Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable

[pandora-kernel.git] / arch / arm / mach-mx3 / mach-mx35_3ds.c

diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index b1963f2..ff5fe23 100644 (file)
--- a/arch/arm/mach-mx3/mach-mx35_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -118,24 +118,42 @@ static iomux_v3_cfg_t mx35pdk_pads[] = {
        MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
        MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
        MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+       /* I2C1 */
+       MX35_PAD_I2C1_CLK__I2C1_SCL,
+       MX35_PAD_I2C1_DAT__I2C1_SDA,
 };
 
+static int mx35_3ds_otg_init(struct platform_device *pdev)
+{
+       return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
+}
+
 /* OTG config */
 static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
        .operating_mode = FSL_USB2_DR_DEVICE,
        .phy_mode       = FSL_USB2_PHY_UTMI_WIDE,
+       .workaround     = FLS_USB2_WORKAROUND_ENGCM09152,
+/*
+ * ENGCM09152 also requires a hardware change.
+ * Please check the MX35 Chip Errata document for details.
+ */
 };
 
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+       .init   = mx35_3ds_otg_init,
        .portsc = MXC_EHCI_MODE_UTMI,
-       .flags  = MXC_EHCI_INTERNAL_PHY,
 };
 
+static int mx35_3ds_usbh_init(struct platform_device *pdev)
+{
+       return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+                         MXC_EHCI_INTERNAL_PHY);
+}
+
 /* USB HOST config */
 static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
+       .init           = mx35_3ds_usbh_init,
        .portsc         = MXC_EHCI_MODE_SERIAL,
-       .flags          = MXC_EHCI_INTERFACE_SINGLE_UNI |
-                         MXC_EHCI_INTERNAL_PHY,
 };
 
 static int otg_mode_host;
@@ -153,10 +171,14 @@ static int __init mx35_3ds_otg_mode(char *options)
 }
 __setup("otg_mode=", mx35_3ds_otg_mode);
 
+static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
+       .bitrate = 100000,
+};
+
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init mx35_3ds_init(void)
 {
        mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
 
@@ -180,6 +202,7 @@ static void __init mxc_board_init(void)
        if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
                pr_warn("Init of the debugboard failed, all "
                                "devices on the debugboard are unusable.\n");
+       imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
 }
 
 static void __init mx35pdk_timer_init(void)
@@ -193,9 +216,10 @@ struct sys_timer mx35pdk_timer = {
 
 MACHINE_START(MX35_3DS, "Freescale MX35PDK")
        /* Maintainer: Freescale Semiconductor, Inc */
-       .boot_params    = MX3x_PHYS_OFFSET + 0x100,
-       .map_io         = mx35_map_io,
-       .init_irq       = mx35_init_irq,
-       .init_machine   = mxc_board_init,
-       .timer          = &mx35pdk_timer,
+       .boot_params = MX3x_PHYS_OFFSET + 0x100,
+       .map_io = mx35_map_io,
+       .init_early = imx35_init_early,
+       .init_irq = mx35_init_irq,
+       .timer = &mx35pdk_timer,
+       .init_machine = mx35_3ds_init,
 MACHINE_END