Merge git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client

[pandora-kernel.git] / arch / arm / mach-msm / board-msm7x30.c

diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index 25db8fd..b7a8496 100644 (file)
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -23,6 +23,7 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/usb/msm_hsusb.h>
+#include <linux/clkdev.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -36,6 +37,7 @@
 
 #include <mach/vreg.h>
 #include "devices.h"
+#include "gpiomux.h"
 #include "proc_comm.h"
 
 extern struct sys_timer msm_timer;
@@ -52,6 +54,27 @@ static struct msm_otg_platform_data msm_otg_pdata = {
        .otg_control            = OTG_PHY_CONTROL,
 };
 
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+       [49] = { /* UART2 RFR */
+               .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+                            GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+       },
+       [50] = { /* UART2 CTS */
+               .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+                            GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+       },
+       [51] = { /* UART2 RX */
+               .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+                            GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+       },
+       [52] = { /* UART2 TX */
+               .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+                            GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+       },
+#endif
+};
+
 static struct platform_device *devices[] __initdata = {
 #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
         &msm_device_uart2,
@@ -83,8 +106,6 @@ static void __init msm7x30_map_io(void)
 }
 
 MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
-#ifdef CONFIG_MSM_DEBUG_UART
-#endif
        .boot_params = PLAT_PHYS_OFFSET + 0x100,
        .map_io = msm7x30_map_io,
        .init_irq = msm7x30_init_irq,
@@ -93,8 +114,6 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
 MACHINE_END
 
 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
-#ifdef CONFIG_MSM_DEBUG_UART
-#endif
        .boot_params = PLAT_PHYS_OFFSET + 0x100,
        .map_io = msm7x30_map_io,
        .init_irq = msm7x30_init_irq,
@@ -103,8 +122,6 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
 MACHINE_END
 
 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
-#ifdef CONFIG_MSM_DEBUG_UART
-#endif
        .boot_params = PLAT_PHYS_OFFSET + 0x100,
        .map_io = msm7x30_map_io,
        .init_irq = msm7x30_init_irq,