Pull cpuidle into release branch
[pandora-kernel.git] / arch / arm / mach-omap1 / clock.c
index f1958e8..5d9faa6 100644 (file)
@@ -20,6 +20,7 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
+#include <asm/mach-types.h>
 
 #include <asm/arch/cpu.h>
 #include <asm/arch/usb.h>
@@ -48,6 +49,15 @@ static void omap1_uart_recalc(struct clk * clk)
                clk->rate = 12000000;
 }
 
+static void omap1_sossi_recalc(struct clk *clk)
+{
+       u32 div = omap_readl(MOD_CONF_CTRL_1);
+
+       div = (div >> 17) & 0x7;
+       div++;
+       clk->rate = clk->parent->rate / div;
+}
+
 static int omap1_clk_enable_dsp_domain(struct clk *clk)
 {
        int retval;
@@ -395,6 +405,31 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
        return 0;
 }
 
+static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
+{
+       u32 l;
+       int div;
+       unsigned long p_rate;
+
+       p_rate = clk->parent->rate;
+       /* Round towards slower frequency */
+       div = (p_rate + rate - 1) / rate;
+       div--;
+       if (div < 0 || div > 7)
+               return -EINVAL;
+
+       l = omap_readl(MOD_CONF_CTRL_1);
+       l &= ~(7 << 17);
+       l |= div << 17;
+       omap_writel(l, MOD_CONF_CTRL_1);
+
+       clk->rate = p_rate / (div + 1);
+       if (unlikely(clk->flags & RATE_PROPAGATES))
+               propagate_rate(clk);
+
+       return 0;
+}
+
 static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate)
 {
        return 96000000 / calc_ext_dsor(rate);
@@ -431,8 +466,7 @@ static int omap1_clk_enable(struct clk *clk)
                        }
 
                        if (clk->flags & CLOCK_NO_IDLE_PARENT)
-                               if (!cpu_is_omap24xx())
-                                       omap1_clk_deny_idle(clk->parent);
+                               omap1_clk_deny_idle(clk->parent);
                }
 
                ret = clk->enable(clk);
@@ -453,8 +487,7 @@ static void omap1_clk_disable(struct clk *clk)
                if (likely(clk->parent)) {
                        omap1_clk_disable(clk->parent);
                        if (clk->flags & CLOCK_NO_IDLE_PARENT)
-                               if (!cpu_is_omap24xx())
-                                       omap1_clk_allow_idle(clk->parent);
+                               omap1_clk_allow_idle(clk->parent);
                }
        }
 }
@@ -470,7 +503,7 @@ static int omap1_clk_enable_generic(struct clk *clk)
        if (unlikely(clk->enable_reg == 0)) {
                printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
                       clk->name);
-               return 0;
+               return -EINVAL;
        }
 
        if (clk->flags & ENABLE_REG_32BIT) {
@@ -586,77 +619,53 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
  *-------------------------------------------------------------------------*/
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Resets some clocks that may be left on from bootloader,
- * but leaves serial clocks on. See also omap_late_clk_reset().
- */
-static inline void omap1_early_clk_reset(void)
-{
-       //omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
-}
 
-static int __init omap1_late_clk_reset(void)
+static void __init omap1_clk_disable_unused(struct clk *clk)
 {
-       /* Turn off all unused clocks */
-       struct clk *p;
        __u32 regval32;
 
-       /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
-       regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4);
-       omap_writew(regval32, SOFT_REQ_REG);
-       omap_writew(0, SOFT_REQ_REG2);
-
-       list_for_each_entry(p, &clocks, node) {
-               if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) ||
-                       p->enable_reg == 0)
-                       continue;
-
-               /* Clocks in the DSP domain need api_ck. Just assume bootloader
-                * has not enabled any DSP clocks */
-               if ((u32)p->enable_reg == DSP_IDLECT2) {
-                       printk(KERN_INFO "Skipping reset check for DSP domain "
-                              "clock \"%s\"\n", p->name);
-                       continue;
-               }
+       /* Clocks in the DSP domain need api_ck. Just assume bootloader
+        * has not enabled any DSP clocks */
+       if ((u32)clk->enable_reg == DSP_IDLECT2) {
+               printk(KERN_INFO "Skipping reset check for DSP domain "
+                      "clock \"%s\"\n", clk->name);
+               return;
+       }
 
