#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/fsl_devices.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
#include <mach/common.h>
#include <mach/hardware.h>
#define MX51_USB_PLL_DIV_24_MHZ 0x01
+#define EFIKAMX_PCBID0 IMX_GPIO_NR(3, 16)
+#define EFIKAMX_PCBID1 IMX_GPIO_NR(3, 17)
+#define EFIKAMX_PCBID2 IMX_GPIO_NR(3, 11)
+
+#define EFIKAMX_BLUE_LED IMX_GPIO_NR(3, 13)
+#define EFIKAMX_GREEN_LED IMX_GPIO_NR(3, 14)
+#define EFIKAMX_RED_LED IMX_GPIO_NR(3, 15)
+
+#define EFIKAMX_POWER_KEY IMX_GPIO_NR(2, 31)
+
+#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24)
+#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25)
+
+/* board 1.1 doesn't have same reset gpio */
+#define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2)
+#define EFIKAMX_RESET IMX_GPIO_NR(1, 4)
+
+/* the pci ids pin have pull up. they're driven low according to board id */
+#define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_PCBID2 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
+
static iomux_v3_cfg_t mx51efikamx_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
MX51_PAD_UART1_TXD__UART1_TXD,
MX51_PAD_UART1_RTS__UART1_RTS,
MX51_PAD_UART1_CTS__UART1_CTS,
+ /* board id */
+ MX51_PAD_PCBID0,
+ MX51_PAD_PCBID1,
+ MX51_PAD_PCBID2,
+
+ /* SD 1 */
+ MX51_PAD_SD1_CMD__SD1_CMD,
+ MX51_PAD_SD1_CLK__SD1_CLK,
+ MX51_PAD_SD1_DATA0__SD1_DATA0,
+ MX51_PAD_SD1_DATA1__SD1_DATA1,
+ MX51_PAD_SD1_DATA2__SD1_DATA2,
+ MX51_PAD_SD1_DATA3__SD1_DATA3,
+
+ /* SD 2 */
+ MX51_PAD_SD2_CMD__SD2_CMD,
+ MX51_PAD_SD2_CLK__SD2_CLK,
+ MX51_PAD_SD2_DATA0__SD2_DATA0,
+ MX51_PAD_SD2_DATA1__SD2_DATA1,
+ MX51_PAD_SD2_DATA2__SD2_DATA2,
+ MX51_PAD_SD2_DATA3__SD2_DATA3,
+
+ /* SD/MMC WP/CD */
+ MX51_PAD_GPIO1_0__SD1_CD,
+ MX51_PAD_GPIO1_1__SD1_WP,
+ MX51_PAD_GPIO1_7__SD2_WP,
+ MX51_PAD_GPIO1_8__SD2_CD,
+
+ /* leds */
+ MX51_PAD_CSI1_D9__GPIO3_13,
+ MX51_PAD_CSI1_VSYNC__GPIO3_14,
+ MX51_PAD_CSI1_HSYNC__GPIO3_15,
+
+ /* power key */
+ MX51_PAD_PWRKEY,
+
+ /* spi */
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
+ MX51_PAD_CSPI1_SS0__GPIO4_24,
+ MX51_PAD_CSPI1_SS1__GPIO4_25,
+ MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
+
+ /* reset */
+ MX51_PAD_DI1_PIN13__GPIO3_2,
+ MX51_PAD_GPIO1_4__GPIO1_4,
};
/* Serial ports */
void __iomem *usb_base;
void __iomem *usbother_base;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ if (!usb_base)
+ return -ENOMEM;
usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
/* Set the PHY clock to 19.2MHz */
.flags = MXC_EHCI_INTERNAL_PHY,
};
+/* PCBID2 PCBID1 PCBID0 STATE
+ 1 1 1 ER1:rev1.1
+ 1 1 0 ER2:rev1.2
+ 1 0 1 ER3:rev1.3
+ 1 0 0 ER4:rev1.4
+*/
+static void __init mx51_efikamx_board_id(void)
+{
+ int id;
+
+ /* things are taking time to settle */
+ msleep(150);
+
+ gpio_request(EFIKAMX_PCBID0, "pcbid0");
+ gpio_direction_input(EFIKAMX_PCBID0);
+ gpio_request(EFIKAMX_PCBID1, "pcbid1");
+ gpio_direction_input(EFIKAMX_PCBID1);
+ gpio_request(EFIKAMX_PCBID2, "pcbid2");
+ gpio_direction_input(EFIKAMX_PCBID2);
+
+ id = gpio_get_value(EFIKAMX_PCBID0);
+ id |= gpio_get_value(EFIKAMX_PCBID1) << 1;
+ id |= gpio_get_value(EFIKAMX_PCBID2) << 2;
+
+ switch (id) {
+ case 7:
+ system_rev = 0x11;
+ break;
+ case 6:
+ system_rev = 0x12;
+ break;
+ case 5:
+ system_rev = 0x13;
+ break;
+ case 4:
+ system_rev = 0x14;
+ break;
+ default:
+ system_rev = 0x10;
