dmaengine: imx-sdma: pass sdma firmware name via platform data

[pandora-kernel.git] / arch / arm / mach-mx5 / mm.c

diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index ff55730..1b7059f 100644 (file)
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -18,6 +18,7 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
+#include <mach/devices-common.h>
 #include <mach/iomux-v3.h>
 
 /*
@@ -69,8 +70,6 @@ void __init imx53_init_early(void)
        mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
 }
 
-int imx51_register_gpios(void);
-
 void __init mx51_init_irq(void)
 {
        unsigned long tzic_addr;
@@ -86,11 +85,8 @@ void __init mx51_init_irq(void)
                panic("unable to map TZIC interrupt controller\n");
 
        tzic_init_irq(tzic_virt);
-       imx51_register_gpios();
 }
 
-int imx53_register_gpios(void);
-
 void __init mx53_init_irq(void)
 {
        unsigned long tzic_addr;
@@ -103,5 +99,66 @@ void __init mx53_init_irq(void)
                panic("unable to map TZIC interrupt controller\n");
 
        tzic_init_irq(tzic_virt);
-       imx53_register_gpios();
+}
+
+static struct sdma_script_start_addrs imx51_sdma_script __initdata = {
+       .ap_2_ap_addr = 642,
+       .uart_2_mcu_addr = 817,
+       .mcu_2_app_addr = 747,
+       .mcu_2_shp_addr = 961,
+       .ata_2_mcu_addr = 1473,
+       .mcu_2_ata_addr = 1392,
+       .app_2_per_addr = 1033,
+       .app_2_mcu_addr = 683,
+       .shp_2_per_addr = 1251,
+       .shp_2_mcu_addr = 892,
+};
+
+static struct sdma_platform_data imx51_sdma_pdata __initdata = {
+       .sdma_version = 2,
+       .fw_name = "sdma-imx51.bin",
+       .script_addrs = &imx51_sdma_script,
+};
+
+static struct sdma_script_start_addrs imx53_sdma_script __initdata = {
+       .ap_2_ap_addr = 642,
+       .app_2_mcu_addr = 683,
+       .mcu_2_app_addr = 747,
+       .uart_2_mcu_addr = 817,
+       .shp_2_mcu_addr = 891,
+       .mcu_2_shp_addr = 960,
+       .uartsh_2_mcu_addr = 1032,
+       .spdif_2_mcu_addr = 1100,
+       .mcu_2_spdif_addr = 1134,
+       .firi_2_mcu_addr = 1193,
+       .mcu_2_firi_addr = 1290,
+};
+
+static struct sdma_platform_data imx53_sdma_pdata __initdata = {
+       .sdma_version = 2,
+       .fw_name = "sdma-imx53.bin",
+       .script_addrs = &imx53_sdma_script,
+};
+
+void __init imx51_soc_init(void)
+{
+       mxc_register_gpio(0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
+       mxc_register_gpio(1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
+       mxc_register_gpio(2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
+       mxc_register_gpio(3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
+
+       imx_add_imx_sdma(MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
+}
+
+void __init imx53_soc_init(void)
+{
+       mxc_register_gpio(0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
+       mxc_register_gpio(1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
+       mxc_register_gpio(2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
+       mxc_register_gpio(3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
+       mxc_register_gpio(4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
+       mxc_register_gpio(5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
+       mxc_register_gpio(6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
+
+       imx_add_imx_sdma(MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
 }