#include <linux/irq.h>
#include <linux/fsl_devices.h>
#include <linux/can/platform/sja1000.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/gfp.h>
#include <media/soc_camera.h>
#include <mach/mx3_camera.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
#include "devices.h"
#include "pcm037.h"
MX31_PIN_CSI_VSYNC__CSI_VSYNC,
/* GPIO */
IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
-};
-
-static struct physmap_flash_data pcm037_flash_data = {
- .width = 2,
-};
-
-static struct resource pcm037_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static int usbotg_pins[] = {
+ /* OTG */
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
MX31_PIN_USBOTG_DIR__USBOTG_DIR,
MX31_PIN_USBOTG_NXT__USBOTG_NXT,
MX31_PIN_USBOTG_STP__USBOTG_STP,
+ /* USB host 2 */
+ IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
};
-/* USB OTG HS port */
-static int __init gpio_usbotg_hs_activate(void)
-{
- int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
- ARRAY_SIZE(usbotg_pins), "usbotg");
-
- if (ret < 0) {
- printk(KERN_ERR "Cannot set up OTG pins\n");
- return ret;
- }
-
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-
- return 0;
-}
+static struct physmap_flash_data pcm037_flash_data = {
+ .width = 2,
+};
-/* OTG config */
-static struct fsl_usb2_platform_data usb_pdata = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
+static struct resource pcm037_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
};
static struct platform_device pcm037_flash = {
.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
};
+static struct mxc_usbh_platform_data otg_pdata = {
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init pcm037_otg_mode(char *options)
+{
+ if (!strcmp(options, "host"))
+ otg_mode_host = 1;
+ else if (!strcmp(options, "device"))
+ otg_mode_host = 0;
+ else
+ pr_info("otg_mode neither \"host\" nor \"device\". "
+ "Defaulting to device\n");
+ return 0;
+}
+__setup("otg_mode=", pcm037_otg_mode);
+
/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
{
int ret;
+ u32 tmp;
+
+ mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
"pcm037");
+#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
+ | PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+ mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
+ mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */
+ mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */
+ mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */
+ mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */
+ mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */
+ mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */
+
if (pcm037_variant() == PCM037_EET)
mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
- if (!gpio_usbotg_hs_activate())
- mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
/* CSI */
/* Camera power: default - off */
mxc_register_device(&mx3_camera, &camera_pdata);
platform_device_register(&pcm970_sja1000);
+
+#if defined(CONFIG_USB_ULPI)
+ if (otg_mode_host) {
+ otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_otg_host, &otg_pdata);
+ }
+
+ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+ if (!otg_mode_host)
+ mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
}
static void __init pcm037_timer_init(void)
git.openpandora.org / pandora-kernel.git / blobdiff