#include <linux/i2c/twl.h>
#include <linux/gpio_keys.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
#include <linux/leds.h>
#include <linux/leds_pwm.h>
#include <plat/mmc.h>
#include <plat/omap4-keypad.h>
#include <video/omapdss.h>
+#include <linux/wl12xx.h>
#include "mux.h"
#include "hsmmc.h"
-#include "timer-gp.h"
#include "control.h"
#include "common-board-devices.h"
#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define GPIO_WIFI_PMENA 54
+#define GPIO_WIFI_IRQ 53
+
static const int sdp4430_keymap[] = {
KEY(0, 0, KEY_E),
KEY(0, 1, KEY_R),
KEY(7, 6, KEY_OK),
KEY(7, 7, KEY_DOWN),
};
+static struct omap_device_pad keypad_pads[] __initdata = {
+ { .name = "kpd_col1.kpd_col1",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col1.kpd_col1",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col2.kpd_col2",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col3.kpd_col3",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col4.kpd_col4",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col5.kpd_col5",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "gpmc_a23.kpd_col7",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "gpmc_a22.kpd_col6",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_row0.kpd_row0",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row1.kpd_row1",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row2.kpd_row2",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row3.kpd_row3",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row4.kpd_row4",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row5.kpd_row5",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "gpmc_a18.kpd_row6",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "gpmc_a19.kpd_row7",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+};
static struct matrix_keymap_data sdp4430_keymap_data = {
.keymap = sdp4430_keymap,
.rows = 8,
.cols = 8,
};
+
+static struct omap_board_data keypad_data = {
+ .id = 1,
+ .pads = keypad_pads,
+ .pads_cnt = ARRAY_SIZE(keypad_pads),
+};
+
static struct gpio_led sdp4430_gpio_leds[] = {
{
.name = "omap4:green:debug0",
.id = -1,
};
+static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
+ REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
+ REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
+};
+
+static struct regulator_init_data sdp4430_vbat_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sdp4430_vbat_supply),
+ .consumer_supplies = sdp4430_vbat_supply,
+};
+
+static struct fixed_voltage_config sdp4430_vbat_pdata = {
+ .supply_name = "VBAT",
+ .microvolts = 3750000,
+ .init_data = &sdp4430_vbat_data,
+ .gpio = -EINVAL,
+};
+
+static struct platform_device sdp4430_vbat = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .dev = {
+ .platform_data = &sdp4430_vbat_pdata,
+ },
+};
+
static struct platform_device *sdp4430_devices[] __initdata = {
&sdp4430_lcd_device,
&sdp4430_gpio_keys_device,
&sdp4430_leds_gpio,
&sdp4430_leds_pwm,
+ &sdp4430_vbat,
};
static struct omap_lcd_config sdp4430_lcd_config __initdata = {
{
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
-#ifdef CONFIG_OMAP_32K_TIMER
- omap2_gp_clockevent_set_gptimer(1);
-#endif
}
static struct omap_musb_board_data musb_board_data = {
.power = 100,
};
-static struct twl4030_usb_data omap4_usbphy_data = {
- .phy_init = omap4430_phy_init,
- .phy_exit = omap4430_phy_exit,
- .phy_power = omap4430_phy_power,
- .phy_set_clock = omap4430_phy_set_clk,
- .phy_suspend = omap4430_phy_suspend,
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 2,
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ .gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
+ {
+ .mmc = 5,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ .ocr_mask = MMC_VDD_165_195,
+ .nonremovable = true,
+ },
{} /* Terminator */
};
static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
- {
- .supply = "vmmc",
- .dev_name = "omap_hsmmc.1",
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
+};
+
+static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
+ .supply = "vmmc",
+ .dev_name = "omap_hsmmc.4",
+};
+
+static struct regulator_init_data sdp4430_vmmc5 = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap4_sdp4430_vmmc5_supply,
};
-static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
- {
- .supply = "vmmc",
- .dev_name = "omap_hsmmc.0",
+
+static struct fixed_voltage_config sdp4430_vwlan = {
+ .supply_name = "vwl1271",
+ .microvolts = 1800000, /* 1.8V */
+ .gpio = GPIO_WIFI_PMENA,
+ .startup_delay = 70000, /* 70msec */
+ .enable_high = 1,
+ .enabled_at_boot = 0,
+ .init_data = &sdp4430_vmmc5,
+};
+
