* linux/arch/arm/boot/compressed/head.S
*
* Copyright (C) 1996-2002 Russell King
+ * Copyright (C) 2004 Hyok S. Choi (MPU support)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
*/
#ifdef DEBUG
-#include <asm/arch/debug-macro.S>
-
#if defined(CONFIG_DEBUG_ICEDCC)
.macro loadsp, rb
.endm
- .macro writeb, ch, rb
+ .macro writeb, ch, rb
mcr p14, 0, \ch, c0, c1, 0
.endm
#else
+
+#include <asm/arch/debug-macro.S>
+
.macro writeb, ch, rb
senduart \ch, \rb
.endm
-#if defined(CONFIG_FOOTBRIDGE) || \
- defined(CONFIG_ARCH_RPC) || \
- defined(CONFIG_ARCH_INTEGRATOR) || \
- defined(CONFIG_ARCH_PXA) || \
- defined(CONFIG_ARCH_IXP4XX) || \
- defined(CONFIG_ARCH_IXP2000) || \
- defined(CONFIG_ARCH_LH7A40X) || \
- defined(CONFIG_ARCH_OMAP)
- .macro loadsp, rb
- addruart \rb
- .endm
-#elif defined(CONFIG_ARCH_SA1100)
+#if defined(CONFIG_ARCH_SA1100)
.macro loadsp, rb
mov \rb, #0x80000000 @ physical base address
-# if defined(CONFIG_DEBUG_LL_SER3)
+#ifdef CONFIG_DEBUG_LL_SER3
add \rb, \rb, #0x00050000 @ Ser3
-# else
+#else
add \rb, \rb, #0x00010000 @ Ser1
-# endif
+#endif
.endm
#elif defined(CONFIG_ARCH_IOP331)
.macro loadsp, rb
add \rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT
.endm
#else
-#error no serial architecture defined
+ .macro loadsp, rb
+ addruart \rb
+ .endm
#endif
#endif
#endif
kputc #'\n'
kphex r5, 8 /* decompressed kernel start */
kputc #'-'
- kphex r8, 8 /* decompressed kernel end */
+ kphex r9, 8 /* decompressed kernel end */
kputc #'>'
kphex r4, 8 /* kernel execution address */
kputc #'\n'
.word start @ absolute load/run zImage address
.word _edata @ zImage end address
1: mov r7, r1 @ save architecture ID
- mov r8, #0 @ save r0
+ mov r8, r2 @ save atags pointer
#ifndef __ARM_ARCH_2__
/*
/*
* some architecture specific code can be inserted
- * by the linker here, but it should preserve r7 and r8.
+ * by the linker here, but it should preserve r7, r8, and r9.
*/
.text
* r5 = decompressed kernel start
* r6 = processor ID
* r7 = architecture ID
- * r8-r14 = unused
+ * r8 = atags pointer
+ * r9-r14 = corrupted
*/
add r1, r5, r0 @ end of decompressed kernel
adr r2, reloc_start
ldr r3, LC1
add r3, r2, r3
-1: ldmia r2!, {r8 - r13} @ copy relocation code
- stmia r1!, {r8 - r13}
- ldmia r2!, {r8 - r13}
- stmia r1!, {r8 - r13}
+1: ldmia r2!, {r9 - r14} @ copy relocation code
+ stmia r1!, {r9 - r14}
+ ldmia r2!, {r9 - r14}
+ stmia r1!, {r9 - r14}
cmp r2, r3
blo 1b
* r4 = kernel execution address
* r6 = processor ID
* r7 = architecture number
- * r8 = run-time address of "start"
+ * r8 = atags pointer
+ * r9 = run-time address of "start" (???)
* On exit,
- * r1, r2, r3, r8, r9, r12 corrupted
+ * r1, r2, r3, r9, r10, r12 corrupted
* This routine must preserve:
- * r4, r5, r6, r7
+ * r4, r5, r6, r7, r8
*/
.align 5
cache_on: mov r3, #8 @ cache_on function
b call_cache_fn
+/*
+ * Initialize the highest priority protection region, PR7
+ * to cover all 32bit address and cacheable and bufferable.
+ */
+__armv4_mpu_cache_on:
+ mov r0, #0x3f @ 4G, the whole
+ mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
+ mcr p15, 0, r0, c6, c7, 1
+
+ mov r0, #0x80 @ PR7
+ mcr p15, 0, r0, c2, c0, 0 @ D-cache on
+ mcr p15, 0, r0, c2, c0, 1 @ I-cache on
+ mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
+
+ mov r0, #0xc000
+ mcr p15, 0, r0, c5, c0, 1 @ I-access permission
+ mcr p15, 0, r0, c5, c0, 0 @ D-access permission
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
+ mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ @ ...I .... ..D. WC.M
+ orr r0, r0, #0x002d @ .... .... ..1. 11.1
+ orr r0, r0, #0x1000 @ ...1 .... .... ....
