Merge branch 'for-linus' of git://android.git.kernel.org/kernel/tegra

[pandora-kernel.git] / arch / arm / mach-mx5 / board-mx51_babbage.c

diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 1d231e8..b2ecd19 100644 (file)
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -161,23 +161,10 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
 };
 
 /* Serial ports */
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
 static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
 
-static inline void mxc_init_imx_uart(void)
-{
-       imx51_add_imx_uart(0, &uart_pdata);
-       imx51_add_imx_uart(1, &uart_pdata);
-       imx51_add_imx_uart(2, &uart_pdata);
-}
-#else /* !SERIAL_IMX */
-static inline void mxc_init_imx_uart(void)
-{
-}
-#endif /* SERIAL_IMX */
-
 static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
        .bitrate = 100000,
 };
@@ -272,7 +259,10 @@ static int initialize_otg_port(struct platform_device *pdev)
        v |= MX51_USB_PLL_DIV_19_2_MHZ;
        __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
        iounmap(usb_base);
-       return 0;
+
+       mdelay(10);
+
+       return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
 }
 
 static int initialize_usbh1_port(struct platform_device *pdev)
@@ -290,13 +280,16 @@ static int initialize_usbh1_port(struct platform_device *pdev)
        v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
        __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
        iounmap(usb_base);
-       return 0;
+
+       mdelay(10);
+
+       return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
+                       MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
 static struct mxc_usbh_platform_data dr_utmi_config = {
        .init           = initialize_otg_port,
        .portsc = MXC_EHCI_UTMI_16BIT,
-       .flags  = MXC_EHCI_INTERNAL_PHY,
 };
 
 static struct fsl_usb2_platform_data usb_pdata = {
@@ -307,7 +300,6 @@ static struct fsl_usb2_platform_data usb_pdata = {
 static struct mxc_usbh_platform_data usbh1_config = {
        .init           = initialize_usbh1_port,
        .portsc = MXC_EHCI_MODE_ULPI,
-       .flags  = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
 };
 
 static int otg_mode_host;
@@ -349,7 +341,7 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init mx51_babbage_init(void)
 {
        iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
        iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
@@ -360,7 +352,11 @@ static void __init mxc_board_init(void)
 #endif
        mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
                                        ARRAY_SIZE(mx51babbage_pads));
-       mxc_init_imx_uart();
+
+       imx51_add_imx_uart(0, &uart_pdata);
+       imx51_add_imx_uart(1, &uart_pdata);
+       imx51_add_imx_uart(2, &uart_pdata);
+
        babbage_fec_reset();
        imx51_add_fec(NULL);
 
@@ -399,15 +395,16 @@ static void __init mx51_babbage_timer_init(void)
        mx51_clocks_init(32768, 24000000, 22579200, 0);
 }
 
-static struct sys_timer mxc_timer = {
-       .init   = mx51_babbage_timer_init,
+static struct sys_timer mx51_babbage_timer = {
+       .init = mx51_babbage_timer_init,
 };
 
 MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
        /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
        .boot_params = MX51_PHYS_OFFSET + 0x100,
        .map_io = mx51_map_io,
+       .init_early = imx51_init_early,
        .init_irq = mx51_init_irq,
-       .init_machine = mxc_board_init,
-       .timer = &mxc_timer,
+       .timer = &mx51_babbage_timer,
+       .init_machine = mx51_babbage_init,
 MACHINE_END