+ break;
+ }
+
+ if ((system_rev == 0x10)
+ || (system_rev == 0x12)
+ || (system_rev == 0x14)) {
+ printk(KERN_WARNING
+ "EfikaMX: Unsupported board revision 1.%u!\n",
+ system_rev & 0xf);
+ }
+}
+
+static struct gpio_led mx51_efikamx_leds[] = {
+ {
+ .name = "efikamx:green",
+ .default_trigger = "default-on",
+ .gpio = EFIKAMX_GREEN_LED,
+ },
+ {
+ .name = "efikamx:red",
+ .default_trigger = "ide-disk",
+ .gpio = EFIKAMX_RED_LED,
+ },
+ {
+ .name = "efikamx:blue",
+ .default_trigger = "mmc0",
+ .gpio = EFIKAMX_BLUE_LED,
+ },
+};
+
+static struct gpio_led_platform_data mx51_efikamx_leds_data = {
+ .leds = mx51_efikamx_leds,
+ .num_leds = ARRAY_SIZE(mx51_efikamx_leds),
+};
+
+static struct platform_device mx51_efikamx_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mx51_efikamx_leds_data,
+ },
+};
+
+static struct gpio_keys_button mx51_efikamx_powerkey[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = EFIKAMX_POWER_KEY,
+ .type = EV_PWR,
+ .desc = "Power Button (CM)",
+ .wakeup = 1,
+ .debounce_interval = 10, /* ms */
+ },
+};
+
+static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = {
+ .buttons = mx51_efikamx_powerkey,
+ .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
+};
+
+static struct mtd_partition mx51_efikamx_spi_nor_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_256K,
+ },
+ {
+ .name = "config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_64K,
+ },
+};
+
+static struct flash_platform_data mx51_efikamx_spi_flash_data = {
+ .name = "spi_flash",
+ .parts = mx51_efikamx_spi_nor_partitions,
+ .nr_parts = ARRAY_SIZE(mx51_efikamx_spi_nor_partitions),
+ .type = "sst25vf032b",
+};
+
+static struct spi_board_info mx51_efikamx_spi_board_info[] __initdata = {
+ {
+ .modalias = "m25p80",
+ .max_speed_hz = 25000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .platform_data = &mx51_efikamx_spi_flash_data,
+ .irq = -1,
+ },
+};
+
+static int mx51_efikamx_spi_cs[] = {
+ EFIKAMX_SPI_CS0,
+ EFIKAMX_SPI_CS1,
+};
+
+static const struct spi_imx_master mx51_efikamx_spi_pdata __initconst = {
+ .chipselect = mx51_efikamx_spi_cs,
+ .num_chipselect = ARRAY_SIZE(mx51_efikamx_spi_cs),
+};
+
+void mx51_efikamx_reset(void)
+{
+ if (system_rev == 0x11)
+ gpio_direction_output(EFIKAMX_RESET1_1, 0);
+ else
+ gpio_direction_output(EFIKAMX_RESET, 0);
+}
+
static void __init mxc_board_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
ARRAY_SIZE(mx51efikamx_pads));
+ mx51_efikamx_board_id();
mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
mxc_init_imx_uart();
+ imx51_add_sdhci_esdhc_imx(0, NULL);
+
+ /* on < 1.2 boards both SD controllers are used */
+ if (system_rev < 0x12) {
+ imx51_add_sdhci_esdhc_imx(1, NULL);
+ mx51_efikamx_leds[2].default_trigger = "mmc1";
+ }
+
+ platform_device_register(&mx51_efikamx_leds_device);
+ imx51_add_gpio_keys(&mx51_efikamx_powerkey_data);
+
+ spi_register_board_info(mx51_efikamx_spi_board_info,
+ ARRAY_SIZE(mx51_efikamx_spi_board_info));
+ imx51_add_ecspi(0, &mx51_efikamx_spi_pdata);
+
+ if (system_rev == 0x11) {
+ gpio_request(EFIKAMX_RESET1_1, "reset");
+ gpio_direction_output(EFIKAMX_RESET1_1, 1);
+ } else {
+ gpio_request(EFIKAMX_RESET, "reset");
+ gpio_direction_output(EFIKAMX_RESET, 1);
+ }
}
static void __init mx51_efikamx_timer_init(void)
git.openpandora.org / pandora-kernel.git / blobdiff