+static struct platform_device omap_vwlan_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &sdp4430_vwlan,
},
};
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
+ .num_consumer_supplies = ARRAY_SIZE(sdp4430_vaux_supply),
.consumer_supplies = sdp4430_vaux_supply,
};
-static struct regulator_init_data sdp4430_vaux2 = {
- .constraints = {
- .min_uV = 1200000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data sdp4430_vaux3 = {
- .constraints = {
- .min_uV = 1000000,
- .max_uV = 3000000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-/* VMMC1 for MMC1 card */
-static struct regulator_init_data sdp4430_vmmc = {
- .constraints = {
- .min_uV = 1200000,
- .max_uV = 3000000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = sdp4430_vmmc_supply,
-};
-
-static struct regulator_init_data sdp4430_vpp = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 2500000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
static struct regulator_init_data sdp4430_vusim = {
.constraints = {
.min_uV = 1200000,
},
};
-static struct regulator_init_data sdp4430_vana = {
- .constraints = {
- .min_uV = 2100000,
- .max_uV = 2100000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data sdp4430_vcxio = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
+static struct twl4030_codec_data twl6040_codec = {
+ /* single-step ramp for headset and handsfree */
+ .hs_left_step = 0x0f,
+ .hs_right_step = 0x0f,
+ .hf_left_step = 0x1d,
+ .hf_right_step = 0x1d,
};
-static struct regulator_init_data sdp4430_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
+static struct twl4030_vibra_data twl6040_vibra = {
+ .vibldrv_res = 8,
+ .vibrdrv_res = 3,
+ .viblmotor_res = 10,
+ .vibrmotor_res = 10,
+ .vddvibl_uV = 0, /* fixed volt supply - VBAT */
+ .vddvibr_uV = 0, /* fixed volt supply - VBAT */
};
-static struct regulator_init_data sdp4430_vusb = {
- .constraints = {
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data sdp4430_clk32kg = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
+static struct twl4030_audio_data twl6040_audio = {
+ .codec = &twl6040_codec,
+ .vibra = &twl6040_vibra,
+ .audpwron_gpio = 127,
+ .naudint_irq = OMAP44XX_IRQ_SYS_2N,
+ .irq_base = TWL6040_CODEC_IRQ_BASE,
};
static struct twl4030_platform_data sdp4430_twldata = {
- .irq_base = TWL6030_IRQ_BASE,
- .irq_end = TWL6030_IRQ_END,
-
+ .audio = &twl6040_audio,
/* Regulators */
- .vmmc = &sdp4430_vmmc,
- .vpp = &sdp4430_vpp,
.vusim = &sdp4430_vusim,
- .vana = &sdp4430_vana,
- .vcxio = &sdp4430_vcxio,
- .vdac = &sdp4430_vdac,
- .vusb = &sdp4430_vusb,
.vaux1 = &sdp4430_vaux1,
- .vaux2 = &sdp4430_vaux2,
- .vaux3 = &sdp4430_vaux3,
- .clk32kg = &sdp4430_clk32kg,
- .usb = &omap4_usbphy_data
};
static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
};
static int __init omap4_i2c_init(void)
{
+ omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB,
+ TWL_COMMON_REGULATOR_VDAC |
+ TWL_COMMON_REGULATOR_VAUX2 |
+ TWL_COMMON_REGULATOR_VAUX3 |
+ TWL_COMMON_REGULATOR_VMMC |
+ TWL_COMMON_REGULATOR_VPP |
+ TWL_COMMON_REGULATOR_VANA |
+ TWL_COMMON_REGULATOR_VCXIO |
+ TWL_COMMON_REGULATOR_VUSB |
+ TWL_COMMON_REGULATOR_CLK32KG);
omap4_pmic_init("twl6030", &sdp4430_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
}
#endif
+static void omap4_sdp4430_wifi_mux_init(void)
+{
+ omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
+ OMAP_PIN_OFF_WAKEUPENABLE);
+ omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT);
+
+ omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+
+}
+
+static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
+ .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
+ .board_ref_clock = WL12XX_REFCLOCK_26,
+ .board_tcxo_clock = WL12XX_TCXOCLOCK_26,
+};
+
+static void omap4_sdp4430_wifi_init(void)
+{
+ omap4_sdp4430_wifi_mux_init();
+ if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data))
+ pr_err("Error setting wl12xx data\n");
+ platform_device_register(&omap_vwlan_device);
+}
+
static void __init omap_4430sdp_init(void)
{
int status;
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
board_serial_init();
+ omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
usb_musb_init(&musb_board_data);
ARRAY_SIZE(sdp4430_spi_board_info));
}
- status = omap4_keyboard_init(&sdp4430_keypad_data);
+ status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
if (status)
pr_err("Keypad initialization failed: %d\n", status);
.init_early = omap_4430sdp_init_early,
.init_irq = gic_init_irq,
.init_machine = omap_4430sdp_init,
- .timer = &omap_timer,
+ .timer = &omap4_timer,
MACHINE_END
git.openpandora.org / pandora-kernel.git / blobdiff