git.openpandora.org / pandora-kernel.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm
[pandora-kernel.git] / arch / arm / mach-kirkwood / netspace_v2-setup.c
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index d26bf32..5e28644 100644 (file)
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -24,56 +24,19 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 #include <mach/kirkwood.h>
 #include <mach/leds-ns2.h>
-#include <plat/time.h>
 #include "common.h"
 #include "mpp.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition netspace_v2_flash_parts[] = {
-       {
-               .name = "u-boot",
-               .size = MTDPART_SIZ_FULL,
-               .offset = 0,
-               .mask_flags = MTD_WRITEABLE, /* force read-only */
-       },
-};
-
-static const struct flash_platform_data netspace_v2_flash = {
-       .type           = "mx25l4005a",
-       .name           = "spi_flash",
-       .parts          = netspace_v2_flash_parts,
-       .nr_parts       = ARRAY_SIZE(netspace_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = {
-       {
-               .modalias       = "m25p80",
-               .platform_data  = &netspace_v2_flash,
-               .irq            = -1,
-               .max_speed_hz   = 20000000,
-               .bus_num        = 0,
-               .chip_select    = 0,
-       },
-};
+#include "lacie_v2-common.h"
 
 /*****************************************************************************
  * Ethernet
@@ -83,27 +46,6 @@ static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
 };
 
-/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
-       .byte_len       = SZ_4K / 8,
-       .page_size      = 16,
-};
-
-/*
- * i2c addr | chip         | description
- * 0x50     | HT24LC04     | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata netspace_v2_i2c_info[] = {
-       {
-               I2C_BOARD_INFO("24c04", 0x50),
-               .platform_data  = &at24c04,
-       }
-};
-
 /*****************************************************************************
  * SATA
  ****************************************************************************/
@@ -112,35 +54,6 @@ static struct mv_sata_platform_data netspace_v2_sata_data = {
        .n_ports        = 2,
 };
 
-#define NETSPACE_V2_GPIO_SATA0_POWER   16
-#define NETSPACE_V2_GPIO_SATA1_POWER   17
-
-static void __init netspace_v2_sata_power_init(void)
-{
-       int err;
-
-       err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power");
-       if (err == 0) {
-               err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1);
-               if (err)
-                       gpio_free(NETSPACE_V2_GPIO_SATA0_POWER);
-       }
-       if (err)
-               pr_err("netspace_v2: failed to setup SATA0 power\n");
-
-       if (machine_is_netspace_max_v2()) {
-               err = gpio_request(NETSPACE_V2_GPIO_SATA1_POWER, "SATA1 power");
-               if (err == 0) {
-                       err = gpio_direction_output(
-                                       NETSPACE_V2_GPIO_SATA1_POWER, 1);
-                       if (err)
-                               gpio_free(NETSPACE_V2_GPIO_SATA1_POWER);
-               }
-               if (err)
-                       pr_err("netspace_v2: failed to setup SATA1 power\n");
-       }
-}
-
 /*****************************************************************************
  * GPIO keys
  ****************************************************************************/
@@ -223,20 +136,6 @@ static struct platform_device netspace_v2_leds = {
        },
 };
 
-/*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void netspace_v2_timer_init(void)
-{
-       kirkwood_tclk = 166666667;
-       orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer netspace_v2_timer = {
-       .init = netspace_v2_timer_init,
-};
-
 /*****************************************************************************
  * General Setup
  ****************************************************************************/
@@ -291,18 +190,17 @@ static void __init netspace_v2_init(void)
        kirkwood_init();
        kirkwood_mpp_conf(netspace_v2_mpp_config);
 
-       netspace_v2_sata_power_init();
+       if (machine_is_netspace_max_v2())
+               lacie_v2_hdd_power_init(2);
+       else
+               lacie_v2_hdd_power_init(1);
 
        kirkwood_ehci_init();
        kirkwood_ge00_init(&netspace_v2_ge00_data);
        kirkwood_sata_init(&netspace_v2_sata_data);
        kirkwood_uart0_init();
-       spi_register_board_info(netspace_v2_spi_slave_info,
-                               ARRAY_SIZE(netspace_v2_spi_slave_info));
-       kirkwood_spi_init();
-       kirkwood_i2c_init();
-       i2c_register_board_info(0, netspace_v2_i2c_info,
-                               ARRAY_SIZE(netspace_v2_i2c_info));
+       lacie_v2_register_flash();
+       lacie_v2_register_i2c_devices();
 
        platform_device_register(&netspace_v2_leds);
        platform_device_register(&netspace_v2_gpio_leds);
@@ -317,36 +215,30 @@ static void __init netspace_v2_init(void)
 
 #ifdef CONFIG_MACH_NETSPACE_V2
 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
-       .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
-       .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
        .boot_params    = 0x00000100,
        .init_machine   = netspace_v2_init,
        .map_io         = kirkwood_map_io,
        .init_irq       = kirkwood_init_irq,
-       .timer          = &netspace_v2_timer,
+       .timer          = &lacie_v2_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_INETSPACE_V2
 MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
-       .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
-       .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
        .boot_params    = 0x00000100,
        .init_machine   = netspace_v2_init,
        .map_io         = kirkwood_map_io,
        .init_irq       = kirkwood_init_irq,
-       .timer          = &netspace_v2_timer,
+       .timer          = &lacie_v2_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_NETSPACE_MAX_V2
 MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
-       .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
-       .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
        .boot_params    = 0x00000100,
        .init_machine   = netspace_v2_init,
        .map_io         = kirkwood_map_io,
        .init_irq       = kirkwood_init_irq,
-       .timer          = &netspace_v2_timer,
+       .timer          = &lacie_v2_timer,
 MACHINE_END
 #endif
Pandora Kernel Repository