Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq

[pandora-kernel.git] / arch / arm / mach-at91rm9200 / board-ek.c

diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c
index 80d90f5..8681923 100644 (file)
--- a/arch/arm/mach-at91rm9200/board-ek.c
+++ b/arch/arm/mach-at91rm9200/board-ek.c
@@ -21,12 +21,12 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/spi/spi.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -37,9 +37,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/mach/serial_at91rm9200.h>
+#include <asm/hardware.h>
 #include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
 
 #include "generic.h"
 
@@ -57,14 +57,14 @@ static void __init ek_init_irq(void)
  *    0 .. 3 = USART0 .. USART3
  *    4      = DBGU
  */
-#define EK_UART_MAP            { 4, 1, -1, -1, -1 }    /* ttyS0, ..., ttyS4 */
-#define EK_SERIAL_CONSOLE      0                       /* ttyS0 */
+static struct at91_uart_config __initdata ek_uart_config = {
+       .console_tty    = 0,                            /* ttyS0 */
+       .nr_tty         = 2,
+       .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
+};
 
 static void __init ek_map_io(void)
 {
-       int serial[AT91_NR_UART] = EK_UART_MAP;
-       int i;
-
        at91rm9200_map_io();
 
        /* Initialize clocks: 18.432 MHz crystal */
@@ -73,16 +73,8 @@ static void __init ek_map_io(void)
        /* Setup the LEDs */
        at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
 
-#ifdef CONFIG_SERIAL_AT91
-       at91_console_port = EK_SERIAL_CONSOLE;
-       memcpy(at91_serial_map, serial, sizeof(serial));
-
-       /* Register UARTs */
-       for (i = 0; i < AT91_NR_UART; i++) {
-               if (serial[i] >= 0)
-                       at91_register_uart(i, serial[i]);
-       }
-#endif
+       /* Setup the serial ports and console */
+       at91_init_serial(&ek_uart_config);
 }
 
 static struct at91_eth_data __initdata ek_eth_data = {
@@ -106,14 +98,36 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
        .wp_pin         = AT91_PIN_PA17,
 };
 
+static struct spi_board_info ek_spi_devices[] = {
+       {       /* DataFlash chip */
+               .modalias       = "mtd_dataflash",
+               .chip_select    = 0,
+               .max_speed_hz   = 15 * 1000 * 1000,
+       },
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+       {       /* DataFlash card */
+               .modalias       = "mtd_dataflash",
+               .chip_select    = 3,
+               .max_speed_hz   = 15 * 1000 * 1000,
+       },
+#endif
+};
+
 static void __init ek_board_init(void)
 {
+       /* Serial */
+       at91_add_device_serial();
        /* Ethernet */
        at91_add_device_eth(&ek_eth_data);
        /* USB Host */
        at91_add_device_usbh(&ek_usbh_data);
        /* USB Device */
        at91_add_device_udc(&ek_udc_data);
+       at91_set_multi_drive(ek_udc_data.pullup_pin, 1);        /* pullup_pin is connected to reset */
+       /* I2C */
+       at91_add_device_i2c();
+       /* SPI */
+       at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
        /* DataFlash card */
        at91_set_gpio_output(AT91_PIN_PB22, 0);