#include <linux/i2c.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
+#include <linux/fb.h>
#include <linux/mfd/max8998.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <plat/devs.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
+#include <plat/fb.h>
#include <plat/mfc.h>
#include <plat/sdhci.h>
#include <plat/pd.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/fimc-core.h>
+#include <plat/camport.h>
+#include <plat/mipi_csis.h>
#include <mach/map.h>
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/m5mols.h>
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
};
static struct regulator_consumer_supply max8952_consumer =
- REGULATOR_SUPPLY("vddarm", NULL);
+ REGULATOR_SUPPLY("vdd_arm", NULL);
static struct max8952_platform_data universal_max8952_pdata __initdata = {
.gpio_vid0 = EXYNOS4_GPX0(3),
};
static struct regulator_consumer_supply lp3974_buck1_consumer =
- REGULATOR_SUPPLY("vddint", NULL);
+ REGULATOR_SUPPLY("vdd_int", NULL);
static struct regulator_consumer_supply lp3974_buck2_consumer =
REGULATOR_SUPPLY("vddg3d", NULL);
+static struct regulator_consumer_supply lp3974_buck3_consumer =
+ REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
static struct regulator_init_data lp3974_buck1_data = {
.constraints = {
.name = "VINT_1.1V",
.enabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_buck3_consumer,
};
static struct regulator_init_data lp3974_buck4_data = {
},
};
+static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
+ REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
+ REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
+ REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
+};
+
static struct regulator_init_data lp3974_ldo3_data = {
.constraints = {
.name = "VUSB+MIPI_1.1V",
.disabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
+ .consumer_supplies = lp3974_ldo3_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
+ REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
};
static struct regulator_init_data lp3974_ldo4_data = {
.disabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
+ .consumer_supplies = lp3974_ldo4_consumer,
};
static struct regulator_init_data lp3974_ldo5_data = {
},
};
+static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
+ REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"),
+};
+
static struct regulator_init_data lp3974_ldo7_data = {
.constraints = {
.name = "VLCD+VMIPI_1.8V",
.disabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo7_consumer),
+ .consumer_supplies = lp3974_ldo7_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
+ REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
};
static struct regulator_init_data lp3974_ldo8_data = {
.disabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
+ .consumer_supplies = lp3974_ldo8_consumer,
};
static struct regulator_init_data lp3974_ldo9_data = {
},
};
+static struct regulator_consumer_supply lp3974_ldo11_consumer =
+ REGULATOR_SUPPLY("dig_28", "0-001f");
+
static struct regulator_init_data lp3974_ldo11_data = {
.constraints = {
.name = "CAM_AF_3.3V",
.disabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_ldo11_consumer,
};
static struct regulator_init_data lp3974_ldo12_data = {
},
};
+static struct regulator_consumer_supply lp3974_ldo14_consumer =
+ REGULATOR_SUPPLY("dig_18", "0-001f");
+
static struct regulator_init_data lp3974_ldo14_data = {
.constraints = {
.name = "CAM_I_HOST_1.8V",
.disabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_ldo14_consumer,
};
+
+static struct regulator_consumer_supply lp3974_ldo15_consumer =
+ REGULATOR_SUPPLY("dig_12", "0-001f");
+
static struct regulator_init_data lp3974_ldo15_data = {
.constraints = {
.name = "CAM_S_DIG+FM33_CORE_1.2V",
.disabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_ldo15_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
+ REGULATOR_SUPPLY("a_sensor", "0-001f"),
};
static struct regulator_init_data lp3974_ldo16_data = {
.disabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo16_consumer),
+ .consumer_supplies = lp3974_ldo16_consumer,
};
