Merge branch 'master' of /home/cbou/linux-2.6

[pandora-kernel.git] / arch / arm / mach-at91 / board-ek.c

diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 53a5ef9..74aa432 100644 (file)
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -45,17 +45,6 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata ek_uart_config = {
-       .console_tty    = 0,                            /* ttyS0 */
-       .nr_tty         = 2,
-       .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
-};
-
 static void __init ek_map_io(void)
 {
        /* Initialize processor: 18.432 MHz crystal */
@@ -64,8 +53,16 @@ static void __init ek_map_io(void)
        /* Setup the LEDs */
        at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
 
-       /* Setup the serial ports and console */
-       at91_init_serial(&ek_uart_config);
+       /* DBGU on ttyS0. (Rx & Tx only) */
+       at91_register_uart(0, 0, 0);
+
+       /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+       at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+                          | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+                          | ATMEL_UART_RI);
+
+       /* set serial console to ttyS0 (ie, DBGU) */
+       at91_set_serial_console(0);
 }
 
 static void __init ek_init_irq(void)
@@ -122,7 +119,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 #define EK_FLASH_SIZE  0x200000
 
 static struct physmap_flash_data ek_flash_data = {
-       .width  = 2,
+       .width          = 2,
 };
 
 static struct resource ek_flash_resource = {
@@ -141,6 +138,25 @@ static struct platform_device ek_flash = {
        .num_resources  = 1,
 };
 
+static struct gpio_led ek_leds[] = {
+       {       /* "user led 1", DS2 */
+               .name                   = "green",
+               .gpio                   = AT91_PIN_PB0,
+               .active_low             = 1,
+               .default_trigger        = "mmc0",
+       },
+       {       /* "user led 2", DS4 */
+               .name                   = "yellow",
+               .gpio                   = AT91_PIN_PB1,
+               .active_low             = 1,
+               .default_trigger        = "heartbeat",
+       },
+       {       /* "user led 3", DS6 */
+               .name                   = "red",
+               .gpio                   = AT91_PIN_PB2,
+               .active_low             = 1,
+       }
+};
 
 static void __init ek_board_init(void)
 {
@@ -167,6 +183,8 @@ static void __init ek_board_init(void)
 #endif
        /* NOR Flash */
        platform_device_register(&ek_flash);
+       /* LEDs */
+       at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
        /* VGA */
 //     ek_add_device_video();
 }