Merge branch 'topic/hda' into for-linus

[pandora-kernel.git] / arch / arm / mach-davinci / include / mach / gpio.h

diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index b456f07..efe3281 100644 (file)
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -15,9 +15,11 @@
 
 #include <linux/io.h>
 #include <asm-generic/gpio.h>
-#include <mach/hardware.h>
+
 #include <mach/irqs.h>
 
+#define DAVINCI_GPIO_BASE 0x01C67000
+
 /*
  * basic gpio routines
  *
@@ -26,23 +28,18 @@
  * go through boot loaders.
  *
  * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
+ * need to pay attention to PINMUX registers to be sure those pins are
  * used as gpios, not with other peripherals.
  *
  * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation,
- * and maybe for later updates, code should write GPIO(N) or:
- *  - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
- *  - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
- *
- * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
- * for now, that's != GPIO(N)
+ * and maybe for later updates, code may write GPIO(N).  These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two.  A given chip
+ * may not support all the GPIOs in that range.
  *
  * GPIOs can also be on external chips, numbered after the ones built-in
  * to the DaVinci chip.  For now, they won't be usable as IRQ sources.
  */
-#define        GPIO(X)         (X)             /* 0 <= X <= 70 */
-#define        GPIOV18(X)      (X)             /* 1.8V i/o; 0 <= X <= 53 */
-#define        GPIOV33(X)      ((X)+54)        /* 3.3V i/o; 0 <= X <= 17 */
+#define        GPIO(X)         (X)             /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
 
 struct gpio_controller {
        u32     dir;
@@ -71,12 +68,14 @@ __gpio_to_controller(unsigned gpio)
 {
        void *__iomem ptr;
 
-       if (gpio < 32)
+       if (gpio < 32 * 1)
                ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
-       else if (gpio < 64)
+       else if (gpio < 32 * 2)
                ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
-       else if (gpio < DAVINCI_N_GPIO)
+       else if (gpio < 32 * 3)
                ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+       else if (gpio < 32 * 4)
+               ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
        else
                ptr = NULL;
        return ptr;