Merge branch 'old_next' into next

[pandora-kernel.git] / arch / arm / mach-mx3 / mach-pcm043.c

diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index bcf83fc..b3ecfb2 100644 (file)
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -115,7 +115,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
 
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
 static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
        .bitrate = 50000,
 };
@@ -134,7 +133,6 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
                I2C_BOARD_INFO("pcf8563", 0x51),
        }
 };
-#endif
 
 static struct platform_device *devices[] __initdata = {
        &pcm043_flash,
@@ -221,9 +219,9 @@ static iomux_v3_cfg_t pcm043_pads[] = {
        MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 };
 
-#define AC97_GPIO_TXFS (1 * 32 + 31)
-#define AC97_GPIO_TXD  (1 * 32 + 28)
-#define AC97_GPIO_RESET        (1 * 32 + 0)
+#define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31)
+#define AC97_GPIO_TXD  IMX_GPIO_NR(2, 28)
+#define AC97_GPIO_RESET        IMX_GPIO_NR(2, 0)
 
 static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 {
@@ -307,18 +305,26 @@ pcm037_nand_board_info __initconst = {
        .hw_ecc = 1,
 };
 
-#if defined(CONFIG_USB_ULPI)
+static int pcm043_otg_init(struct platform_device *pdev)
+{
+       return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+       .init   = pcm043_otg_init,
        .portsc = MXC_EHCI_MODE_UTMI,
-       .flags  = MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
+static int pcm043_usbh1_init(struct platform_device *pdev)
+{
+       return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+                       MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
+}
+
 static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
+       .init   = pcm043_usbh1_init,
        .portsc = MXC_EHCI_MODE_SERIAL,
-       .flags  = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
-                 MXC_EHCI_IPPUE_DOWN,
 };
-#endif
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
        .operating_mode = FSL_USB2_DR_DEVICE,
@@ -343,7 +349,7 @@ __setup("otg_mode=", pcm043_otg_mode);
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init pcm043_init(void)
 {
        mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
 
@@ -369,26 +375,22 @@ static void __init mxc_board_init(void)
 
        imx35_add_imx_uart1(&uart_pdata);
 
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
        i2c_register_board_info(0, pcm043_i2c_devices,
                        ARRAY_SIZE(pcm043_i2c_devices));
 
        imx35_add_imx_i2c0(&pcm043_i2c0_data);
-#endif
 
        mxc_register_device(&mx3_ipu, &mx3_ipu_data);
        mxc_register_device(&mx3_fb, &mx3fb_pdata);
 
-#if defined(CONFIG_USB_ULPI)
        if (otg_mode_host) {
-               otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-                               ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-               imx35_add_mxc_ehci_otg(&otg_pdata);
+               otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+                               ULPI_OTG_DRVVBUS_EXT);
+               if (otg_pdata.otg)
+                       imx35_add_mxc_ehci_otg(&otg_pdata);
        }
-
        imx35_add_mxc_ehci_hs(&usbh1_pdata);
-#endif
+
        if (!otg_mode_host)
                imx35_add_fsl_usb2_udc(&otg_device_pdata);
 
@@ -407,10 +409,10 @@ struct sys_timer pcm043_timer = {
 
 MACHINE_START(PCM043, "Phytec Phycore pcm043")
        /* Maintainer: Pengutronix */
-       .boot_params    = MX3x_PHYS_OFFSET + 0x100,
-       .map_io         = mx35_map_io,
-       .init_irq       = mx35_init_irq,
-       .init_machine   = mxc_board_init,
-       .timer          = &pcm043_timer,
+       .boot_params = MX3x_PHYS_OFFSET + 0x100,
+       .map_io = mx35_map_io,
+       .init_early = imx35_init_early,
+       .init_irq = mx35_init_irq,
+       .timer = &pcm043_timer,
+       .init_machine = pcm043_init,
 MACHINE_END
-