[IA64] relax per-cpu TLB requirement to DTC

[pandora-kernel.git] / arch / arm / mach-at91rm9200 / Kconfig

diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91rm9200/Kconfig
index 1ab5b78..9f11db8 100644 (file)
--- a/arch/arm/mach-at91rm9200/Kconfig
+++ b/arch/arm/mach-at91rm9200/Kconfig
@@ -1,59 +1,141 @@
-if ARCH_AT91RM9200
+if ARCH_AT91
+
+menu "Atmel AT91 System-on-Chip"
+
+choice
+       prompt "Atmel AT91 Processor"
+
+config ARCH_AT91RM9200
+       bool "AT91RM9200"
+
+config ARCH_AT91SAM9260
+       bool "AT91SAM9260"
 
-menu "AT91RM9200 Implementations"
+config ARCH_AT91SAM9261
+       bool "AT91SAM9261"
+
+endchoice
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
 
 comment "AT91RM9200 Board Type"
 
+config MACH_ONEARM
+       bool "Ajeco 1ARM Single Board Computer"
+       depends on ARCH_AT91RM9200
+       help
+         Select this if you are using Ajeco's 1ARM Single Board Computer.
+         <http://www.ajeco.fi/products.htm>
+
 config ARCH_AT91RM9200DK
        bool "Atmel AT91RM9200-DK Development board"
        depends on ARCH_AT91RM9200
        help
-         Select this if you are using Atmel's AT91RM9200-DK Development board
+         Select this if you are using Atmel's AT91RM9200-DK Development board.
+         (Discontinued)
 
 config MACH_AT91RM9200EK
        bool "Atmel AT91RM9200-EK Evaluation Kit"
        depends on ARCH_AT91RM9200
        help
-         Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit
+         Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+         <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
 
 config MACH_CSB337
-       bool "Cogent CSB337 board"
+       bool "Cogent CSB337"
        depends on ARCH_AT91RM9200
        help
-         Select this if you are using Cogent's CSB337 board
+         Select this if you are using Cogent's CSB337 board.
+         <http://www.cogcomp.com/csb_csb337.htm>
 
 config MACH_CSB637
-       bool "Cogent CSB637 board"
+       bool "Cogent CSB637"
        depends on ARCH_AT91RM9200
        help
-         Select this if you are using Cogent's CSB637 board
+         Select this if you are using Cogent's CSB637 board.
+         <http://www.cogcomp.com/csb_csb637.htm>
 
 config MACH_CARMEVA
-       bool "Conitec's ARM&EVA"
+       bool "Conitec ARM&EVA"
        depends on ARCH_AT91RM9200
        help
-         Select this if you are using Conitec's AT91RM9200-MCU-Module
+         Select this if you are using Conitec's AT91RM9200-MCU-Module.
+         <http://www.conitec.net/english/linuxboard.htm>
 
-config MACH_KB9200
-       bool "KwikByte's KB920x"
+config MACH_ATEB9200
+       bool "Embest ATEB9200"
        depends on ARCH_AT91RM9200
        help
-         Select this if you are using KwikByte's KB920x board
+         Select this if you are using Embest's ATEB9200 board.
+         <http://www.embedinfo.com/english/product/ATEB9200.asp>
 
-config MACH_ATEB9200
-       bool "Embest's ATEB9200"
+config MACH_KB9200
+       bool "KwikByte KB920x"
        depends on ARCH_AT91RM9200
        help
-         Select this if you are using Embest's ATEB9200 board
+         Select this if you are using KwikByte's KB920x board.
+         <http://kwikbyte.com/KB9202_description_new.htm>
 
 config MACH_KAFA
        bool "Sperry-Sun KAFA board"
        depends on ARCH_AT91RM9200
        help
-         Select this if you are using Sperry-Sun's KAFA board
+         Select this if you are using Sperry-Sun's KAFA board.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Board Type"
+
+config MACH_AT91SAM9260EK
+       bool "Atmel AT91SAM9260-EK Evaluation Kit"
+       depends on ARCH_AT91SAM9260
+       help
+         Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
+         <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+config MACH_AT91SAM9261EK
+       bool "Atmel AT91SAM9261-EK Evaluation Kit"
+       depends on ARCH_AT91SAM9261
+       help
+         Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+         <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
+endif
+
+# ----------------------------------------------------------
+
+comment "AT91 Board Options"
+
+config MTD_AT91_DATAFLASH_CARD
+       bool "Enable DataFlash Card support"
+       depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
+       help
+         Enable support for the DataFlash card.
+
+config MTD_NAND_AT91_BUSWIDTH_16
+       bool "Enable 16-bit data bus interface to NAND flash"
+       depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
+       help
+         On AT91SAM926x boards both types of NAND flash can be present
+         (8 and 16 bit data bus width).
 
+# ----------------------------------------------------------
 
-comment "AT91RM9200 Feature Selections"
+comment "AT91 Feature Selections"
 
 config AT91_PROGRAMMABLE_CLOCKS
        bool "Programmable Clocks"