static struct regulator_init_data lp3974_ldo17_data = {
.wakeup = true,
};
+
+enum fixed_regulator_id {
+ FIXED_REG_ID_MMC0,
+ FIXED_REG_ID_HDMI_5V,
+ FIXED_REG_ID_CAM_S_IF,
+ FIXED_REG_ID_CAM_I_CORE,
+ FIXED_REG_ID_CAM_VT_DIO,
+};
+
+static struct regulator_consumer_supply hdmi_fixed_consumer =
+ REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
+
+static struct regulator_init_data hdmi_fixed_voltage_init_data = {
+ .constraints = {
+ .name = "HDMI_5V",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &hdmi_fixed_consumer,
+};
+
+static struct fixed_voltage_config hdmi_fixed_voltage_config = {
+ .supply_name = "HDMI_EN1",
+ .microvolts = 5000000,
+ .gpio = EXYNOS4_GPE0(1),
+ .enable_high = true,
+ .init_data = &hdmi_fixed_voltage_init_data,
+};
+
+static struct platform_device hdmi_fixed_voltage = {
+ .name = "reg-fixed-voltage",
+ .id = FIXED_REG_ID_HDMI_5V,
+ .dev = {
+ .platform_data = &hdmi_fixed_voltage_config,
+ },
+};
+
/* GPIO I2C 5 (PMIC) */
static struct i2c_board_info i2c5_devs[] __initdata = {
{
gpio_direction_output(gpio, 1);
}
+static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
+ .frequency = 300 * 1000,
+ .sda_delay = 200,
+};
+
/* GPIO KEYS */
static struct gpio_keys_button universal_gpio_keys_tables[] = {
{
static struct platform_device mmc0_fixed_voltage = {
.name = "reg-fixed-voltage",
- .id = 0,
+ .id = FIXED_REG_ID_MMC0,
.dev = {
.platform_data = &mmc0_fixed_voltage_config,
},
s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
}
-/* I2C0 */
-static struct i2c_board_info i2c0_devs[] __initdata = {
- /* Camera, To be updated */
-};
-
/* I2C1 */
static struct i2c_board_info i2c1_devs[] __initdata = {
/* Gyro, To be updated */
};
+/* Frame Buffer */
+static struct s3c_fb_pd_win universal_fb_win0 = {
+ .win_mode = {
+ .left_margin = 16,
+ .right_margin = 16,
+ .upper_margin = 2,
+ .lower_margin = 28,
+ .hsync_len = 2,
+ .vsync_len = 1,
+ .xres = 480,
+ .yres = 800,
+ .refresh = 55,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
+ .win[0] = &universal_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+ VIDCON0_CLKSEL_LCD,
+ .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
+ | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
+static struct regulator_consumer_supply cam_i_core_supply =
+ REGULATOR_SUPPLY("core", "0-001f");
+
+static struct regulator_init_data cam_i_core_reg_init_data = {
+ .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cam_i_core_supply,
+};
+
+static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
+ .supply_name = "CAM_I_CORE_1.2V",
+ .microvolts = 1200000,
+ .gpio = EXYNOS4_GPE2(2), /* CAM_8M_CORE_EN */
+ .enable_high = 1,
+ .init_data = &cam_i_core_reg_init_data,
+};
+
+static struct platform_device cam_i_core_fixed_reg_dev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
+ .dev = { .platform_data = &cam_i_core_fixed_voltage_cfg },
+};
+
+static struct regulator_consumer_supply cam_s_if_supply =
+ REGULATOR_SUPPLY("d_sensor", "0-001f");
+
+static struct regulator_init_data cam_s_if_reg_init_data = {
+ .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cam_s_if_supply,
+};
+
+static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
+ .supply_name = "CAM_S_IF_1.8V",
+ .microvolts = 1800000,
+ .gpio = EXYNOS4_GPE3(0), /* CAM_PWR_EN1 */
+ .enable_high = 1,
+ .init_data = &cam_s_if_reg_init_data,
+};
+
+static struct platform_device cam_s_if_fixed_reg_dev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
+ .dev = { .platform_data = &cam_s_if_fixed_voltage_cfg },
+};
+
+static struct s5p_platform_mipi_csis mipi_csis_platdata = {
+ .clk_rate = 166000000UL,
+ .lanes = 2,
+ .alignment = 32,
+ .hs_settle = 12,
+ .phy_enable = s5p_csis_phy_enable,
+};
+
+#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3)
+#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */
+#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5)
+
+static int m5mols_set_power(struct device *dev, int on)
+{
+ gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
+ gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
+ return 0;
+}
+
+static struct m5mols_platform_data m5mols_platdata = {
