Merge branch 'viafb-next' of git://github.com/schandinat/linux-2.6 into fbdev-fixes...

[pandora-kernel.git] / arch / arm / mach-imx / mach-pca100.c

diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index cccc0a0..63e1825 100644 (file)
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -187,7 +187,6 @@ static struct i2c_board_info pca100_i2c_devices[] = {
        }
 };
 
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static struct spi_eeprom at25320 = {
        .name           = "at25320an",
        .byte_len       = 4096,
@@ -211,7 +210,6 @@ static const struct spi_imx_master pca100_spi0_data __initconst = {
        .chipselect     = pca100_spi_cs,
        .num_chipselect = ARRAY_SIZE(pca100_spi_cs),
 };
-#endif
 
 static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
 {
@@ -269,31 +267,33 @@ static const struct imxmmc_platform_data sdhc_pdata __initconst = {
        .exit = pca100_sdhc2_exit,
 };
 
-#if defined(CONFIG_USB_ULPI)
 static int otg_phy_init(struct platform_device *pdev)
 {
        gpio_set_value(OTG_PHY_CS_GPIO, 0);
-       return 0;
+
+       mdelay(10);
+
+       return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
 }
 
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
        .init   = otg_phy_init,
        .portsc = MXC_EHCI_MODE_ULPI,
-       .flags  = MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
 static int usbh2_phy_init(struct platform_device *pdev)
 {
        gpio_set_value(USBH2_PHY_CS_GPIO, 0);
-       return 0;
+
+       mdelay(10);
+
+       return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
 }
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
        .init   = usbh2_phy_init,
        .portsc = MXC_EHCI_MODE_ULPI,
-       .flags  = MXC_EHCI_INTERFACE_DIFF_UNI,
 };
-#endif
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
        .operating_mode = FSL_USB2_DR_DEVICE,
@@ -389,36 +389,33 @@ static void __init pca100_init(void)
 
        imx27_add_imx_i2c(1, &pca100_i2c1_data);
 
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
        mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
        mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
        spi_register_board_info(pca100_spi_board_info,
                                ARRAY_SIZE(pca100_spi_board_info));
        imx27_add_spi_imx0(&pca100_spi0_data);
-#endif
 
        gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
        gpio_direction_output(OTG_PHY_CS_GPIO, 1);
        gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
        gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
 
-#if defined(CONFIG_USB_ULPI)
        if (otg_mode_host) {
-               otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-                               ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+               otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+                               ULPI_OTG_DRVVBUS_EXT);
 
-               imx27_add_mxc_ehci_otg(&otg_pdata);
+               if (otg_pdata.otg)
+                       imx27_add_mxc_ehci_otg(&otg_pdata);
+       } else {
+               gpio_set_value(OTG_PHY_CS_GPIO, 0);
+               imx27_add_fsl_usb2_udc(&otg_device_pdata);
        }
 
        usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
                                ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-       imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
-       if (!otg_mode_host) {
-               gpio_set_value(OTG_PHY_CS_GPIO, 0);
-               imx27_add_fsl_usb2_udc(&otg_device_pdata);
-       }
+       if (usbh2_pdata.otg)
+               imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
 
        imx27_add_imx_fb(&pca100_fb_data);
 
@@ -437,10 +434,10 @@ static struct sys_timer pca100_timer = {
 };
 
 MACHINE_START(PCA100, "phyCARD-i.MX27")
-       .boot_params    = MX27_PHYS_OFFSET + 0x100,
-       .map_io         = mx27_map_io,
-       .init_irq       = mx27_init_irq,
-       .init_machine   = pca100_init,
-       .timer          = &pca100_timer,
+       .boot_params = MX27_PHYS_OFFSET + 0x100,
+       .map_io = mx27_map_io,
+       .init_early = imx27_init_early,
+       .init_irq = mx27_init_irq,
+       .init_machine = pca100_init,
+       .timer = &pca100_timer,
 MACHINE_END
-