select ARCH_DAVINCI_DMx
config ARCH_DAVINCI_DM355
- bool "DaVinci 355 based system"
+ bool "DaVinci 355 based system"
select AINTC
select ARCH_DAVINCI_DMx
config ARCH_DAVINCI_DM646x
- bool "DaVinci 646x based system"
+ bool "DaVinci 646x based system"
select AINTC
select ARCH_DAVINCI_DMx
config ARCH_DAVINCI_DA830
- bool "DA830/OMAP-L137 based system"
+ bool "DA830/OMAP-L137/AM17x based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
config ARCH_DAVINCI_DA850
- bool "DA850/OMAP-L138 based system"
+ bool "DA850/OMAP-L138/AM18x based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
select ARCH_HAS_CPUFREQ
for development is a DM365 EVM
config MACH_DAVINCI_DA830_EVM
- bool "TI DA830/OMAP-L137 Reference Platform"
+ bool "TI DA830/OMAP-L137/AM17x Reference Platform"
default ARCH_DAVINCI_DA830
depends on ARCH_DAVINCI_DA830
select GPIO_PCF857X
help
- Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
+ Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
choice
- prompt "Select DA830/OMAP-L137 UI board peripheral"
+ prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
depends on MACH_DAVINCI_DA830_EVM
help
- The presence of UI card on the DA830/OMAP-L137 EVM is detected
- automatically based on successful probe of the I2C based GPIO
- expander on that board. This option selected in this menu has
- an effect only in case of a successful UI card detection.
+ The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
+ detected automatically based on successful probe of the I2C
+ based GPIO expander on that board. This option selected in this
+ menu has an effect only in case of a successful UI card detection.
config DA830_UI_LCD
bool "LCD"
config DA830_UI_NAND
bool "NAND flash"
help
- Say Y here to use the NAND flash. Do not forget to setup
+ Say Y here to use the NAND flash. Do not forget to setup
the switch correctly.
endchoice
config MACH_DAVINCI_DA850_EVM
- bool "TI DA850/OMAP-L138 Reference Platform"
+ bool "TI DA850/OMAP-L138/AM18x Reference Platform"
default ARCH_DAVINCI_DA850
depends on ARCH_DAVINCI_DA850
select GPIO_PCA953X
help
- Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
+ Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
choice
prompt "Select peripherals connected to expander on UI board"
depends on MACH_DAVINCI_DA850_EVM
help
- The presence of User Interface (UI) card on the DA850/OMAP-L138
+ The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
EVM is detected automatically based on successful probe of the I2C
based GPIO expander on that card. This option selected in this
menu has an effect only in case of a successful UI card detection.
bool "No peripheral is enabled"
help
Say Y if you do not want to enable any of the peripherals connected
- to TCA6416 expander on DA850/OMAP-L138 EVM UI card
+ to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
config DA850_UI_RMII
bool "RMII Ethernet PHY"
help
- Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM.
- This PHY is found on the UI daughter card that is supplied with
+ Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
+ EVM. This PHY is found on the UI daughter card that is supplied with
the EVM.
NOTE: Please take care while choosing this option, MII PHY will
not be functional if RMII mode is selected.
help
Say Y here to select the TI TNETV107X Evaluation Module.
+config MACH_MITYOMAPL138
+ bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
+ depends on ARCH_DAVINCI_DA850
+ help
+ Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
+ System on Module. Information on this SoM may be found at
+ http://www.mitydsp.com
+
+config MACH_OMAPL138_HAWKBOARD
+ bool "TI AM1808 / OMAPL-138 Hawkboard platform"
+ depends on ARCH_DAVINCI_DA850
+ help
+ Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
+ Information of this board may be found at
+ http://www.hawkboard.org/
+
config DAVINCI_MUX
bool "DAVINCI multiplexing support"
depends on ARCH_DAVINCI
say Y.
config DAVINCI_MUX_DEBUG
- bool "Multiplexing debug output"
- depends on DAVINCI_MUX
- help
- Makes the multiplexing functions print out a lot of debug info.
- This is useful if you want to find out the correct values of the
- multiplexing registers.
+ bool "Multiplexing debug output"
+ depends on DAVINCI_MUX
+ help
+ Makes the multiplexing functions print out a lot of debug info.
+ This is useful if you want to find out the correct values of the
+ multiplexing registers.
config DAVINCI_MUX_WARNINGS
- bool "Warn about pins the bootloader didn't set up"
- depends on DAVINCI_MUX
- help
- Choose Y here to warn whenever driver initialization logic needs
- to change the pin multiplexing setup. When there are no warnings
- printed, it's safe to deselect DAVINCI_MUX for your product.
+ bool "Warn about pins the bootloader didn't set up"
+ depends on DAVINCI_MUX
+ help
+ Choose Y here to warn whenever driver initialization logic needs
+ to change the pin multiplexing setup. When there are no warnings
+ printed, it's safe to deselect DAVINCI_MUX for your product.
config DAVINCI_RESET_CLOCKS
bool "Reset unused clocks during boot"
git.openpandora.org / pandora-kernel.git / blobdiff