-               /* Is the clock already disabled? */
-               if (p->flags & ENABLE_REG_32BIT) {
-                       if (p->flags & VIRTUAL_IO_ADDRESS)
-                               regval32 = __raw_readl(p->enable_reg);
-                       else
-                               regval32 = omap_readl(p->enable_reg);
-               } else {
-                       if (p->flags & VIRTUAL_IO_ADDRESS)
-                               regval32 = __raw_readw(p->enable_reg);
+       /* Is the clock already disabled? */
+       if (clk->flags & ENABLE_REG_32BIT) {
+               if (clk->flags & VIRTUAL_IO_ADDRESS)
+                       regval32 = __raw_readl(clk->enable_reg);
                        else
-                               regval32 = omap_readw(p->enable_reg);
-               }
-
-               if ((regval32 & (1 << p->enable_bit)) == 0)
-                       continue;
+                               regval32 = omap_readl(clk->enable_reg);
+       } else {
+               if (clk->flags & VIRTUAL_IO_ADDRESS)
+                       regval32 = __raw_readw(clk->enable_reg);
+               else
+                       regval32 = omap_readw(clk->enable_reg);
+       }
 
-               /* FIXME: This clock seems to be necessary but no-one
-                * has asked for its activation. */
-               if (p == &tc2_ck         // FIX: pm.c (SRAM), CCP, Camera
-                   || p == &ck_dpll1out.clk // FIX: SoSSI, SSR
-                   || p == &arm_gpio_ck // FIX: GPIO code for 1510
-                   ) {
-                       printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
-                              p->name);
-                       continue;
-               }
+       if ((regval32 & (1 << clk->enable_bit)) == 0)
+               return;
 
-               printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name);
-               p->disable(p);
-               printk(" done\n");
+       /* FIXME: This clock seems to be necessary but no-one
+        * has asked for its activation. */
+       if (clk == &tc2_ck              // FIX: pm.c (SRAM), CCP, Camera
+           || clk == &ck_dpll1out.clk  // FIX: SoSSI, SSR
+           || clk == &arm_gpio_ck      // FIX: GPIO code for 1510
+               ) {
+               printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
+                      clk->name);
+               return;
        }
 
-       return 0;
+       printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
+       clk->disable(clk);
+       printk(" done\n");
 }
-late_initcall(omap1_late_clk_reset);
 
 #else
-#define omap1_early_clk_reset()        {}
+#define omap1_clk_disable_unused       NULL
 #endif
 
 static struct clk_functions omap1_clk_functions = {
@@ -664,6 +673,7 @@ static struct clk_functions omap1_clk_functions = {
        .clk_disable            = omap1_clk_disable,
        .clk_round_rate         = omap1_clk_round_rate,
        .clk_set_rate           = omap1_clk_set_rate,
+       .clk_disable_unused     = omap1_clk_disable_unused,
 };
 
 int __init omap1_clk_init(void)
@@ -671,8 +681,21 @@ int __init omap1_clk_init(void)
        struct clk ** clkp;
        const struct omap_clock_config *info;
        int crystal_type = 0; /* Default 12 MHz */
+       u32 reg;
+
+#ifdef CONFIG_DEBUG_LL
+       /* Resets some clocks that may be left on from bootloader,
+        * but leaves serial clocks on.
+        */
+       omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+#endif
+
+       /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
+       reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
+       omap_writew(reg, SOFT_REQ_REG);
+       if (!cpu_is_omap15xx())
+               omap_writew(0, SOFT_REQ_REG2);
 
-       omap1_early_clk_reset();
        clk_init(&omap1_clk_functions);
 
        /* By default all idlect1 clocks are allowed to idle */
@@ -702,7 +725,7 @@ int __init omap1_clk_init(void)
 
        info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
        if (info != NULL) {
-               if (!cpu_is_omap1510())
+               if (!cpu_is_omap15xx())
                        crystal_type = info->system_clock_type;
        }
 
@@ -772,6 +795,12 @@ int __init omap1_clk_init(void)
        omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
 #endif
 
+       /* Amstrad Delta wants BCLK high when inactive */
+       if (machine_is_ams_delta())
+               omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
+                               (1 << SDW_MCLK_INV_BIT),
+                               ULPD_CLOCK_CTRL);
+
        /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
        /* (on 730, bit 13 must not be cleared) */
        if (cpu_is_omap730())