#include <mach/debug-macro.S>
#endif
-#if (PHYS_OFFSET & 0x001fffff)
-#error "PHYS_OFFSET must be at an even 2MiB boundary!"
-#endif
-
-#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
-#define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET)
-
-
/*
* swapper_pg_dir is the virtual address of the initial page table.
* We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must
* the least significant 16 bits to be 0x8000, but we could probably
* relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000.
*/
+#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
#error KERNEL_RAM_VADDR must start at 0xXXXX8000
#endif
.globl swapper_pg_dir
.equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000
- .macro pgtbl, rd
- ldr \rd, =(KERNEL_RAM_PADDR - 0x4000)
+ .macro pgtbl, rd, phys
+ add \rd, \phys, #TEXT_OFFSET - 0x4000
.endm
#ifdef CONFIG_XIP_KERNEL
movs r10, r5 @ invalid processor (r5=0)?
THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p @ yes, error 'p'
- bl __lookup_machine_type @ r5=machinfo
- movs r8, r5 @ invalid machine (r5=0)?
- THUMB( it eq ) @ force fixup-able long branch encoding
- beq __error_a @ yes, error 'a'
+
+#ifndef CONFIG_XIP_KERNEL
+ adr r3, 2f
+ ldmia r3, {r4, r8}
+ sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET)
+ add r8, r8, r4 @ PHYS_OFFSET
+#else
+ ldr r8, =PLAT_PHYS_OFFSET
+#endif
/*
* r1 = machine no, r2 = atags,
- * r8 = machinfo, r9 = cpuid, r10 = procinfo
+ * r8 = phys_offset, r9 = cpuid, r10 = procinfo
*/
bl __vet_atags
#ifdef CONFIG_SMP_ON_UP
bl __fixup_smp
+#endif
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+ bl __fixup_pv_table
#endif
bl __create_page_tables
/*
* The following calls CPU specific code in a position independent
* manner. See arch/arm/mm/proc-*.S for details. r10 = base of
- * xxx_proc_info structure selected by __lookup_machine_type
+ * xxx_proc_info structure selected by __lookup_processor_type
* above. On return, the CPU will be ready for the MMU to be
* turned on, and r0 will hold the CPU control register value.
*/
1: b __enable_mmu
ENDPROC(stext)
.ltorg
+#ifndef CONFIG_XIP_KERNEL
+2: .long .
+ .long PAGE_OFFSET
+#endif
/*
* Setup the initial page tables. We only setup the barest
* amount which are required to get the kernel running, which
* generally means mapping in the kernel code.
*
- * r8 = machinfo
- * r9 = cpuid
- * r10 = procinfo
+ * r8 = phys_offset, r9 = cpuid, r10 = procinfo
*
* Returns:
* r0, r3, r5-r7 corrupted
* r4 = physical page table address
*/
__create_page_tables:
- pgtbl r4 @ page table address
+ pgtbl r4, r8 @ page table address
/*
* Clear the 16K level 1 swapper page table
/*
* Map some ram to cover our .data and .bss areas.
*/
- orr r3, r7, #(KERNEL_RAM_PADDR & 0xff000000)
- .if (KERNEL_RAM_PADDR & 0x00f00000)
- orr r3, r3, #(KERNEL_RAM_PADDR & 0x00f00000)
- .endif
+ add r3, r8, #TEXT_OFFSET
+ orr r3, r3, r7
add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> 18
str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]!
ldr r6, =(_end - 1)
#endif
/*
- * Then map first 1MB of ram in case it contains our boot params.
+ * Then map boot params address in r2 or
+ * the first 1MB of ram if boot params address is not specified.
*/
- add r0, r4, #PAGE_OFFSET >> 18
- orr r6, r7, #(PHYS_OFFSET & 0xff000000)
- .if (PHYS_OFFSET & 0x00f00000)
- orr r6, r6, #(PHYS_OFFSET & 0x00f00000)
- .endif
- str r6, [r0]
+ mov r0, r2, lsr #20
+ movs r0, r0, lsl #20
+ moveq r0, r8
+ sub r3, r0, r8
+ add r3, r3, #PAGE_OFFSET
+ add r3, r4, r3, lsr #18
+ orr r6, r7, r0
+ str r6, [r3]
#ifdef CONFIG_DEBUG_LL
#ifndef CONFIG_DEBUG_ICEDCC
ldmfd sp!, {r4 - r6, pc}
ENDPROC(fixup_smp)
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+
+/* __fixup_pv_table - patch the stub instructions with the delta between
+ * PHYS_OFFSET and PAGE_OFFSET, which is assumed to be 16MiB aligned and
+ * can be expressed by an immediate shifter operand. The stub instruction
+ * has a form of '(add|sub) rd, rn, #imm'.