+
+ mcr p15, 0, r0, c1, c0, 0 @ write control reg
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
+ mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
+ mov pc, lr
+
+__armv3_mpu_cache_on:
+ mov r0, #0x3f @ 4G, the whole
+ mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
+
+ mov r0, #0x80 @ PR7
+ mcr p15, 0, r0, c2, c0, 0 @ cache on
+ mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
+
+ mov r0, #0xc000
+ mcr p15, 0, r0, c5, c0, 0 @ access permission
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ @ .... .... .... WC.M
+ orr r0, r0, #0x000d @ .... .... .... 11.1
+ mov r0, #0
+ mcr p15, 0, r0, c1, c0, 0 @ write control reg
+
+ mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
+ mov pc, lr
+
__setup_mmu: sub r3, r4, #16384 @ Page directory size
bic r3, r3, #0xff @ Align the pointer
bic r3, r3, #0x3f00
* bits for the RAM area only.
*/
mov r0, r3
- mov r8, r0, lsr #18
- mov r8, r8, lsl #18 @ start of RAM
- add r9, r8, #0x10000000 @ a reasonable RAM size
+ mov r9, r0, lsr #18
+ mov r9, r9, lsl #18 @ start of RAM
+ add r10, r9, #0x10000000 @ a reasonable RAM size
mov r1, #0x12
orr r1, r1, #3 << 10
add r2, r3, #16384
-1: cmp r1, r8 @ if virt > start of RAM
+1: cmp r1, r9 @ if virt > start of RAM
orrhs r1, r1, #0x0c @ set cacheable, bufferable
- cmp r1, r9 @ if virt > end of RAM
+ cmp r1, r10 @ if virt > end of RAM
bichs r1, r1, #0x0c @ clear cacheable, bufferable
str r1, [r0], #4 @ 1:1 mapping
add r1, r1, #1048576
str r1, [r0]
mov pc, lr
-__armv4_cache_on:
+__armv4_mmu_cache_on:
mov r12, lr
bl __setup_mmu
mov r0, #0
mrc p15, 0, r0, c1, c0, 0 @ read control reg
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
orr r0, r0, #0x0030
- bl __common_cache_on
+ bl __common_mmu_cache_on
mov r0, #0
mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
mov pc, r12
-__arm6_cache_on:
+__arm6_mmu_cache_on:
mov r12, lr
bl __setup_mmu
mov r0, #0
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3
mov r0, #0x30
- bl __common_cache_on
+ bl __common_mmu_cache_on
mov r0, #0
mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3
mov pc, r12
-__common_cache_on:
+__common_mmu_cache_on:
#ifndef DEBUG
orr r0, r0, #0x000d @ Write buffer, mmu
#endif
* r5 = decompressed kernel start
* r6 = processor ID
* r7 = architecture ID
- * r8-r14 = unused
+ * r8 = atags pointer
+ * r9-r14 = corrupted
*/
.align 5
-reloc_start: add r8, r5, r0
+reloc_start: add r9, r5, r0
debug_reloc_start
mov r1, r4
1:
.rept 4
- ldmia r5!, {r0, r2, r3, r9 - r13} @ relocate kernel
- stmia r1!, {r0, r2, r3, r9 - r13}
+ ldmia r5!, {r0, r2, r3, r10 - r14} @ relocate kernel
+ stmia r1!, {r0, r2, r3, r10 - r14}
.endr
- cmp r5, r8
+ cmp r5, r9
blo 1b
debug_reloc_end
call_kernel: bl cache_clean_flush
bl cache_off
- mov r0, #0
+ mov r0, #0 @ must be zero
mov r1, r7 @ restore architecture number
+ mov r2, r8 @ restore atags pointer
mov pc, r4 @ call kernel
/*
proc_types:
.word 0x41560600 @ ARM6/610
.word 0xffffffe0
- b __arm6_cache_off @ works, but slow
- b __arm6_cache_off
+ b __arm6_mmu_cache_off @ works, but slow
+ b __arm6_mmu_cache_off
mov pc, lr
-@ b __arm6_cache_on @ untested
-@ b __arm6_cache_off
-@ b __armv3_cache_flush
+@ b __arm6_mmu_cache_on @ untested
+@ b __arm6_mmu_cache_off
+@ b __armv3_mmu_cache_flush
.word 0x00000000 @ old ARM ID
.word 0x0000f000
.word 0x41007000 @ ARM7/710
.word 0xfff8fe00
- b __arm7_cache_off
- b __arm7_cache_off
+ b __arm7_mmu_cache_off
+ b __arm7_mmu_cache_off
mov pc, lr
.word 0x41807200 @ ARM720T (writethrough)
.word 0xffffff00
- b __armv4_cache_on
- b __armv4_cache_off
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
mov pc, lr
+ .word 0x41007400 @ ARM74x
+ .word 0xff00ff00
