Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...

[pandora-kernel.git] / arch / arm / mach-mx5 / board-cpuimx51.c

diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index f8652ef..d0296a9 100644 (file)
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -60,7 +60,6 @@
 #define        MX51_USB_PLL_DIV_19_2_MHZ       0x01
 #define        MX51_USB_PLL_DIV_24_MHZ         0x02
 
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 static struct plat_serial8250_port serial_platform_data[] = {
        {
                .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
@@ -105,12 +104,9 @@ static struct platform_device serial_device = {
                .platform_data = serial_platform_data,
        },
 };
-#endif
 
 static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
        &serial_device,
-#endif
 };
 
 static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
@@ -188,7 +184,10 @@ static int initialize_otg_port(struct platform_device *pdev)
        v |= MX51_USB_PLL_DIV_19_2_MHZ;
        __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
        iounmap(usb_base);
-       return 0;
+
+       mdelay(10);
+
+       return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
 }
 
 static int initialize_usbh1_port(struct platform_device *pdev)
@@ -206,13 +205,16 @@ static int initialize_usbh1_port(struct platform_device *pdev)
        v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
        __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
        iounmap(usb_base);
-       return 0;
+
+       mdelay(10);
+
+       return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
+                       MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
 static struct mxc_usbh_platform_data dr_utmi_config = {
        .init           = initialize_otg_port,
        .portsc = MXC_EHCI_UTMI_16BIT,
-       .flags  = MXC_EHCI_INTERNAL_PHY,
 };
 
 static struct fsl_usb2_platform_data usb_pdata = {
@@ -223,7 +225,6 @@ static struct fsl_usb2_platform_data usb_pdata = {
 static struct mxc_usbh_platform_data usbh1_config = {
        .init           = initialize_usbh1_port,
        .portsc = MXC_EHCI_MODE_ULPI,
-       .flags  = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
 };
 
 static int otg_mode_host;
@@ -298,7 +299,8 @@ MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
        /* Maintainer: Eric Bénard <eric@eukrea.com> */
        .boot_params = MX51_PHYS_OFFSET + 0x100,
        .map_io = mx51_map_io,
+       .init_early = imx51_init_early,
        .init_irq = mx51_init_irq,
-       .init_machine = eukrea_cpuimx51_init,
        .timer = &mxc_timer,
+       .init_machine = eukrea_cpuimx51_init,
 MACHINE_END