+ */
+ __HEAD
+__fixup_pv_table:
+ adr r0, 1f
+ ldmia r0, {r3-r5, r7}
+ sub r3, r0, r3 @ PHYS_OFFSET - PAGE_OFFSET
+ add r4, r4, r3 @ adjust table start address
+ add r5, r5, r3 @ adjust table end address
+ add r7, r7, r3 @ adjust __pv_phys_offset address
+ str r8, [r7] @ save computed PHYS_OFFSET to __pv_phys_offset
+#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+ mov r6, r3, lsr #24 @ constant for add/sub instructions
+ teq r3, r6, lsl #24 @ must be 16MiB aligned
+#else
+ mov r6, r3, lsr #16 @ constant for add/sub instructions
+ teq r3, r6, lsl #16 @ must be 64kiB aligned
+#endif
+THUMB( it ne @ cross section branch )
+ bne __error
+ str r6, [r7, #4] @ save to __pv_offset
+ b __fixup_a_pv_table
+ENDPROC(__fixup_pv_table)
+
+ .align
+1: .long .
+ .long __pv_table_begin
+ .long __pv_table_end
+2: .long __pv_phys_offset
+
+ .text
+__fixup_a_pv_table:
+#ifdef CONFIG_THUMB2_KERNEL
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+ lsls r0, r6, #24
+ lsr r6, #8
+ beq 1f
+ clz r7, r0
+ lsr r0, #24
+ lsl r0, r7
+ bic r0, 0x0080
+ lsrs r7, #1
+ orrcs r0, #0x0080
+ orr r0, r0, r7, lsl #12
+#endif
+1: lsls r6, #24
+ beq 4f
+ clz r7, r6
+ lsr r6, #24
+ lsl r6, r7
+ bic r6, #0x0080
+ lsrs r7, #1
+ orrcs r6, #0x0080
+ orr r6, r6, r7, lsl #12
+ orr r6, #0x4000
+ b 4f
+2: @ at this point the C flag is always clear
+ add r7, r3
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+ ldrh ip, [r7]
+ tst ip, 0x0400 @ the i bit tells us LS or MS byte
+ beq 3f
+ cmp r0, #0 @ set C flag, and ...
+ biceq ip, 0x0400 @ immediate zero value has a special encoding
+ streqh ip, [r7] @ that requires the i bit cleared
+#endif
+3: ldrh ip, [r7, #2]
+ and ip, 0x8f00
+ orrcc ip, r6 @ mask in offset bits 31-24
+ orrcs ip, r0 @ mask in offset bits 23-16
+ strh ip, [r7, #2]
+4: cmp r4, r5
+ ldrcc r7, [r4], #4 @ use branch for delay slot
+ bcc 2b
+ bx lr
+#else
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+ and r0, r6, #255 @ offset bits 23-16
+ mov r6, r6, lsr #8 @ offset bits 31-24
+#else
+ mov r0, #0 @ just in case...
+#endif
+ b 3f
+2: ldr ip, [r7, r3]
+ bic ip, ip, #0x000000ff
+ tst ip, #0x400 @ rotate shift tells us LS or MS byte
+ orrne ip, ip, r6 @ mask in offset bits 31-24
+ orreq ip, ip, r0 @ mask in offset bits 23-16
+ str ip, [r7, r3]
+3: cmp r4, r5
+ ldrcc r7, [r4], #4 @ use branch for delay slot
+ bcc 2b
+ mov pc, lr
+#endif
+ENDPROC(__fixup_a_pv_table)
+
+ENTRY(fixup_pv_table)
+ stmfd sp!, {r4 - r7, lr}
+ ldr r2, 2f @ get address of __pv_phys_offset
+ mov r3, #0 @ no offset
+ mov r4, r0 @ r0 = table start
+ add r5, r0, r1 @ r1 = table size
+ ldr r6, [r2, #4] @ get __pv_offset
+ bl __fixup_a_pv_table
+ ldmfd sp!, {r4 - r7, pc}
+ENDPROC(fixup_pv_table)
+
+ .align
+2: .long __pv_phys_offset
+
+ .data
+ .globl __pv_phys_offset
+ .type __pv_phys_offset, %object
+__pv_phys_offset:
+ .long 0
+ .size __pv_phys_offset, . - __pv_phys_offset
+__pv_offset:
+ .long 0
+#endif
+
#include "head-common.S"
git.openpandora.org / pandora-kernel.git / blobdiff