+ b __armv3_mpu_cache_on
+ b __armv3_mpu_cache_off
+ b __armv3_mpu_cache_flush
+
+ .word 0x41009400 @ ARM94x
+ .word 0xff00ff00
+ b __armv4_mpu_cache_on
+ b __armv4_mpu_cache_off
+ b __armv4_mpu_cache_flush
+
.word 0x00007000 @ ARM7 IDs
.word 0x0000f000
mov pc, lr
.word 0x4401a100 @ sa110 / sa1100
.word 0xffffffe0
- b __armv4_cache_on
- b __armv4_cache_off
- b __armv4_cache_flush
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
+ b __armv4_mmu_cache_flush
.word 0x6901b110 @ sa1110
.word 0xfffffff0
- b __armv4_cache_on
- b __armv4_cache_off
- b __armv4_cache_flush
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
+ b __armv4_mmu_cache_flush
@ These match on the architecture ID
.word 0x00020000 @ ARMv4T
.word 0x000f0000
- b __armv4_cache_on
- b __armv4_cache_off
- b __armv4_cache_flush
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
+ b __armv4_mmu_cache_flush
.word 0x00050000 @ ARMv5TE
.word 0x000f0000
- b __armv4_cache_on
- b __armv4_cache_off
- b __armv4_cache_flush
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
+ b __armv4_mmu_cache_flush
.word 0x00060000 @ ARMv5TEJ
.word 0x000f0000
- b __armv4_cache_on
- b __armv4_cache_off
- b __armv4_cache_flush
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
+ b __armv4_mmu_cache_flush
.word 0x00070000 @ ARMv6
.word 0x000f0000
- b __armv4_cache_on
- b __armv4_cache_off
- b __armv6_cache_flush
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
+ b __armv6_mmu_cache_flush
.word 0 @ unrecognised type
.word 0
cache_off: mov r3, #12 @ cache_off function
b call_cache_fn
-__armv4_cache_off:
+__armv4_mpu_cache_off:
+ mrc p15, 0, r0, c1, c0
+ bic r0, r0, #0x000d
+ mcr p15, 0, r0, c1, c0 @ turn MPU and cache off
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c7, c6, 0 @ flush D-Cache
+ mcr p15, 0, r0, c7, c5, 0 @ flush I-Cache
+ mov pc, lr
+
+__armv3_mpu_cache_off:
+ mrc p15, 0, r0, c1, c0
+ bic r0, r0, #0x000d
+ mcr p15, 0, r0, c1, c0, 0 @ turn MPU and cache off
+ mov r0, #0
+ mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
+ mov pc, lr
+
+__armv4_mmu_cache_off:
mrc p15, 0, r0, c1, c0
bic r0, r0, #0x000d
mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4
mov pc, lr
-__arm6_cache_off:
+__arm6_mmu_cache_off:
mov r0, #0x00000030 @ ARM6 control reg.
- b __armv3_cache_off
+ b __armv3_mmu_cache_off
-__arm7_cache_off:
+__arm7_mmu_cache_off:
mov r0, #0x00000070 @ ARM7 control reg.
- b __armv3_cache_off
+ b __armv3_mmu_cache_off
-__armv3_cache_off:
+__armv3_mmu_cache_off:
mcr p15, 0, r0, c1, c0, 0 @ turn MMU and cache off
mov r0, #0
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
mov r3, #16
b call_cache_fn
-__armv6_cache_flush:
+__armv4_mpu_cache_flush:
+ mov r2, #1
+ mov r3, #0
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+ mov r1, #7 << 5 @ 8 segments
+1: orr r3, r1, #63 << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean & invalidate D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 5
+ bcs 1b @ segments 7 to 0
+
+ teq r2, #0
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+
+__armv6_mmu_cache_flush:
mov r1, #0
mcr p15, 0, r1, c7, c14, 0 @ clean+invalidate D
mcr p15, 0, r1, c7, c5, 0 @ invalidate I+BTB
mcr p15, 0, r1, c7, c10, 4 @ drain WB
mov pc, lr
-__armv4_cache_flush:
+__armv4_mmu_cache_flush:
mov r2, #64*1024 @ default: 32K dcache size (*2)
mov r11, #32 @ default: 32 byte line size
mrc p15, 0, r3, c0, c0, 1 @ read cache type
mcr p15, 0, r1, c7, c10, 4 @ drain WB
mov pc, lr
-__armv3_cache_flush:
+__armv3_mmu_cache_flush:
+__armv3_mpu_cache_flush:
mov r1, #0
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
mov pc, lr
git.openpandora.org / pandora-kernel.git / blobdiff