+ .gpio_reset = GPIO_CAM_MEGA_nRST,
+ .reset_polarity = 0,
+ .set_power = m5mols_set_power,
+};
+
+static struct i2c_board_info m5mols_board_info = {
+ I2C_BOARD_INFO("M5MOLS", 0x1F),
+ .platform_data = &m5mols_platdata,
+};
+
+static struct s5p_fimc_isp_info universal_camera_sensors[] = {
+ {
+ .mux_id = 0,
+ .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW,
+ .bus_type = FIMC_MIPI_CSI2,
+ .board_info = &m5mols_board_info,
+ .i2c_bus_num = 0,
+ .clk_frequency = 21600000UL,
+ .csi_data_align = 32,
+ },
+};
+
+static struct s5p_platform_fimc fimc_md_platdata = {
+ .isp_info = universal_camera_sensors,
+ .num_clients = ARRAY_SIZE(universal_camera_sensors),
+};
+
+static struct gpio universal_camera_gpios[] = {
+ { GPIO_CAM_LEVEL_EN(1), GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
+ { GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" },
+ { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
+ { GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
+};
+
+static void universal_camera_init(void)
+{
+ s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
+ &s5p_device_mipi_csis0);
+ s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata),
+ &s5p_device_fimc_md);
+
+ if (gpio_request_array(universal_camera_gpios,
+ ARRAY_SIZE(universal_camera_gpios))) {
+ pr_err("%s: GPIO request failed\n", __func__);
+ return;
+ }
+
+ if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
+ m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
+ else
+ pr_err("Failed to configure 8M_ISP_INT GPIO\n");
+
+ /* Free GPIOs controlled directly by the sensor drivers. */
+ gpio_free(GPIO_CAM_MEGA_nRST);
+ gpio_free(GPIO_CAM_8M_ISP_INT);
+
+ if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
+ pr_err("Camera port A setup failed\n");
+}
+
static struct platform_device *universal_devices[] __initdata = {
/* Samsung Platform Devices */
+ &s5p_device_mipi_csis0,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
+ &s3c_device_i2c0,
&s3c_device_i2c3,
&s3c_device_i2c5,
+ &s5p_device_i2c_hdmiphy,
+ &hdmi_fixed_voltage,
+ &exynos4_device_pd[PD_TV],
+ &s5p_device_hdmi,
+ &s5p_device_sdo,
+ &s5p_device_mixer,
/* Universal Devices */
&i2c_gpio12,
&universal_gpio_keys,
&s5p_device_onenand,
+ &s5p_device_fimd0,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&exynos4_device_pd[PD_MFC],
+ &exynos4_device_pd[PD_LCD0],
+ &exynos4_device_pd[PD_CAM],
+ &cam_i_core_fixed_reg_dev,
+ &cam_s_if_fixed_reg_dev,
+ &s5p_device_fimc_md,
};
static void __init universal_map_io(void)
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
}
+void s5p_tv_setup(void)
+{
+ /* direct HPD to HDMI chip */
+ gpio_request(EXYNOS4_GPX3(7), "hpd-plug");
+
+ gpio_direction_input(EXYNOS4_GPX3(7));
+ s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+ s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+ /* setup dependencies between TV devices */
+ s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+ s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
static void __init universal_reserve(void)
{
s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
static void __init universal_machine_init(void)
{
universal_sdhci_init();
+ s5p_tv_setup();
- i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+ s3c_i2c0_set_platdata(&universal_i2c0_platdata);
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
universal_tsp_init();
i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
s3c_i2c5_set_platdata(NULL);
+ s5p_i2c_hdmiphy_set_platdata(NULL);
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
+ s5p_fimd0_set_platdata(&universal_lcd_pdata);
+
universal_touchkey_init();
i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
ARRAY_SIZE(i2c_gpio12_devs));
+ universal_camera_init();
+
/* Last */
platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
+
s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+ s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+ s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
}
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
git.openpandora.org / pandora-kernel.git / blobdiff