Merge branch 'upstream'

[pandora-kernel.git] / arch / arm / mach-omap1 / board-h2.c

diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index f4983ee..9533c36 100644 (file)
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -21,7 +21,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -33,14 +33,13 @@
 #include <asm/mach/map.h>
 
 #include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
 #include <asm/arch/usb.h>
 #include <asm/arch/common.h>
 
 extern int omap_gpio_init(void);
 
-static int __initdata h2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static struct mtd_partition h2_partitions[] = {
        /* bootloader (U-Boot, etc) in first sector */
        {
@@ -80,8 +79,7 @@ static struct flash_platform_data h2_flash_data = {
 };
 
 static struct resource h2_flash_resource = {
-       .start          = OMAP_CS2B_PHYS,
-       .end            = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1,
+       /* This is on CS3, wherever it's mapped */
        .flags          = IORESOURCE_MEM,
 };
 
@@ -126,10 +124,9 @@ static void __init h2_init_smc91x(void)
                printk("Error requesting gpio 0 for smc91x irq\n");
                return;
        }
-       omap_set_gpio_edge_ctrl(0, OMAP_GPIO_FALLING_EDGE);
 }
 
-void h2_init_irq(void)
+static void __init h2_init_irq(void)
 {
        omap_init_irq();
        omap_gpio_init();
@@ -152,32 +149,56 @@ static struct omap_usb_config h2_usb_config __initdata = {
 };
 
 static struct omap_mmc_config h2_mmc_config __initdata = {
-       .mmc_blocks             = 1,
-       .mmc1_power_pin         = -1,   /* tps65010 gpio3 */
-       .mmc1_switch_pin        = OMAP_MPUIO(1),
+       .mmc [0] = {
+               .enabled        = 1,
+               .wire4          = 1,
+               .wp_pin         = OMAP_MPUIO(3),
+               .power_pin      = -1,   /* tps65010 gpio3 */
+               .switch_pin     = OMAP_MPUIO(1),
+       },
+};
+
+static struct omap_uart_config h2_uart_config __initdata = {
+       .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config h2_lcd_config __initdata = {
+       .panel_name     = "h2",
+       .ctrl_name      = "internal",
 };
 
 static struct omap_board_config_kernel h2_config[] = {
        { OMAP_TAG_USB,           &h2_usb_config },
        { OMAP_TAG_MMC,           &h2_mmc_config },
+       { OMAP_TAG_UART,        &h2_uart_config },
+       { OMAP_TAG_LCD,         &h2_lcd_config },
 };
 
 static void __init h2_init(void)
 {
+       /* NOTE: revC boards support NAND-boot, which can put NOR on CS2B
+        * and NAND (either 16bit or 8bit) on CS3.
+        */
+       h2_flash_resource.end = h2_flash_resource.start = omap_cs3_phys();
+       h2_flash_resource.end += SZ_32M - 1;
+
+       /* MMC:  card detect and WP */
+       // omap_cfg_reg(U19_ARMIO1);            /* CD */
+       omap_cfg_reg(BALLOUT_V8_ARMIO3);        /* WP */
+
        platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
        omap_board_config = h2_config;
        omap_board_config_size = ARRAY_SIZE(h2_config);
+       omap_serial_init();
 }
 
 static void __init h2_map_io(void)
 {
        omap_map_common_io();
-       omap_serial_init(h2_serial_ports);
 }
 
 MACHINE_START(OMAP_H2, "TI-H2")
        /* Maintainer: Imre Deak <imre.deak@nokia.com> */
-       .phys_ram       = 0x10000000,
        .phys_io        = 0xfff00000,
        .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
        .boot_params    = 0x10000100,