xfs: obey minleft values during extent allocation correctly

[pandora-kernel.git] / arch / arm / mach-mx3 / mach-mx31lilly.c

diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 2c59548..ed95745 100644 (file)
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
@@ -110,55 +111,9 @@ static struct platform_device physmap_flash_device = {
 
 /* USB */
 
-#if defined(CONFIG_USB_ULPI)
-
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
                        PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
-static int usbotg_init(struct platform_device *pdev)
-{
-       unsigned int pins[] = {
-               MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-               MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-               MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-               MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-               MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-               MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-               MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-               MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-               MX31_PIN_USBOTG_CLK__USBOTG_CLK,
-               MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-               MX31_PIN_USBOTG_NXT__USBOTG_NXT,
-               MX31_PIN_USBOTG_STP__USBOTG_STP,
-       };
-
-       mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB OTG");
-
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-       mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-       mxc_iomux_set_gpr(MUX_PGP_USB_4WIRE, true);
-       mxc_iomux_set_gpr(MUX_PGP_USB_COMMON, true);
-
-       /* chip select */
-       mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE2, IOMUX_CONFIG_GPIO),
-                               "USBOTG_CS");
-       gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), "USBH1 CS");
-       gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), 0);
-
-       return 0;
-}
-
 static int usbh1_init(struct platform_device *pdev)
 {
        int pins[] = {
@@ -183,7 +138,10 @@ static int usbh1_init(struct platform_device *pdev)
 
        mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
 
-       return 0;
+       mdelay(10);
+
+       return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+                       MXC_EHCI_INTERFACE_SINGLE_UNI);
 }
 
 static int usbh2_init(struct platform_device *pdev)
@@ -220,41 +178,30 @@ static int usbh2_init(struct platform_device *pdev)
        gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
        gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
 
-       return 0;
-}
+       mdelay(10);
 
-static struct mxc_usbh_platform_data usbotg_pdata = {
-       .init   = usbotg_init,
-       .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-       .flags  = MXC_EHCI_POWER_PINS_ENABLED,
-};
+       return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
 
 static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
        .init   = usbh1_init,
        .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-       .flags  = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
 };
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
        .init   = usbh2_init,
        .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-       .flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static void lilly1131_usb_init(void)
 {
-       usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-                               ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-       usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-                               ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
        imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-       imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-}
 
-#else
-static inline void lilly1131_usb_init(void) {}
-#endif /* CONFIG_USB_ULPI */
+       usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+                       ULPI_OTG_DRVVBUS_EXT);
+       if (usbh2_pdata.otg)
+               imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+}
 
 /* SPI */
 
@@ -274,8 +221,8 @@ static const struct spi_imx_master spi1_pdata __initconst = {
        .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
 };
 
-static struct mc13783_platform_data mc13783_pdata __initdata = {
-       .flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN,
+static struct mc13xxx_platform_data mc13783_pdata __initdata = {
+       .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
 };
 
 static struct spi_board_info mc13783_dev __initdata = {
@@ -347,10 +294,10 @@ static struct sys_timer mx31lilly_timer = {
 };
 
 MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-       .boot_params    = MX3x_PHYS_OFFSET + 0x100,
-       .map_io         = mx31_map_io,
-       .init_irq       = mx31_init_irq,
-       .init_machine   = mx31lilly_board_init,
-       .timer          = &mx31lilly_timer,
+       .boot_params = MX3x_PHYS_OFFSET + 0x100,
+       .map_io = mx31_map_io,
+       .init_early = imx31_init_early,
+       .init_irq = mx31_init_irq,
+       .timer = &mx31lilly_timer,
+       .init_machine = mx31lilly_board_init,
 MACHINE_END
-