)
+                       pr_err("%s: unable to configure nDVI_PWR_EN\n",
+                               __func__);
+               r = gpio_request(gpio + 2, "DVI_LDO_EN");
+               if (!r) {
+                       r = gpio_direction_output(gpio + 2, 1);
+                       if (r)
+                               gpio_free(gpio + 2);
+               }
+               if (r)
+                       pr_err("%s: unable to configure DVI_LDO_EN\n",
+                               __func__);
+       }
+
        return 0;
 }