* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/input/matrix_keypad.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
-#include <plat/keypad.h>
#include <plat/menelaus.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+
#include "mux.h"
#include "control.h"
#define H4_ETHR_GPIO_IRQ 92
-static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
-static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
-
-static const unsigned int h4_keymap[] = {
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
+static const uint32_t board_matrix_keys[] = {
KEY(0, 0, KEY_LEFT),
KEY(1, 0, KEY_RIGHT),
KEY(2, 0, KEY_A),
KEY(4, 5, KEY_ENTER),
};
+static const struct matrix_keymap_data board_keymap_data = {
+ .keymap = board_matrix_keys,
+ .keymap_size = ARRAY_SIZE(board_matrix_keys),
+};
+
+static unsigned int board_keypad_row_gpios[] = {
+ 88, 89, 124, 11, 6, 96
+};
+
+static unsigned int board_keypad_col_gpios[] = {
+ 90, 91, 100, 36, 12, 97, 98
+};
+
+static struct matrix_keypad_platform_data board_keypad_platform_data = {
+ .keymap_data = &board_keymap_data,
+ .row_gpios = board_keypad_row_gpios,
+ .num_row_gpios = ARRAY_SIZE(board_keypad_row_gpios),
+ .col_gpios = board_keypad_col_gpios,
+ .num_col_gpios = ARRAY_SIZE(board_keypad_col_gpios),
+ .active_low = 1,
+
+ .debounce_ms = 20,
+ .col_scan_delay_us = 5,
+};
+
+static struct platform_device board_keyboard = {
+ .name = "matrix-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &board_keypad_platform_data,
+ },
+};
+static void __init board_mkp_init(void)
+{
+ omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
+ omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
+ omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
+ omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
+ if (omap_has_menelaus()) {
+ omap_mux_init_signal("sdrc_a14.gpio0",
+ OMAP_PULL_ENA | OMAP_PULL_UP);
+ omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
+ omap_mux_init_signal("gpio_98", 0);
+ board_keypad_row_gpios[5] = 0;
+ board_keypad_col_gpios[2] = 15;
+ board_keypad_col_gpios[6] = 18;
+ } else {
+ omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
+ omap_mux_init_signal("gpio_100", 0);
+ omap_mux_init_signal("gpio_98", 0);
+ }
+ omap_mux_init_signal("gpio_90", 0);
+ omap_mux_init_signal("gpio_91", 0);
+ omap_mux_init_signal("gpio_36", 0);
+ omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
+ omap_mux_init_signal("gpio_97", 0);
+
+ platform_device_register(&board_keyboard);
+}
+#else
+static inline void board_mkp_init(void)
+{
+}
+#endif
+
static struct mtd_partition h4_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.resource = &h4_flash_resource,
};
-static const struct matrix_keymap_data h4_keymap_data = {
- .keymap = h4_keymap,
- .keymap_size = ARRAY_SIZE(h4_keymap),
+static struct platform_device *h4_devices[] __initdata = {
+ &h4_flash_device,
};
-static struct omap_kp_platform_data h4_kp_data = {
- .rows = 6,
- .cols = 7,
- .keymap_data = &h4_keymap_data,
- .rep = true,
- .row_gpios = row_gpios,
- .col_gpios = col_gpios,
+static struct panel_generic_dpi_data h4_panel_data = {
+ .name = "h4",
};
-static struct platform_device h4_kp_device = {
- .name = "omap-keypad",
- .id = -1,
- .dev = {
- .platform_data = &h4_kp_data,
- },
+static struct omap_dss_device h4_lcd_device = {
+ .name = "lcd",
+ .driver_name = "generic_dpi_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 16,
+ .data = &h4_panel_data,
};
-static struct platform_device h4_lcd_device = {
- .name = "lcd_h4",
- .id = -1,
+static struct omap_dss_device *h4_dss_devices[] = {
+ &h4_lcd_device,
};
-static struct platform_device *h4_devices[] __initdata = {
- &h4_flash_device,
- &h4_kp_device,
- &h4_lcd_device,
+static struct omap_dss_board_info h4_dss_data = {
+ .num_devices = ARRAY_SIZE(h4_dss_devices),
+ .devices = h4_dss_devices,
+ .default_device = &h4_lcd_device,
};
/* 2420 Sysboot setup (2430 is different) */
h4_flash_resource.end = base + SZ_64M - 1;
}
-static struct omap_lcd_config h4_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
static struct omap_usb_config h4_usb_config __initdata = {
/* S1.10 OFF -- usb "download port"
* usb0 switched to Mini-B port and isp1105 transceiver;
.hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */
};
-static struct omap_board_config_kernel h4_config[] __initdata = {
- { OMAP_TAG_LCD, &h4_lcd_config },
-};
-
static struct at24_platform_data m24c01 = {
.byte_len = SZ_1K / 8,
.page_size = 16,
{
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
- omap_board_config = h4_config;
- omap_board_config_size = ARRAY_SIZE(h4_config);
-
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
* if not needed.
*/
-#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
- omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
- omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
- omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
- omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
- if (omap_has_menelaus()) {
- omap_mux_init_signal("sdrc_a14.gpio0",
- OMAP_PULL_ENA | OMAP_PULL_UP);
- omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
- omap_mux_init_signal("gpio_98", 0);
- row_gpios[5] = 0;
- col_gpios[2] = 15;
- col_gpios[6] = 18;
- } else {
- omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
- omap_mux_init_signal("gpio_100", 0);
- omap_mux_init_signal("gpio_98", 0);
- }
- omap_mux_init_signal("gpio_90", 0);
- omap_mux_init_signal("gpio_91", 0);
- omap_mux_init_signal("gpio_36", 0);
- omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
- omap_mux_init_signal("gpio_97", 0);
-#endif
-
+ board_mkp_init();
i2c_register_board_info(1, h4_i2c_board_info,
ARRAY_SIZE(h4_i2c_board_info));
omap_serial_init();
omap_sdrc_init(NULL, NULL);
h4_init_flash();
+
+ omap_display_init(&h4_dss_data);
}
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
git.openpandora.org / pandora-kernel.git / blobdiff