Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6

[pandora-kernel.git] / arch / arm / mach-at91 / at91sam9260_devices.c

diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 3aa62b1..cae5f52 100644 (file)
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -18,6 +18,7 @@
 
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>

+#include <asm/arch/cpu.h>

 #include <asm/arch/at91sam9260.h>
 #include <asm/arch/at91sam9260_matrix.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91sam9260.h>
 #include <asm/arch/at91sam9260_matrix.h>
 #include <asm/arch/at91sam9_smc.h>


@@ -320,20 +321,41 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
        csa = at91_sys_read(AT91_MATRIX_EBICSA);
        at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
        csa = at91_sys_read(AT91_MATRIX_EBICSA);
        at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 

-       /* set the bus interface characteristics */
-       at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-                       | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+       if (cpu_is_at91sam9260()) {
+               /* Timing for sam9260 */
+               /* set the bus interface characteristics */
+               at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
+                               | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));

 
 

-       at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
-                       | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+               at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+                               | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));

 
 

-       at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+               at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));

 
 

-       if (data->bus_width_16)
-               mode = AT91_SMC_DBW_16;
-       else
-               mode = AT91_SMC_DBW_8;
-       at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+               if (data->bus_width_16)
+                       mode = AT91_SMC_DBW_16;
+               else
+                       mode = AT91_SMC_DBW_8;
+               at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+       }
+
+       if (cpu_is_at91sam9g20()) {
+               /* Timing for sam9g20 */
+               /* set the bus interface characteristics */
+               at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0)
+                               | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+
+               at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(4)
+                               | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(4));
+
+               at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+
+               if (data->bus_width_16)
+                       mode = AT91_SMC_DBW_16;
+               else
+                       mode = AT91_SMC_DBW_8;
+               at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(3));
+       }

 
        /* enable pin */
        if (data->enable_pin)
 
        /* enable pin */
        if (data->enable_pin)